IP Portal

Low power crystal oscillator for resonator with fast start-up, available for XC018/XH018 MOS3LP, including pads, different pads on request.

XC018 LP 3.3V abgpc01 is a general purpose low-power bandgap reference with N-well resistors.

XC018 LP 3.3V abgpc02 is a general purpose low-power bandgap reference with rnp1 resistors

XC018 LP 3.3V abgpc03 is a low-voltage bandgap reference with N-well resistors.

XC018 LP 3.3V aopac03_3v3 is a general purpose internally compensated rail-to-rail input, rail-to-rail output CMOS operational amplifier (OpAmp). The speed, gain bandwidth, and the power consumption of the amplifier are set by means of a bias curren

XC018 LP 3.3V aopac06_3v3 is a general purpose internally compensated rail-to-rail input, rail-to-rail output CMOS operational amplifier (OpAmp).

XC018 LP 3.3V aopac07_3v3 is a general purpose internally compensated rail-to-rail input, railt-to-rail ouput CMOS operational ampl;ifier (OpAmp).

XC018 LP 3.3V aopac08_3v3 is a general internally compensated NMOS input, rail-to-rail output CMOS operational amplifier (OpAmp).

XC018 LP 3.3V aopac09_3v3 is a general purpose internally compensated PMOS input, rail-to-rail output CMOS operational amplifier (OpAmp).

XC018 LP 3.3V axtoc01_3v3 is a robust 32.768 kHz crystal oscillator for supply voltage range from 2.4 to 3.6V.

XC018 LP 3.3V axtoc02_3v3 is a robust 1-4 MHz crystal oscillator for supply voltage range from 2.4 to 3.6V.

XC018 LP 3.3V aporc01_3v3 is a dynamic power-on-reset circuit (POR). The cell is suitable for applicaitons where low consumption is important.

XC018 LP 3.3V aporc02_3v3 is a Power-on-Reset circuit with hysteresis. Reset signals are generated on both the rising and falling edge of the supply voltage.

XC018 LP 3.3V aporc03_3v3 is a Power-on-Rest circuit. Reset signals are generated on both the rising and falling edge of the supply voltage.

XC01801_3v3 is a 3.3V/1.8V linear voltage regulator for up to 20mA load current and internal bandgap reference. The regulator is implimented as a macro cell that fits into the core-limited I/O ring.

XC018 LP 3.3V atmpc01_3v3 is an over-temperature detector. When the chip temperature rises over the high threshold temperature (~130°C) the output signal turns high.

XC018 LP 3.3V avcoc01_3v3 is a voltage controlled oscillator (VCO).

XC018 LP 5V abgpc01_5v is a general purpose low-power bandgap reference with N-well resistors. The cell features wide range of supply voltage and operation temperatures, compact size and low power consumption.

XC018 LP 5V abgpc02_5v is a robust low-power bandgap reference with polysilicon resistors. The cell features wide range of supply voltage and operation temperatures, compact size and low power consumption.

XC018 LP 5V abgpc03_5v is a robust low-voltage bandgap reference with N-well resistors. The cell features wide range of supply voltages and is stable with large capacitive loads.

XC018 LP 5V abgpc04_5v is a robust low-voltage bandgap reference with N-well resistors. The cell features wide range of supply voltage and is stable even with large capacitive loads.

XC018 LP 5V aopac03_5v is a general purpose internally compensated CMOS OpAmp with N-MOS input and rail-to-rail output stage.

XC018 LP 5V aopac04_5v is a general purpose internally compensated CMOS OpAmp with P-MOS input stage and rail-to-rail output stage.

XC018 LP 5V acmpc03_5v is a rail-to-rail input, current-programmable CMOS comparator.

XC018 LP 5V axtoc01_5v is a robust 32.7689 kHz crystal oscillator for supply voltage range from 3.5V to 5.5V.

XC018 LP 5V axtoc02-5v is a robust 1-4 MHz crystal oscillator for supply voltage range from 3.5V to 5.5V.

XC018 LP 5V aadcc01_5v is a 10-bit successive approximation Analog-to-Digital converter (ADC). The ADC operated with a single 5.0V analog power supply, 1.8V digital power supply and an external voltage reference.

XC018 LP 5V is a 10-bit voltage -scaling (potentiometric) digital-to-analog converter (DAC). The DAC operates with a single 5.0V analog power supply, a 1.8V digital power supply and external reference voltage.

XC018 LP 5V atmpc01_5v is an over-temperature detector. When the chip temperature rises over the high threshold temperature (~125°C) the output signal turns high.

 XH018 LPMOS 1.8V abgpc01_1v8 is a general purpose 1.2V bandgap reference with N-well resistirs and PNP (qpvc) diode matrix