IP Portal

Sel. IP Name Category Provider Geometry Process Name Status Deliverable Description
aopac11 Operational Amplifier
X-FAB
0.60 µm
XT06
PT
Layout
Schematic
Analog Library

XT06 aopac11 is a low-power, internally compensated CMOS OpAmp with P-MOS input stage and N-MOS source follower output stage.

aopac12 Operational Amplifier
X-FAB
0.60 µm
XT06
PT
Layout
Schematic
Analog Library

XT06 aopac12 is a low-power, internally compensated CMOS OpAmp with N-MOS input stage and P-MOS source follower output stage.

aopac03_3v3 Operational Amplifier
X-FAB
0.18 μm
XC018
PT
Layout
Schematic
Analog Library

XC018 LP 3.3V aopac03_3v3 is a general purpose internally compensated rail-to-rail input, rail-to-rail output CMOS operational amplifier (OpAmp). The speed, gain bandwidth, and the power consumption of the amplifier are set by means of a bias curren

aopac06_3v3 Operational Amplifier
X-FAB
0.18 μm
XC018
PT
Layout
Schematic
Analog Library

XC018 LP 3.3V aopac06_3v3 is a general purpose internally compensated rail-to-rail input, rail-to-rail output CMOS operational amplifier (OpAmp).

aopac07_3v3 Operational Amplifier
X-FAB
0.18 μm
XC018
PT
Layout
Schematic
Analog Library

XC018 LP 3.3V aopac07_3v3 is a general purpose internally compensated rail-to-rail input, railt-to-rail ouput CMOS operational ampl;ifier (OpAmp).

aopac08_3v3 Operational Amplifier
X-FAB
0.18 μm
XC018
PT
Layout
Schematic
Analog Library

XC018 LP 3.3V aopac08_3v3 is a general internally compensated NMOS input, rail-to-rail output CMOS operational amplifier (OpAmp).

aopac09_3v3 Operational Amplifier
X-FAB
0.18 μm
XC018
PT
Layout
Schematic
Analog Library

XC018 LP 3.3V aopac09_3v3 is a general purpose internally compensated PMOS input, rail-to-rail output CMOS operational amplifier (OpAmp).

aopac03_5v Operational Amplifier
X-FAB
0.18 μm
XC018
PT
Analog Library
Layout
Schematic

XC018 LP 5V aopac03_5v is a general purpose internally compensated CMOS OpAmp with N-MOS input and rail-to-rail output stage.

aopac03_5v Operational Amplifier
X-FAB
0.18 μm
XC018
PT
Analog Library
Layout
Schematic

XC018 LP 5V aopac03_5v is a general purpose internally compensated CMOS OpAmp with P-MOS input stage and rail-to-rail output stage.

aopac03_1v8 Operational Amplifier
X-FAB
0.18 μm
XH018
PT
Analog Library
Layout
Schematic

XH018 LP3MOS 1.8V aopac03_1v8 is a general purpose internally compensated CMOS OpAmp with NMOS native input stage and rail-to-rail output stage. This cell provides typical value of gain bandwidth 1.1MHz and operates with VDD down to 1.2V.

aopac04_1v8 Operational Amplifier
X-FAB
0.18 μm
XH018
PT
Analog Library
Layout
Schematic

XH018 LP3MOS 1.8V aopac04_1v8 is a general purpose internally compensated CMOS OpAmp with NMOS native input stage and rail-to-rail output stage. This cell provides typical value of gain bandwidth 3.7MHz and operates with VDD down to 1.2V.

aopac09_1v8 Operational Amplifier
X-FAB
0.18 μm
XH018
PT
Analog Library
Layout
Schematic

XH018 LP3MOS 1.8V aopac09_1v8 is a general purpose internally compensated CMOS OpAmp with NMOS native input stage and rail-to-rail output stage. This cell provides typical value of gain bandwidth 162kHz.

aopac10_1v8 Operational Amplifier
X-FAB
0.18 μm
XH018
PT
Analog Library
Layout
Schematic

XH018 LP3MOS 1.8V aopac10_1v8 is a general purpose internally compensated CMOS OpAmp with NMOS native input stage and rail-to-rail output stage. This cell provides typical value of gain bandwidth 382kHz.

aopac11_1v8 Operational Amplifier
X-FAB
0.18 μm
XH018
PT
Analog Library
Layout
Schematic

XH018 LP3MOS 1.8V aopac11_1v8 is a general purpose internally compensated CMOS OpAmp with NMOS native input stage and rail-to-rail output stage. This cell provides typical value of gain bandwidth 1.5MHz.

aopac12_1v8 Operational Amplifier
X-FAB
0.18 μm
XH018
PT
Analog Library
Layout
Schematic

XH018 LP3MOS 1.8V aopac12_1v8 is a general purpose internally compensated CMOS OpAmp with NMOS native input stage and rail-to-rail output stage. This cell provides typical value of gain bandwidth 3.8MHz.

aopac01_3v3 Operational Amplifier
X-FAB
0.18 μm
XH018
PT
Analog Library
Layout
Schematic

XH018 LP3MOS 3.3V aopac01_3v3 is a general purpose internally compensated CMOS OpAmp with N-MOS input stage and rail-to-rail output stage. The speed, gain bandwidth, and the power consumption of the amplifier are set by means of a bias current.

