IP Portal

XH018 LPMOS 1.8V abgpc04_1v8 is a general purpose multivoltage 0.1V-0.8V bandgap regerence with output voltage trimming.

18-28V VDD, 12V Vref, 26-40V Vout Chargepump with 2 external diodes and external Cfly capacitors, for HS gate driving.  Includes programmability of operating freq (nom 4MHz), dead time, slew rate and drive strength.Area 1mm². Verified by Simulation for XH035.

XC018 LP 3.3V abiac01_3v3 is a general purpose bias cell. The circuit forces a current of 200nA (approx.) to flow through PMOS with W/L ratio of 8µm/10µm and NMOS with W/L ratio of 4µm/20µm.

XC018 LP 3.3V abiac02_3v3 is a general purpose bias cell. The circuit forces a current of 2µA (approx.) to flow through PMOS with W/L ratio of 10µm/4µm and NMOS with W/L ratio od 6µm/12µm.

XC018 LP 3.3V abiac03_3v3 is a general purpose bias cell. The circuit forces a current of 10µA (approx.) to flow through PMOS with W/L ratio of 24µm/2µm and NMOS with W/L ratio od 14µm/6µm.

XC018 LP 3.3V acsoc01_3v3 is a compact general purpose current source. The circuit has four outputs that drive currents of 200nA each. 

XC018 LP 3.3V acsoc02_3v3 is a compact general purpose current source. The circuit has four outputs that drive currents of 1µA; 2µA; 4µA; and 8µA, respectively.

XC018 LP 3.3V aopac01_3v3 is a general purpose internally compensated CMOS OpAmp with N-MOS input stage and rail-to-rail output stage. The speed, gain bandwidth, and the power consumption of the amplifier are set by means of a bias current.

XC018 LP 3.3V aopac02_3v3 is a general purpose internally compensated CMOS OpAmp with P-MOS input stage and rail-to-rail output stage. The speed, gain bandwidth, and the power consumption of the amplifier are set by means of bias current.

XC018 LP 3.3V acmpc01_3v3 is a low-power current-programmable CMOS comparator with hysteresis. The input stage is P-MOS differential pair. The speed and power consumption of the comparator can be controlled by means of the bias current through the IBN inp

XC018 LP 3.3V acmpc02_3v3 is a low-power current-programmable CMOS comparator with hysteresis. The input stage is N-MOS differential pair.

XC018 LP 3.3V acmpc03_3v3 is a rail-to-rail input, current-programmable CMOS comparator. The speed and power consumption of the comparator can be controlled by means of the bias current through the IBN input.

XC018 LP 3.3V aadcc01_3v3 is a 10-bit successive approximation Analog-to-Digital converter (ADC). The ADC operates with a single 3.3V power supply and an external voltage reference.

XC018 LP 3.3V adacc01_3v3 is a 10-bit voltage-scaling (potentionetric) Digital-to-Analog converter (DAC). The adacc01 DAC operates with a single 3.3V power supply and external reference voltage.

XC018 LP 5V abiac06_5v is a general purpose bias cell. The circuit forces a current of 10µA (approx.) to flow through PMOS with W/L ratio of 24µm/3µm and NMOS with W/L ratio of 10µm/4µm.

XC018 LP 5V abiac07_5v is a general purpose bias cell. The circuit forces a current of 2µA (approx.) to flow through PMOS with W/L ratio of 10µm/6µm and NMOS with W/L ratio of 10µm/12µm.

XC018 LP 5v acsoc01_5v is a compact general purpose current source. The circuit has four outputs that drive currents of 1µA, 2µA, 4µA, and 8µA, respectively.

XC018 LP 5v acsoc02_5v is a compact general purpose current source. The circuit has four outputs that drive currents of 200nA each.

XC018 LP 5V aopac01_5v is a general purpose internally compensated CMOS OpAmp with N-MOS input stage and rail-to-rail output stage. The speed, gain bandwidth, and the power consumption of the amplifier are set by means of bias current.

XC018 LP 5V aopac02_5v is a general purpose internally compensated CMOS OpAmp withP-MOS input stage and rail-to-rail output stage. The speed, gain bandwidth, and the power consumption of the amplifier are set by means of bias current.

XC018 LP 5V acmpc01_5v is a low-power current-programmable CMOS comparator with hysteresis. The input stage is P-MOS differential pair. The speed and power consumption of the comparator can be controlled by means of the bias current through the IBN input.

XC018 LP 5V acmpc02_5v is a low-power current-programmable CMOS comparator with hysteresis. The input stage is N-MOS differential pair. The speed and power consumption of the comparator can be controlled by means of the bias current through the IBN input.

XC018 LP 5V arcoc01_5v is a robust 100kHz RC oscillator with internal R and C. The cell features very low temperature coefficient of clock frequency and low power consumption.

XC018 LP 5V arcoc02_5v is a robust 1MHz RC oscillator with internal R and C. The cell features very low temperature coefficient of clock frequency and low power consumption.

XC018 LP 5V arcoc03_5v is an adjustable 100kHz, current-balancing RC oscillator with internal R and C. The very low temperature coefficient of clock frequency combined with trimming inputs, very low power consumption and compact size make the cell ideal s

XC018 LP 5V arcoc04_5v is an adjustable 1MHz, current-balancing RC oscillator with internal R and C. The very low temperature coefficient of the clock frequency combined with trimming inputs, very low power consumption and compact size make the cell ideal

XC018 LP 5V aporc01_5v is a dynamic Power-on-Reset (POR) circuit. During power-on, POR output follows the supply voltage as long as it is below the threshold voltage. When the threshold voltage is reached, the POR signal turns low.

XC018 LP 5V aporc02_5v is a Power-on-Reset (POR) circuit with hysteresis. Reset signals are generated on both the rising and falling edge of the supply voltage.

XC018 LP 5V aporc03_5v is a Power-on-Reset (POR) circuit. Reset signals are generated on both the rising and falling edge of the supply voltage.

Low power voltage regulator for 1.8V logic, requires only an external capacitor, available for XC018/XH018 MOS3LP and MOS5LP, different option available on request.