IP Portal

Sel. IP Name Category Provider Geometry Process Name Status Deliverable Description
abiac06 Bias
X-FAB
0.60 µm
XT06
PT
Layout
Schematic
Analog Library

XT06 abiac06 is a general purpose VTH - based bias cell, a cheaper substitute for abiac03. The circuit forces a current of 10µA (approx.) to flow through P- or N- MOS with W/L ration of 10µm/6µm.

aadcc01 ADC
X-FAB
0.60 µm
XT06
PT
Layout
Schematic
Analog Library

XT06 aadcc01 is a 10-bit successive approximation Analog-to-Digital converter (ADC). The ADC operates with a single 5V power supply and an external voltage reference.

aadcc02 ADC
X-FAB
0.60 µm
XT06
PT
Layout
Schematic
Analog Library

XT06

aadcc03 ADC
X-FAB
0.60 µm
XT06
PT
Layout
Schematic
Analog Library

XT06

adacc01 DAC
X-FAB
0.60 µm
XT06
PT
Layout
Schematic
Analog Library

XT06 adacc01 is a 10-bit voltage-scaling (potentiometric) digital-to-analog converter (DAC). The adacc01 DAC operates with a single 5V power supply and external reference voltage.

adacc02 DAC
X-FAB
0.60 µm
XT06
PT
Layout
Schematic
Analog Library

XT06 adacc02 is an 8-bit R-2R digital-to-analog converter (DAC). The adacc02 DAC operates with a single 5V power supply and external reference voltage.

adacc03 DAC
X-FAB
0.60 µm
XT06
PT
Layout
Schematic
Analog Library

XT06

arcoc01 Oscillator
X-FAB
0.60 µm
XT06
PT
Layout
Schematic
Analog Library

XT06 arcoc01 is a 100kHz oscillator with internal R and C.

arcoc02 Oscillator
X-FAB
0.60 µm
XT06
PT
Layout
Schematic
Analog Library

XT06 arcoc02 is a 200kHz adjustable, current balancing RC oscillator with internal R and C.

arcoc03 Oscillator
X-FAB
0.60 µm
XT06
PT
Layout
Schematic
Analog Library

XT06 arcoc03 is a compact, low-power 10kHz oscillator with internal R and C. The cell is suitable for applications where accuracy and stability are not crucial.

arcoc04 Oscillator
X-FAB
0.60 µm
XT06
PT
Layout
Schematic
Analog Library

XT06 arcoc04 is a 200kHz fixed frequency, current balancing RC oscillator with internall R and C.

arcoc05 Oscillator
X-FAB
0.60 µm
XT06
PT
Layout
Schematic
Analog Library

XT06 arcoc05 is a 1MHz fixed frequency, current balancing RC oscillator with internal R and C.

arcoc06 Oscillator
X-FAB
0.60 µm
XT06
PT
Layout
Schematic
Analog Library

XT06 arcoc06 is a 1MHz adjustable, current balancing RC oscillator with internal R and C.

arcoc07 Oscillator
X-FAB
0.60 µm
XT06
PT
Layout
Schematic
Analog Library

XT06 arcoc07 is a 10kHz low-power oscillator with internal R and C.

arcoc08 Oscillator
X-FAB
0.60 µm
XT06
PT
Layout
Schematic
Analog Library

XT06 arcoc08 is a 10MHz low-power oscillator with internal R and C.

arcoc09 Oscillator
X-FAB
0.60 µm
XT06
PT
Layout
Schematic
Analog Library

XT06 arcoc09 is a 20MHz low-power oscillator with internal R and C.

axtoc01 Crystal Oscillators
X-FAB
0.60 µm
XT06
PT
Layout
Schematic
Analog Library

XT06 axtoc01 is a 32kHz crystal oscillator for 3.5 to 5.5V supply voltage range. An external quartz has to be connected to XTALIN and XTALOUT pins.

axtoc02 Crystal Oscillators
X-FAB
0.60 µm
XT06
PT
Layout
Schematic
Analog Library

XT06 axtoc02 is a 1...4MHz crystal oscillator for supply voltage range from 3.5 to 5.5V. An external quartz crystal as to be connected to XTALIN and XTALOUT pins.

axtoc03 Crystal Oscillators
X-FAB
0.60 µm
XT06
PT
Layout
Schematic
Analog Library

XT06 axtoc03 is a 1...6MHz crystal oscillator for supply voltage range from 3.3 to 5.5V. An external quartz crstal has to be connected to XTALIN and XTALOUT pins.