aopac02_3v3 Operational Amplifier
X-FAB
0.18 μm
XH018
PT
Analog Library
Layout
Schematic

XH018 LP3MOS 3.3V aopac02_3v3 is a general purpose internally compensated CMOS OpAmp with P-MOS input stage and rail-to-rail output stage. The speed, gain bandwidth, and the power consumption of the amplifier are set by means of a bias current.

aopac03_3v3 Operational Amplifier
X-FAB
0.18 μm
XH018
PT
Analog Library
Layout
Schematic

XH018 LP3MOS 3.3V aopac03_3v3 is a general purpose internally compensated CMOS OpAmp with N-MOS input stage and rail-to-rail output stage. The speed, gain bandwidth, and the power consumption of the amplifier are set by means of a bias current.

aopac04_3v3 Operational Amplifier
X-FAB
0.18 μm
XH018
PT
Analog Library
Layout
Schematic

XH018 LP3MOS 3.3V aopac04_3v3 is a general purpose internally compensated CMOS OpAmp with P-MOS input stage and rail-to-rail output stage. The speed, gain bandwidth, and the power consumption of the amplifier are set by means of a bias current.

D17IP02 Operational Amplifier
Desert Microtechnology
0.35 μm
XH035
PT
GDSII
Schematic

D17IP02 is a rail to rail unity gain CMOS amplifier.  It operates from 2V to 3.6V; has a quiescent current of 214uA; 50.2uV rms noise for a bandwidth of 10 Hz to 100kHz. Require an input current of 2uA; also pad compatible.

OEIC_Fast Optical Receiver Channel
X-FAB
0.60 µm
XB06
PT
Schematic
Layout
Analog Library

XB06: OEIC Building Block Library. OEIC_Fast is a fast DVD receiver channel with two selectable gain settings. Can be integrated with photodiode to form a complete optical receiver channel optimized for 660nm wavelengths.

OEIC_Sensitive Optical Receiver Channel
X-FAB
0.60 µm
XB06
PT
Schematic
Layout
Analog Library

XB06: OEIC Building Block Library. OEIC_Sensitive is a sensitive DVD receiver channel with two selectable gain settings. Can be integrated with photodiode to form a complete optical receiver channel optimized for 660nm wavelengths.

arcoc01 Oscillator
X-FAB
1.00 µm
XC10
PT
Analog Library
Layout
Schematic

XC10: A_CELLS; A_CELLS_M1. arcoc01 is a 200kHz fixed frequency, current balancing RC oscillator with internal R and C.

arcoc02 Oscillator
X-FAB
1.00 µm
XC10
PT
Analog Library
Layout
Schematic

XC10: A_CELLS; A_CELLS_M1. arcoc02 is a 200kHz adjustable current balancing RC oscillator with internal R and C.

arcoc03 Oscillator
X-FAB
1.00 µm
XC10
PT
Analog Library
Layout
Schematic

XC10: A_CELLS; A_CELLS_M1. arcoc03 is a 1MHz fixed frequency, current balancing RC oscillator with internal R and C.

arcoc04 Oscillator
X-FAB
1.00 µm
XC10
PT
Analog Library
Layout
Schematic

XC10: A_CELLS; A_CELLS_M1. arcoc04 is a 1MHz an adjustable current balancing RC oscillator with internal R and C.

arcoc05 Oscillator
X-FAB
1.00 µm
XC10
PT
Analog Library
Layout
Schematic

XC10: A_CELLS; A_CELLS_M1. arcoc05 is a 10kHz RC oscillator with internal R and C. The cell is suitable for applications that do not require high stability.

arcoc06 Oscillator
X-FAB
1.00 µm
XC10
PT
Analog Library
Layout
Schematic

XC10: A_CELLS; A_CELLS_M1. arcoc06 is a 100kHz RC oscillator with internal R and C.

arcoc01 Oscillator
X-FAB
0.60 µm
XC06
PT
Layout
Schematic
Analog Library

XC06: A_CELLS. arcoc01 is a 100kHz RC oscillator with internal R and C.

arcoc02 Oscillator
X-FAB
0.60 µm
XC06
PT
Layout
Schematic
Analog Library

XC06: A_CELLS. arcoc02 is a 200kHz adjustable, current balancing RC oscillator with internal R and C.

 

MP = Mass ProductionPT = Prototyping, Silicon provenID = in DesignVS = Verified by Simulations (Soft-IP)

Displaying results 241 to 270 out of 379

*Disclaimer:
The Intellectual Partner Network is a web database provided by X-FAB in cooperation with selected partners. Both X-FAB and a variety of different IP supplier offer their IP to customers using X-FAB’s foundry process. X-FAB will support customers to get in direct contact with the relevant IP supplier.

X-FAB will take no responsibility nor any liability whatsoever for the information or products offered or provided by the other IP suppliers at the database of the Intellectual Partner Network. X-FAB shall have no liability towards the customers for any use of and/or reliance of the products provided by the other IP suppliers at the database of the Intellectual Partner Network.

X-FAB's own IP is subject to a license agreement. X-FAB IP marked with “*” are part of the Master Kit or Master Kit Plus library. If you can not find the IP you are looking for, please contact the respective sales manager in your region. We continuously extend our libraries and offer a custom cell development service as well.