IP Portal

Sel. IP Name Category Provider Geometry Process Name Status Deliverable Description
arcoc01 Oscillator
X-FAB
0.60 µm
XT06
PT
Layout
Schematic
Analog Library

XT06 arcoc01 is a 100kHz oscillator with internal R and C.

arcoc02 Oscillator
X-FAB
0.60 µm
XT06
PT
Layout
Schematic
Analog Library

XT06 arcoc02 is a 200kHz adjustable, current balancing RC oscillator with internal R and C.

arcoc03 Oscillator
X-FAB
0.60 µm
XT06
PT
Layout
Schematic
Analog Library

XT06 arcoc03 is a compact, low-power 10kHz oscillator with internal R and C. The cell is suitable for applications where accuracy and stability are not crucial.

arcoc04 Oscillator
X-FAB
0.60 µm
XT06
PT
Layout
Schematic
Analog Library

XT06 arcoc04 is a 200kHz fixed frequency, current balancing RC oscillator with internall R and C.

arcoc05 Oscillator
X-FAB
0.60 µm
XT06
PT
Layout
Schematic
Analog Library

XT06 arcoc05 is a 1MHz fixed frequency, current balancing RC oscillator with internal R and C.

arcoc06 Oscillator
X-FAB
0.60 µm
XT06
PT
Layout
Schematic
Analog Library

XT06 arcoc06 is a 1MHz adjustable, current balancing RC oscillator with internal R and C.

arcoc07 Oscillator
X-FAB
0.60 µm
XT06
PT
Layout
Schematic
Analog Library

XT06 arcoc07 is a 10kHz low-power oscillator with internal R and C.

arcoc08 Oscillator
X-FAB
0.60 µm
XT06
PT
Layout
Schematic
Analog Library

XT06 arcoc08 is a 10MHz low-power oscillator with internal R and C.

arcoc09 Oscillator
X-FAB
0.60 µm
XT06
PT
Layout
Schematic
Analog Library

XT06 arcoc09 is a 20MHz low-power oscillator with internal R and C.

axtoc01 Crystal Oscillators
X-FAB
0.60 µm
XT06
PT
Layout
Schematic
Analog Library

XT06 axtoc01 is a 32kHz crystal oscillator for 3.5 to 5.5V supply voltage range. An external quartz has to be connected to XTALIN and XTALOUT pins.

axtoc02 Crystal Oscillators
X-FAB
0.60 µm
XT06
PT
Layout
Schematic
Analog Library

XT06 axtoc02 is a 1...4MHz crystal oscillator for supply voltage range from 3.5 to 5.5V. An external quartz crystal as to be connected to XTALIN and XTALOUT pins.

axtoc03 Crystal Oscillators
X-FAB
0.60 µm
XT06
PT
Layout
Schematic
Analog Library

XT06 axtoc03 is a 1...6MHz crystal oscillator for supply voltage range from 3.3 to 5.5V. An external quartz crstal has to be connected to XTALIN and XTALOUT pins.

aporc01 Power on Reset
X-FAB
0.60 µm
XT06
PT
Layout
Schematic
Analog Library

XT06 aporc01 is a dynamic Power-on-Reset circuit. During power-on, POR output is kept high as long as the supply voltage is below the POR threshold voltage. When the threshold voltage is reached, the POR signal turns low.

aporc02 Power on Reset
X-FAB
0.60 µm
XT06
PT
Layout
Schematic
Analog Library

XT06 aporc02 is a Power-on-Reset circuit with hysteresis. Reset signal are generated on both the rising and failing edge of the supply voltage. During power-on, POR outputs is kept high as long as the supply voltage is below the threshold voltage.

aporc03 Power on Reset
X-FAB
0.60 µm
XT06
Layout
Schematic
Analog Library

XT06 aporc03 is a Power-on-Rest circuit. Reset signals are generated on both the rising and falling edge of the supply voltage. During power-on, POR output is kept high as long as the supply voltage is below the high threshold.

achpc01 Charge Pumps
X-FAB
0.60 µm
XT06
PT
Layout
Schematic
Analog Library

XT06 achpc01 is a doubling charge pump 3.3V => 5.6V.

TI-RF-CMP Comparators
Thesys-Intechna
0.60 µm
XT06
VS
GDSII
Schematic

TI-RF-CMP is a low power CMOS RF comparator with 4 ns propagation delay and latch function. ESD protection provided.

TI-RF-DRV Driver
Thesys-Intechna
0.60 µm
XT06
VS
GDSII
Schematic

TI-RF-DRV is a fully differential RF driver for differential signal processing applications. Common-mode level of differential outputs is adjustable that allows to shift easily the input signals for driving single-supply ADCs. ESD protection provided.

