IP Portal

Sel. IP Name Category Provider Geometry Process Name Status Deliverable Description
adrvc02 Driver
X-FAB
0.60 µm
XC06
PT
Schematic
Layout
Analog Library

XC06: A_CELLS_HV. adrvc02 is a driver circuit for external loads (relays, LEDs, etc). The circuit features NMOS open-drain output (low-side switch). High input voltage makes the output go low (connected to ground).

adrvc02 Driver
X-FAB
0.35 μm
XH035
PT
Schematic
Layout
Analog Library

XH035: A_CELLS_HV. For MOS module only. adrvc02 is a driver circuit for external loads (relays, LEDs, etc). The circuit features PNOS open-drain output (high-side switch). The layout of adrvc02 makes it easy to incorporate in the flat IO ring.

adrvc01 Driver
X-FAB
1.00 µm
XC10
PT
Analog Library
Layout
Schematic

XC10: A_CELLS; A_CELLS_M1. adrvc01 is a driver circuit for external loads (relays, LEDs, etc). The circuit features NMOS open-drain output. The rising slope of the output signal can be controlled by means of a bias current.

adrvc01 Driver
X-FAB
0.60 µm
XC06
PT
Schematic
Layout
Analog Library

XC06: A_CELLS_HV. adrvc01 is a driver circuit for external loads (relays, LEDs, etc). The circuit features NMOS open-drain output (high-side switch). High input voltage makes the output go low (connected to ground). The rising slope of the output signal c

adc8 ADC
X-FAB
0.80 µm
CX08
PT
Schematic
Layout
Analog Library

CX08A: Analog library. ADC8 is a 8-bit analog-to-digital converter which utilizes successive-approximation
technique.

ADC8 ADC
X-FAB
0.60 µm
XB06
PT
Layout
Schematic
Analog Library

XB06: A_CELLS. ADC8 is a 8-bit analog-to-digital converter which utilizes successive-approximation technique.

ADC12DR ADC
A3PICs GmbH
0.60 µm
XB06
PT
GDSII

The ADC12DR is a SAR-based low-power ADC with a 12bit resolution. Its fully differential input stage features a rail-to-rail input range. At a sampling rate of 2MS/s a power consumption of only 10mW is attained applying a 5V power suppl

adc10 ADC
X-FAB
0.80 µm
CX08
PT
Analog Library
Layout
Schematic

CX08A: Analog library. ADC10 is a 10-bit analog-to-digital converter which utilizes successive approximation technique.

ADC10 ADC
X-FAB
0.60 µm
XB06
PT
Layout
Schematic
Analog Library

XB06: A_CELLS. ADC10 is a 10-bit analog-to-digital converter which utilizes successive approximation technique.

adacc03 DAC
X-FAB
1.00 µm
XC10
PT
Analog Library
Layout
Schematic

XC10: A_CELLS; A_CELLS_M1. adacc03 is a 8-bit voltage-scaling digital-to-analog converter (DAC). The device can operate at supply and reference voltages down to 3.2V.

adacc03 DAC
X-FAB
0.60 µm
XC06
PT
Layout
Schematic
Analog Library

XC06: A_CELLS. adacc03 is a 8-bit voltage-scaling (potentiometric) digital-to-analog converter (DAC). The adacc03 DAC operates with a single 5V power supply and external reference voltage.

adacc03 DAC
X-FAB
0.60 µm
XT06
PT
Layout
Schematic
Analog Library

XT06

adacc02 DAC
X-FAB
1.00 µm
XC10
PT
Analog Library
Layout
Schematic

XC10: A_CELLS; A_CELLS_M1. adacc02 is a 10-bit digital-to-analog converter (DAC) with a R-2R ladder network. The DAC operates with a single 5V supply and external reference voltage.

adacc02 DAC
X-FAB
0.60 µm
XC06
PT
Layout
Schematic
Analog Library

XC06: A_CELLS. adacc02 is a 8-bit R-2R digital-to-analog converter (DAC). The DAC operates with a single 5V power supply and external reference voltage.

adacc02 DAC
X-FAB
0.35 μm
XH035
PT
Layout
Schematic
Analog Library

XH035: A_CELLS. For MOS module only. adacc02 is a bit-bit voltage-scaling (potentiometric) Digital-to-Analog converter (DAC). The DAC operates with a single 3.3V power supply and external reference voltage.

adacc02 DAC
X-FAB
0.60 µm
XT06
PT
Layout
Schematic
Analog Library

XT06 adacc02 is an 8-bit R-2R digital-to-analog converter (DAC). The adacc02 DAC operates with a single 5V power supply and external reference voltage.

adacc01_5v ADC
X-FAB
0.18 μm
XC018
PT
Analog Library
Layout
Schematic

XC018 LP 5V is a 10-bit voltage -scaling (potentiometric) digital-to-analog converter (DAC). The DAC operates with a single 5.0V analog power supply, a 1.8V digital power supply and external reference voltage.

