Everything you need to achieve first-time-right​

Design Support

As a company dedicated to offering its customers first-class service and support, X-FAB boasts the most comprehensive design support in the whole foundry business. Our main objective is to enable a first-time right not only for digital, but also for analog mixed-signal designs. To achieve this, we offer a full-fledged design support for all major electronic design automation (EDA) platforms, supplying correct models, process design kits (PDK) as well as analog and digital libraries.

Our unique hotline service is available 24 hours a day to answer any enquiry you might have, while our online customer portal My X-FAB provides fast and efficient access to online technical information.
For additional support services such as design service, test/assembly or turn-key solutions, we work together with a range of partner companies. Find out more about these partners here: X-CHAIN.

The customer’s view is the real proof of the quality of our work. I am proud, that our technical support is constantly rated above the industry benchmarks. We have received very positive feedback and dedicate our daily work to make it easier for our customers to develop chips successfully.

Lars Bergmann, Head of Design Support of the X-FAB Group

EDA tools and partners

The design of an analog/mixed-signal IC is a very complex task that is heavily dependent on a powerful environment for electronic design automation (EDA). We are working constantly to improve the design flow based on commercially available tools and, when we identify a gap, to develop our own tools to overcome occurring obstacles.

X-FAB maintains intense and close collaboration with all major EDA providers in order to develop design kits together with them. To address specific problems, we complement the design flow with dedicated tools from other vendors. 

Process design kits

We support all major EDA vendors with feature-rich process design kits (PDKs) which contain all data to work with the digital, analog and mixed-signal design-flows in combination with our foundry data.Through our customer portal My X-FAB you have the shortest path from download to design.

We ensure interoperability

Our philosophy for the PDKs is to ensure interoperability by generating the same results irrespective of the chosen tool. This gives designers the free choice to select the best tool suite or to migrate between EDA vendors.  

Pre-defined setups in My X-FAB's SpecXplorer

You will find pre-defined setups for various EDA tools based on the recommended setup by the vendors. After selecting the required modules in SpecXplorer your design kit is automatically configured.

Advanced PDK features

Analog/mixed-signal designs are becoming more complex consisting of sensors, analog and digital circuitry including RAM, ROM and NVM and feature high voltage transistors side by side with low noise amplifiers. Especially the design of complex systems for automotive, industrial and medical applications require effective tools and techniques to achieve robust designs. We support you with advanced features included in our PDK to meet design goals, to achieve good yield and product reliability.

Expert support

An important element of our design support is the direct expert to expert interaction with of you, our customer. 

  • Technical hotline

    Your first contact is our Technical Hotline, where our qualified team provides you with an answer whether you have a question concerning design kits, libraries, IPs, process specifications, or safe operating areas. Drawing from their own expertise as well as working closely with Field Application Engineers and our in-house experts, they will answer your inquiry 24 hours a day, 5 days a week.

  • ESD support

    Developing integrated circuits which can withstand ESD (Electrostatic discharge) is a design challenge. Many of the devices we manufacture are deployed in harsh environments fulfilling safety critical sometimes life sustaining functions. To help you mastering this challenge we offer special ESD consultation and ESD Design Review as part of our design service. As ESD has to considered in all stages of a design, you can contact our ESD experts during the full development process.

  • Reference kits

    Besides the comprehensive collection of our technical documentation and application notes on our customer portal myXFAB, we provide reference kits to enable a fast and easy adoption of state-of-the-art design flows. Our X-FAB Reference kits address focus areas like analog/mixed-signal, low power, multi voltage, or RF using real life design examples. The kits demonstrate advanced features of our PDKs and IPs and are available for all major EDA vendors (Cadence, Synopsys, Siemens EDA) including special purpose tools from Muneda and Silicon Frontline.

X-FAB IP

Reusing proven circuit IP is essential for first-time-right designs and fast time to market product development. We offer a broad range of proven IP, used and validated in 100s of customer designs. All our IP is developed In-house by our design teams for best compatibility and support state-of-the-art implementation flows like multi-voltage domains and partial power-shutoff.

  • We provide dedicated I/O cell libraries for pad-limited or core-limited designs respectively, where all I/O structures have been characterized for ESD protection and latch-up resistance. The libraries contain distinct and complete input, output, bidirectional and general-purpose analog I/O cells. Special high voltage I/O libraries support voltages up to 61V and ESD level 2kV-8kV HBM.

