IP Portal

Sel. IP Name Category Provider Geometry Process Name Status Deliverable Description
acmpc02_1v8 Comparators
X-FAB
0.18 μm
XT018
PT
Schematic
Layout
Analog Library

XT018 LP5MOS acmpc02_1v8 is a general purpose current-programmable CMOS comparator with NMOS input stage. This cell provides propagation delay time range 738 to 222 ns at 100mV overdrive.

acmpc03_1v8 Comparators
X-FAB
0.18 μm
XT018
PT
Schematic
Layout
Analog Library

XT018 LP5MOS acmpc03_1v8 is a general purpose current-programmable CMOS comparator with PMOS input stage. This cell provides propagation delay time range 56 to 21 ns at 100mV overdrive.

acmpc04_1v8 Comparators
X-FAB
0.18 μm
XT018
PT
Schematic
Layout
Analog Library

XT018 LP5MOS acmpc04_1v8 is a low power current-programmable CMOS comparator with PMOS input stage. This cell provides propagation delay time range 717 to 351 ns at 100mV overdrive.

acmpc05_1v8 Comparators
X-FAB
0.18 μm
XT018
PT
Schematic
Layout
Analog Library

XT018 LP5MOS acmpc05_1v8 is a general purpose current-programmable CMOS comparator with native NMOS input stage. This cell provides propagation delay time range 311 to 125 ns at 100mV overdrive.

acmpc06_1v8 Comparators
X-FAB
0.18 μm
XT018
PT
Schematic
Layout
Analog Library

XT018 LP5MOS acmpc06_1v8 is a general purpose current-programmable CMOS comparator with rail-to-rail (NMOS+native NMOS) input stage. This cell provides propagation delay time range 306 to 115 ns at 100mV overdrive.

acmpc07_1v8 Comparators
X-FAB
0.18 μm
XT018
PT
Schematic
Layout
Analog Library

XT018 LP5MOS acmpc07_1v8 is a general purpose current-programmable CMOS comparator with rail-to-rail (NMOS+PMOS) input stage. This cell provides propagation delay time range 1158 to 335 ns at 100mV overdrive.

acmpc01_5v Comparators
X-FAB
0.18 μm
XT018
PT
Schematic
Layout
Analog Library

XT018 LP5MOS/MOS5 acmpc01_5v is a low power current-programmable CMOS comparator with hysteresis. The input stage is PMOS differential pair.

acmpc02_5v Comparators
X-FAB
0.18 μm
XT018
PT
Schematic
Layout
Analog Library

XT018 LP5MOS/MOS5 acmpc02_5v is a low power current-programmable CMOS comparator with hysteresis. The input stage is NMOS differential pair.

acmpc03_5v Comparators
X-FAB
0.18 μm
XT018
PT
Schematic
Layout
Analog Library

XT018 LP5MOS/MOS5 acmpc03_5v is a rail-to-rail, current-programmable CMOS comparator.

acmpc02ji Comparators
X-FAB
0.35 μm
XU035
PT
Schematic
Layout
Analog Library

XU035: A_CELLS. Acmpc02ji is a low-power current-programmable CMOS comparator with hysteresis. The input stage is PMOS differential pair.

acmpc03ji Comparators
X-FAB
0.35 μm
XU035
PT
Schematic
Layout
Analog Library

XU035: A_CELLS. Acmpc03ji is a low-power current-programmable CMOS comparator with hysteresis. The input stage is NMOS differential pair.

acmpc04ji Comparators
X-FAB
0.18 μm
XU035
PT
Schematic
Layout
Analog Library

XU035: A_CELLS. Acmpc04ji is a rail-to-rail input, current-programmable CMOS comparator.

xpscmpc01_5V Comparators
X-FAB
0.35 μm
XU035
PT
Schematic
Layout
Analog Library

XU035: XSMPS_CELLS. Xpscmpc01_5V is an application specific, general purpose junction isolated CMOS comparator with PMOS input stage.

acmpc01 Comparators
X-FAB
1.00 µm
XDH10
PT
Schematic
Layout
Analog Library

XDH10: A_CELLS. Acmpc01 is a compact low-power CMOS comparator with hysteresis. The input stage is PMOS differential pair.

acmpc02 Comparators
X-FAB
1.00 µm
XDH10
PT
Schematic
Layout
Analog Library

XDH10: A_CELLS. Acmpc02 is a compact low-power CMOS comparator with hysteresis. The input stage is NMOS differential pair.

acmpc03 Comparators
X-FAB
1.00 µm
XDH10
PT
Schematic
Layout
Analog Library

XDH10: A_CELLS. Acmpc03 is a rail-to-rail CMOS comparator.

acmpc04 Comparators
X-FAB
1.00 µm
XDH10
PT
Schematic
Layout
Analog Library

XDH10: A_CELLS. Acmpc04 is a current-programmable rail-to-rail CMOS voltage comparator. The speed and power consumption of cell are programmed by means of bias current.