adacc01_3v3 DAC
X-FAB
0.18 μm
XC018
PT
Layout
Schematic
Analog Library

XC018 LP 3.3V adacc01_3v3 is a 10-bit voltage-scaling (potentionetric) Digital-to-Analog converter (DAC). The adacc01 DAC operates with a single 3.3V power supply and external reference voltage.

adacc01_3v3 DAC
X-FAB
0.18 μm
XH018
PT
Analog Library
Layout
Schematic

XH018 LP3MOS 3.3V adacc01_3v3 is a 10-bit voltage-scaling (potentiometric) Digital-to-Analog converter. The adacc01 DAC operates with a single 3.3V analog power supply; a 1.8V digital power supply and an external reference voltage.

adacc01 DAC
X-FAB
1.00 µm
XC10
PT
Analog Library
Layout
Schematic

XC10: A_CELLS; A_CELLS_M1. adacc01 is a 8-bit digital-to-analog converter (DAC) with a R-2R ladder network. The DAC operates with a single 5V supply and external reference voltage.

adacc01 DAC
X-FAB
0.60 µm
XC06
PT
Layout
Schematic
Analog Library

XC06: A_CELLS. adacc01 is a 10-bit voltage-scaling (potentiometric) digital-to-analog converter (DAC). The adacc01 DAC operates with a single 5V power supply and external reference voltage.

adacc01 DAC
X-FAB
0.60 µm
XT06
PT
Layout
Schematic
Analog Library

XT06 adacc01 is a 10-bit voltage-scaling (potentiometric) digital-to-analog converter (DAC). The adacc01 DAC operates with a single 5V power supply and external reference voltage.

acsoc02_5v Current Source
X-FAB
0.18 μm
XC018
PT
Layout
Schematic
Analog Library

XC018 LP 5v acsoc02_5v is a compact general purpose current source. The circuit has four outputs that drive currents of 200nA each.

acsoc02_3v3 Current Source
X-FAB
0.18 μm
XC018
PT
Layout
Schematic
Analog Library

XC018 LP 3.3V acsoc02_3v3 is a compact general purpose current source. The circuit has four outputs that drive currents of 1µA; 2µA; 4µA; and 8µA, respectively.

acsoc02_3v3 Oscillator
X-FAB
0.18 μm
XH018
PT
Analog Library
Layout
Schematic

XH018 LP3MOS 3.3V acsoc02_3v3 is a compact general purpose current source. The circuit has four outputs that drive currents of 1µA; 2µA; 4µA; and 8µA, respectively.

acsoc02 Bias
X-FAB
0.35 μm
XH035
PT
Layout
Schematic
Analog Library

XH035: A_CELLS. For MOS module only. acsoc02 is a general purpose current source. The circuit drives a current of 2µA (approx.) at each of its outputs. No reference voltage is necessary.

acsoc01_5v Current Source
X-FAB
0.18 μm
XC018
PT
Layout
Schematic
Analog Library

XC018 LP 5v acsoc01_5v is a compact general purpose current source. The circuit has four outputs that drive currents of 1µA, 2µA, 4µA, and 8µA, respectively.

acsoc01_3v3 Current Source
X-FAB
0.18 μm
XC018
PT
Layout
Schematic
Analog Library

XC018 LP 3.3V acsoc01_3v3 is a compact general purpose current source. The circuit has four outputs that drive currents of 200nA each. 

acsoc01_3v3 Current Source
X-FAB
0.18 μm
XH018
PT
Analog Library
Layout
Schematic

XH018 LP3MOS 3.3V acsoc01_3v3 is a compact general purpose current source. The circuit has four outputs that drive currents of 200nA each. The current outputs can be connected in parallel in order to obtain bigger output currents in the 200nA-800nA range.

acsoc01 Bias
X-FAB
0.35 μm
XH035
PT
Layout
Schematic
Analog Library

XH035: A_CELLS. For MOS module only. acsoc01 is a general purpose current source. The circuit drives a current of 2µA (approx.) at each of its outputs.

 

MP = Mass ProductionPT = Prototyping, Silicon provenID = in DesignVS = Verified by Simulations (Soft-IP)

Displaying results 241 to 270 out of 371

*Disclaimer:
The Intellectual Partner Network is a web database provided by X-FAB in cooperation with selected partners. Both X-FAB and a variety of different IP supplier offer their IP to customers using X-FAB’s foundry process. X-FAB will support customers to get in direct contact with the relevant IP supplier.

X-FAB will take no responsibility nor any liability whatsoever for the information or products offered or provided by the other IP suppliers at the database of the Intellectual Partner Network. X-FAB shall have no liability towards the customers for any use of and/or reliance of the products provided by the other IP suppliers at the database of the Intellectual Partner Network.

X-FAB's own IP is subject to a license agreement. X-FAB IP marked with “*” are part of the Master Kit or Master Kit Plus library. If you can not find the IP you are looking for, please contact the respective sales manager in your region. We continuously extend our libraries and offer a custom cell development service as well.