IP Portal

Sel. IP Name Category Provider Geometry Process Name Status Deliverable Description
arcoc03 Oscillator
X-FAB
0.60 µm
XC06
PT
Layout
Schematic
Analog Library

XC06: A_CELLS. arcoc03 is a compact, low-power 10kHz RC oscillator with internal R and C. The cell is suitable for applications where accuracy and stabilty are not crucial.

arcoc04 Oscillator
X-FAB
0.60 µm
XC06
PT
Layout
Schematic
Analog Library

XC06: A_CELLS. arcoc04 is a 200kHz fixed frequency, current balancing RC oscillator with internal R and C.

arcoc05 Oscillator
X-FAB
0.60 µm
XC06
PT
Layout
Schematic
Analog Library

XC06: A_CELLS. arcoc05 is a 1MHz fixed frequency, current balancing RC oscillator with internal R and C.

arcoc06 Oscillator
X-FAB
0.60 µm
XC06
PT
Layout
Schematic
Analog Library

XC06: A_CELLS. arcoc06 is a 1MHz adjustable, current balancing RC oscillator with internal R and C.

axtoc01 Crystal Oscillators
X-FAB
0.60 µm
XC06
PT
Layout
Schematic
Analog Library

XC06: A_CELLS. axtoc01 is a 32 kHz crystal oscillator for 3.5 to 5.5V supply voltage range. An external quartz crystal has to be connected to the XTLIN and XTALOUT pins. No other external components are required.

axtoc02 Crystal Oscillators
X-FAB
0.60 µm
XC06
PT
Layout
Schematic
Analog Library

XC06: A_CELLS. axtoc02 is a 1...4 MHz crystal oscillator for supply voltage range from 3.5 to 5.5V An external quartz crystal has to be connected to the XTLIN and XTALOUT pins. No other external components are required.

axtoc03 Crystal Oscillators
X-FAB
0.60 µm
XC06
PT
Layout
Schematic
Analog Library

XC06: A_CELLS. axtoc03 is a 2...6 MHz crystal oscillator for supply voltage range from 3.5 to 5.5V. An external quartz crystal has to be connected to the XTALIN and XTALOUT pins. No other external components are required.

axtoc04 Crystal Oscillators
X-FAB
0.60 µm
XC06
PT
Layout
Schematic
Analog Library

XC06: A_CELLS.

aporc01 Power on Reset
X-FAB
0.60 µm
XC06
PT
Layout
Schematic
Analog Library

XC06: A_CELLS. aporc01 is a dynamic Power-on-Reset circuit. During power-on, POR output is kept high as long as the supply voltage is bellow the POR threshold voltage. When the threshold voltage is reached, the POR signal turns low. A delay of few microse

aporc02 Power on Reset
X-FAB
0.60 µm
XC06
PT
Layout
Schematic
Analog Library

XC06: A_CELLS. aporc02 is a Power-on-Reset circuit with hysteresis. Reset signals are generated on both the rising and falling edge of the supply voltage. During power-on, POR output is kept high as long as the supply voltage is bellow the high threshold

aporc03 Power on Reset
X-FAB
0.60 µm
XC06
PT
Layout
Schematic
Analog Library

XC06: A_CELLS. aporc03 is a Power-on-Reset circuit. Reset signals are generated on both the rising and falling edge of the supply voltage. During power-on, POR output is kept low as long as the supply voltage is bellow the threshold voltage. When the high

achpc01 Charge Pumps
X-FAB
0.60 µm
XC06
PT
Layout
Schematic
Analog Library

XC06: A_CELLS. achpc01 is a doubling charge pump 3.3V -> 5.7V. All capacitors are internal.

12b-50uW-12kS/s-ADC ADC
Fraunhofer IIS/EAS
0.18 μm
XC018
XH018
PT
GDSII
Schematic

XH018 LP-Cyclic-ADC for Vsupply = 2.4V..3.6V and T = -40..125°C. Available for multiple specifications: (10..12bit INL, 12..100kS/sec, >=20uW, >=0.1mm2)

aopac01 Operational Amplifier
X-FAB
0.35 μm
XH035
PT
Layout
Schematic
Analog Library

XH035: A_CELLS. For MOS module only. aopac01 is a general purpose internally compensated CMOS OpAmp with N-MOS input stage and rail-to-tail output stage.

aopac02 Operational Amplifier
X-FAB
0.35 μm
XH035
PT
Layout
Schematic
Analog Library

XH035: A_CELLS. For MOS module only. aopac02 is a general purpose internally compensated CMOS OpAmp with P-MOS input stage and rail-to-rail output stage.

aopac05 Operational Amplifier
X-FAB
0.35 μm
XH035
PT
Layout
Schematic
Analog Library

XH035: A_CELLS. For MOS module only. aopac05 is a low-power internally compensated with P-MOS input and rail-to-rail output.