TI-RF-MUX Multiplexer
Thesys-Intechna
0.60 µm
XT06
VS
GDSII
Schematic

TI-RF-MUX is a 4-to-1 RF multiplexer designed with an internal current feedback output amplifier whose gain can be adjusted externally. There is a possibility of optional usage of two 4-to-1 devices as one 8-to-1 multiplexer. ESD protection provided.

TI-Manchester Transceiver
Thesys-Intechna
0.60 µm
XT06
VS
GDSII
Schematic

TI-Manchester is a dual data bus transceiver designed for receiving CMOS/TTL Manchester II data, converting it and transmitting through a stepup transformer to the data bus...

TI-16PI/150M ADC
Thesys-Intechna
0.18 μm
XT018
VS
GDSII
Schematic

TI-16PI/150M is a dual-channel fully differential 16-bit ADC with pipelined architecture optimized for high dynamic performance at sample rates up to 180 MSPS.

8b-20 Msps ADC with 4 :1 Mux ADC
EASii IC
0.18 μm
XP018
VS
Layout
Schematic

High Speed 8 bits ADC running at 20 MSps including an analog multiplexer 4:1
Only  2 clock latency
power :22mW
Voltage supply: 3.3V

aopac01 Operational Amplifier
X-FAB
0.35 μm
XH035
PT
Layout
Schematic
Analog Library

XH035: A_CELLS. For MOS module only. aopac01 is a general purpose internally compensated CMOS OpAmp with N-MOS input stage and rail-to-tail output stage.

aopac02 Operational Amplifier
X-FAB
0.35 μm
XH035
PT
Layout
Schematic
Analog Library

XH035: A_CELLS. For MOS module only. aopac02 is a general purpose internally compensated CMOS OpAmp with P-MOS input stage and rail-to-rail output stage.

aopac03 Operational Amplifier
X-FAB
0.35 μm
XH035
PT
Layout
Schematic
Analog Library

XH035: A_CELLS. For MOS module only. aopac03 is a general purpose internally compensated rai-to-rail input, rail-to-rail output CMOS OpAmp. It features low input offset voltage and high output driving capabilities.

aopac04 Operational Amplifier
X-FAB
0.35 μm
XH035
PT
Layout
Schematic
Analog Library

XH035: A_CELLS. For MOS module only. aopac04 is a general purpose internally compensated rail-to-rail input, rail-to-rail output CMOS OpAmp. Features precision quiescent current control & high output driving capabilities.

aopac05 Operational Amplifier
X-FAB
0.35 μm
XH035
PT
Layout
Schematic
Analog Library

XH035: A_CELLS. For MOS module only. aopac05 is a low-power internally compensated with P-MOS input and rail-to-rail output.

aopac06 Operational Amplifier
X-FAB
0.35 μm
XH035
PT
Layout
Schematic
Analog Library

XH035: A_CELLS. For MOS module only. aopac06 is a fast internally compensated with N-MOS input and rail-to-rail output.

aopac08 Operational Amplifier
X-FAB
0.35 μm
XH035
PT
Layout
Schematic
Analog Library

XH035: A_CELLS. For MOS module only. aopac08 is a general purpose internally compensated operational amplifier with N-MOS input and emitter-follower output.

aopac12 Operational Amplifier
X-FAB
0.35 μm
XH035
PT
Layout
Schematic
Analog Library

XH035: A_CELLS. For MOS module only. aopac12 is an internally compensated CMOS differential input - differential output (DIDO) operational amplifier with P-MOS input stage and rail-to-rail output stages.

 

MP = Mass ProductionPT = Prototyping, Silicon provenID = in DesignVS = Verified by Simulations (Soft-IP)

Displaying results 31 to 60 out of 371

*Disclaimer:
The Intellectual Partner Network is a web database provided by X-FAB in cooperation with selected partners. Both X-FAB and a variety of different IP supplier offer their IP to customers using X-FAB’s foundry process. X-FAB will support customers to get in direct contact with the relevant IP supplier.

X-FAB will take no responsibility nor any liability whatsoever for the information or products offered or provided by the other IP suppliers at the database of the Intellectual Partner Network. X-FAB shall have no liability towards the customers for any use of and/or reliance of the products provided by the other IP suppliers at the database of the Intellectual Partner Network.

X-FAB's own IP is subject to a license agreement. X-FAB IP marked with “*” are part of the Master Kit or Master Kit Plus library. If you can not find the IP you are looking for, please contact the respective sales manager in your region. We continuously extend our libraries and offer a custom cell development service as well.