    Standard Digital I/O Libraries

    • Bulk CMOS and SOI based I/O cell libraries are available for pad-limited or core-limited designs
    • The I/O structure has been characterized for ESD protection and latch-up resistance
    • Cell library contains distinct and complete inputs, outputs, bidirectionals, general purpose analog I/O and supply cells

    Special I/O Libraries

    • Latch-up robust pad cells for HV supply and HV I/O protection
    • SCR based clamp circuits with high ESD robustness and low or high holding voltage for HV I/O protection
    • HV I/O with reverse voltage protection

    Comprehensive technology specific ESD – I/O documentation

    • TLP IV Characteristics (Standard TLP, vf-TLP, LD-TLP, HMM)
    • ESD LU guidelines
    • IO and HV library documentation
  • For a quick start of your design we offer a broad spectrum of analog IP that not only allows you to focus on the core functionality of your product. To save a lot of design effort on your side and also reduce the risk of redesigns caused by non-functioning standard circuits our analog libraries consist of the full design database, e.g. for band gaps, bias cells, or voltage regulators.

    Visit IP Portal

    IP Portal has both X-FAB and a variety of different IP suppliers that offer their IP to customers using X-FAB’s foundry processes. Start explore with  IP Portal to find IPs that suited your project!

     

    1.0 µm

    0.8 µm

    0.6 µm

    350 nm

    180 nm

    130 nm

    Bandgaps

     

    Bias Cell

     

     

    OpAmps

     

     

    Comparators

     

     

    Oscillators

     

    Power-ON-Reset

     

     

    ADC/DAC

     

    PLL

        

     

    Voltage Regulators

      

     

    HV Cells

     

      
  • Our digital libraries are optimized to meet various challenging requirements of your mixed-signal designs. Dedicated libraries for low power, low leakage and power shut-off can be combined with each another to achieve best performance for your specific product needs. 

     

    1.0 µm

    0.8 µm

    0.6 µm

    350 nm

    180 nm

    130 nm

    Standard speed

    Standard speed, Low Noise

     

     

     

     

    Standard speed, Junction Isolated

     

     

     

     

     

    Standard speed, Low Leakage

     

     

     

     

     

    Standard speed, Low Leakage, Junction Isolated

     

     

     

     

     

    Low Power

     

     

     

    Low Power, Low Noise

     

     

     

    Low Power, Junction Isolated

     

     

    Low Power, Low Leakage

       

     

    Low Power, Low Leakage, Junction Isolated

        

     

    Multi-Supply Voltage, Power Shut-Off

        

  • To give you flexibility to the greatest possible extent when adding memory to your design, we provide multiple types of RAM and ROM. From our customer portal myXFAB you can run frontend compilers for various single or dual port RAM and ROM each optimized for high speed, low power or low area. For all embedded memories BIST blocks are available optionally. For RAM there is the option to add ECC IP. 

     

    0.6 µm

    350 nm

    180 nm

    Single Port SRAM

    Single Port SRAM, Junction Isolated

      

    Single Port SRAM, Low Power

      

    Single Port SRAM, Low Power, Junction Isolated

      

    Single Port SRAM, Very Low Power, Junction Isolated

      

    Dual Port SRAM

     

    Dual Port SRAM, Low Power

      

    Dual Port SRAM, Low Power, Junction Isolated

      

    ROM

    ROM, Junction Isolated

      

    ROM, Low Power  

    ROM, Low Power, Junction Isolated  

  • Whatever your embedded NVM need is, a solution is already available in the X-FAB 180 nm and 130 nm-RF portfolios: From trimming to storage you can choose between latches, OTP’s, EEPROM, NVRAM, and FLASH. All NVM IPs are designed for Automotive standard, at the highest level of reliability and resiliency when operating in harsh conditions.

    READ MORE

  • Related news

    X-FAB Silicon Foundries SE, the leading analog/mixed-signal and specialty foundry, today announced a collaboration with the prominent computational software vendor, Cadence Design…

    Read more
    Layout of super small scalable OTP memory

    Tessenderlo, Belgium and Hsinchu, Taiwan 

    X-FAB Silicon Foundries, the leading analog/mixed-signal and specialty foundry, together with Attopsemi, the innovative one-time…

    Read more


    X-FAB Silicon Foundries SE, the leading analog/mixed-signal and specialty foundry, has expanded the scope of its SubstrateXtractor tool, via which unwanted substrate coupling…

    Read more

    Contact

    For more information, please contact us:

    By submitting the form you agree to our privacy policy.

    I agree to my data being stored and processed by X-FAB.