acmpc01 Comparators
X-FAB
1.00 µm
XDM10
PT
Schematic
Layout
Analog Library

XDM10: A_CELLS. Acmpc01 is a compact low-power CMOS comparator with hysteresis. The input stage is PMOS differential pair.

acmpc02 Comparators
X-FAB
1.00 µm
XDM10
PT
Schematic
Layout
Analog Library

XDM10: A_CELLS. Acmpc02 is a compact low-power CMOS comparator with hysteresis. The input stage is NMOS differential pair.

acmpc03 Comparators
X-FAB
1.00 µm
XDM10
PT
Schematic
Layout
Analog Library

XDM10: A_CELLS. Acmpc03 is a rail-to-rail CMOS comparator.

acmpc04 Comparators
X-FAB
1.00 µm
XDM10
PT
Schematic
Layout
Analog Library

XDM10: A_CELLS. Acmpc04 is a current-programmable rail-to-rail CMOS voltage comparator. The speed and power consumption of cell are programmed by means of bias current.

D17IP05 Current / Voltage Reference
Desert Microtechnology
0.35 μm
XH035
MP
GDSII
Schematic

D17IP05 is both a current and voltage reference. The current reference uses a negative TC resistor and VBE to reduce the temperature dependence. The output currents are 2µA and a programmable 200nA, 400nA, 800nA, or 1µA, sinking current. 

D17IP06 Current / Voltage Reference
Desert Microtechnology
0.35 μm
XH035
MP
GDSII
Schematic

D17IP06 is a digitally configurable current and voltage generator.  The reference includes a temperature compensated current and voltage source.  Output of the amplifiers can drive capacitive modes and settle with 16 bit accuracy within 500ns.

D17IP11 Current / Voltage Reference
Desert Microtechnology
0.35 μm
XH035
MP
GDSII
Schematic

D17IP11 is both a current and voltage reference with trimming capability.  The current reference uses a negative TC resistor and VBE to reduce the temperature dependence.  The output currents are 2µA and 1µA x2.

HT_CSC Current Sensor
Silansys
0.35 μm
XA035
MP
Verilog
GDSII

Programmable Trip Current Sense Instrumentation Amp and Comparator.  Differential input assumes 0.01Ω sense resistor. Gain prog of 19x or 38x. FSR=50mV/100mV. Trip Voltage 40/60/90 mV. Latched comparator o/p. Verified by Simulation for XH035.

acsoc01_3v3 Current Source
X-FAB
0.18 μm
XC018
PT
Schematic
Layout
Analog Library

XC018 LP 3.3V acsoc01_3v3 is a compact general purpose current source. The circuit has four outputs that drive currents of 200nA each. 

acsoc02_3v3 Current Source
X-FAB
0.18 μm
XC018
PT
Schematic
Layout
Analog Library

XC018 LP 3.3V acsoc02_3v3 is a compact general purpose current source. The circuit has four outputs that drive currents of 1µA; 2µA; 4µA; and 8µA, respectively.

acsoc01_5v Current Source
X-FAB
0.18 μm
XC018
PT
Schematic
Layout
Analog Library

XC018 LP 5v acsoc01_5v is a compact general purpose current source. The circuit has four outputs that drive currents of 1µA, 2µA, 4µA, and 8µA, respectively.

acsoc02_5v Current Source
X-FAB
0.18 μm
XC018
PT
Schematic
Layout
Analog Library

XC018 LP 5v acsoc02_5v is a compact general purpose current source. The circuit has four outputs that drive currents of 200nA each.

acsoc01_3v3 Current Source
X-FAB
0.18 μm
XH018
PT
Analog Library
Layout
Schematic

XH018 LP3MOS 3.3V acsoc01_3v3 is a compact general purpose current source. The circuit has four outputs that drive currents of 200nA each. The current outputs can be connected in parallel in order to obtain bigger output currents in the 200nA-800nA range.

 


MP = Mass ProductionPT = Prototyping, Silicon provenID = in DesignVS = Verified by Simulations (Soft-IP)

Displaying results 241 to 270 out of 782

*Disclaimer:
The Intellectual Partner Network is a web database provided by X-FAB in cooperation with selected partners. Both X-FAB and a variety of different IP supplier offer their IP to customers using X-FAB’s foundry process. X-FAB will support customers to get in direct contact with the relevant IP supplier.

X-FAB will take no responsibility nor any liability whatsoever for the information or products offered or provided by the other IP suppliers at the database of the Intellectual Partner Network. X-FAB shall have no liability towards the customers for any use of and/or reliance of the products provided by the other IP suppliers at the database of the Intellectual Partner Network.

X-FAB's own IP is subject to a license agreement. X-FAB IP marked with “*” are part of the Master Kit or Master Kit Plus library. If you can not find the IP you are looking for, please contact the respective sales manager in your region. We continuously extend our libraries and offer a custom cell development service as well.