aopac03 Operational Amplifier
X-FAB
0.35 μm
XH035
PT
Layout
Schematic
Analog Library

XH035: A_CELLS. For MOS module only. aopac03 is a general purpose internally compensated rai-to-rail input, rail-to-rail output CMOS OpAmp. It features low input offset voltage and high output driving capabilities.

aopac04 Operational Amplifier
X-FAB
0.35 μm
XH035
PT
Layout
Schematic
Analog Library

XH035: A_CELLS. For MOS module only. aopac04 is a general purpose internally compensated rail-to-rail input, rail-to-rail output CMOS OpAmp. Features precision quiescent current control & high output driving capabilities.

aopac06 Operational Amplifier
X-FAB
0.35 μm
XH035
PT
Layout
Schematic
Analog Library

XH035: A_CELLS. For MOS module only. aopac06 is a fast internally compensated with N-MOS input and rail-to-rail output.

aopac08 Operational Amplifier
X-FAB
0.35 μm
XH035
PT
Layout
Schematic
Analog Library

XH035: A_CELLS. For MOS module only. aopac08 is a general purpose internally compensated operational amplifier with N-MOS input and emitter-follower output.

aopac12 Operational Amplifier
X-FAB
0.35 μm
XH035
PT
Layout
Schematic
Analog Library

XH035: A_CELLS. For MOS module only. aopac12 is an internally compensated CMOS differential input - differential output (DIDO) operational amplifier with P-MOS input stage and rail-to-rail output stages.

acmpc01 Comparators
X-FAB
0.35 μm
XH035
PT
Layout
Schematic
Analog Library

XH035: A_CELLS. For MOS module only. acmpc01 is a low-power CMOS comparator with hysteresis. The input stage is P-MOS differential pair.

acmpc02 Comparators
X-FAB
0.35 μm
XH035
PT
Layout
Schematic
Analog Library

XH035: A_CELLS. For MOS module only. acmpc02 is a low-power CMOS comparator with hysteresis. The input stage is N-MOS differential pair.

acmpc03 Comparators
X-FAB
0.35 μm
XH035
PT
Layout
Schematic
Analog Library

XH035: A_CELLS. For MOS module only. acmpc03 is a rail-to-rail CMOS comparator.

acmpc04 Comparators
X-FAB
0.35 μm
XH035
PT
Layout
Schematic
Analog Library

XH035: A_CELLS. For MOS module only. acmpc04 is a current-programmable rail-to-rail CMOS voltage comparator. The speed and the power consumption of the cell are programmed by means of bias current.

abgpc01 Bandgaps
X-FAB
0.35 μm
XH035
PT
Layout
Schematic
Analog Library

XH035: A_CELLS. For MOS module only. abgpc01 is a general purpose bandgap reference with N-well resistors.

abgpc02 Bandgaps
X-FAB
0.35 μm
XH035
PT
Layout
Schematic
Analog Library

XH035: A_CELLS. For MOS module only. abgpc02 is a general purpose bandgap reference with Poly2 resistors.

abgpc04 Bandgaps
X-FAB
0.35 μm
XH035
PT
Layout
Schematic
Analog Library

XH035: A_CELLS. For MOS module only. abgpc04 is a general purpose bandgap reference with Poly2 resistors.

abgpc07 Bandgaps
X-FAB
0.35 μm
XH035
PT
Layout
Schematic
Analog Library

XH035: A_CELLS. For MOS module only. abgpc07 is a low-supply voltage bandgap reference with N-well resistors. The cell features low supply current and low noise.

abiac01 Bias
X-FAB
0.35 μm
XH035
PT
Layout
Schematic
Analog Library

XH035: A_CELLS. For MOS module only. abiac01 is a general purpose bias cell. The circuit forces a current of 2µA (approx.) to flow through PMOS with W/L ratio of 6µm/6µm and NMOS with W/L ration of 6µm/6µm.

 

MP = Mass ProductionPT = Prototyping, Silicon provenID = in DesignVS = Verified by Simulations (Soft-IP)

Displaying results 121 to 150 out of 371

*Disclaimer:
The Intellectual Partner Network is a web database provided by X-FAB in cooperation with selected partners. Both X-FAB and a variety of different IP supplier offer their IP to customers using X-FAB’s foundry process. X-FAB will support customers to get in direct contact with the relevant IP supplier.

X-FAB will take no responsibility nor any liability whatsoever for the information or products offered or provided by the other IP suppliers at the database of the Intellectual Partner Network. X-FAB shall have no liability towards the customers for any use of and/or reliance of the products provided by the other IP suppliers at the database of the Intellectual Partner Network.

X-FAB's own IP is subject to a license agreement. X-FAB IP marked with “*” are part of the Master Kit or Master Kit Plus library. If you can not find the IP you are looking for, please contact the respective sales manager in your region. We continuously extend our libraries and offer a custom cell development service as well.