aporc01 Power on Reset
X-FAB
0.60 µm
XT06
PT
Layout
Schematic
Analog Library

XT06 aporc01 is a dynamic Power-on-Reset circuit. During power-on, POR output is kept high as long as the supply voltage is below the POR threshold voltage. When the threshold voltage is reached, the POR signal turns low.

aporc02 Power on Reset
X-FAB
0.60 µm
XT06
PT
Layout
Schematic
Analog Library

XT06 aporc02 is a Power-on-Reset circuit with hysteresis. Reset signal are generated on both the rising and failing edge of the supply voltage. During power-on, POR outputs is kept high as long as the supply voltage is below the threshold voltage.

aporc03 Power on Reset
X-FAB
0.60 µm
XT06
Layout
Schematic
Analog Library

XT06 aporc03 is a Power-on-Rest circuit. Reset signals are generated on both the rising and falling edge of the supply voltage. During power-on, POR output is kept high as long as the supply voltage is below the high threshold.

achpc01 Charge Pumps
X-FAB
0.60 µm
XT06
PT
Layout
Schematic
Analog Library

XT06 achpc01 is a doubling charge pump 3.3V => 5.6V.

aopac13 Operational Amplifier
X-FAB
0.60 µm
XC06
PT
Layout
Schematic
Analog Library

XC06: A_CELLS_HV. aopac13 is a high-voltage (VDD up to 10V), low-power, internally-compensated CMOS OpAmp with PMOS input stage.

aopac14 Operational Amplifier
X-FAB
0.60 µm
XC06
PT
Schematic
Layout
Analog Library

XC06: A_CELLS_HV. aopac14 is a high-voltage (VDD up to 10V), low-power, internally-compensated CMOS OpAmp with NMOS input stage.

aopac15 Operational Amplifier
X-FAB
0.60 µm
XC06
PT
Schematic
Layout
Analog Library

XC06: A_CELLS_HV. aopac15 is a high-voltage, internally-compensated CMOS OpAmp with NMOS input stage and bipolar emitter-follower output. The incorporated level shifters allow the EN and ENB inputs to be controlled by 5V circuitry.

abiac07 Bias
X-FAB
0.60 µm
XC06
PT
Schematic
Layout
Analog Library

XC06: A_CELLS_HV. abiac07 is a high-voltage bias cell. The circuit forces a current of 2µA (approx.) to flow through pghv PMOS with W/L ratio of 10µm/10µm and nmv NMOS with W/L ratio of 10µm/12µm.

abiac08 Bias
X-FAB
0.60 µm
XC06
PT
Schematic
Layout
Analog Library

XC06: A_CELLS_HV. abiac08 is a high-voltage bias cell. THe circuit forces a current of 2µA (approx.) to flow through pgmv PMOS with W/L ratio of 10µm/10µm and nhv NMOS with W/L ratio od 10µm/12µm. The cell features low-cost process option and is a co

adrvc01 Driver
X-FAB
0.60 µm
XC06
PT
Schematic
Layout
Analog Library

XC06: A_CELLS_HV. adrvc01 is a driver circuit for external loads (relays, LEDs, etc). The circuit features NMOS open-drain output (high-side switch). High input voltage makes the output go low (connected to ground). The rising slope of the output signal c

adrvc02 Driver
X-FAB
0.60 µm
XC06
PT
Schematic
Layout
Analog Library

XC06: A_CELLS_HV. adrvc02 is a driver circuit for external loads (relays, LEDs, etc). The circuit features NMOS open-drain output (low-side switch). High input voltage makes the output go low (connected to ground).

 

MP = Mass ProductionPT = Prototyping, Silicon provenID = in DesignVS = Verified by Simulations (Soft-IP)

Displaying results 241 to 270 out of 370

*Disclaimer:
The Intellectual Partner Network is a web database provided by X-FAB in cooperation with selected partners. Both X-FAB and a variety of different IP supplier offer their IP to customers using X-FAB’s foundry process. X-FAB will support customers to get in direct contact with the relevant IP supplier.

X-FAB will take no responsibility nor any liability whatsoever for the information or products offered or provided by the other IP suppliers at the database of the Intellectual Partner Network. X-FAB shall have no liability towards the customers for any use of and/or reliance of the products provided by the other IP suppliers at the database of the Intellectual Partner Network.

X-FAB's own IP is subject to a license agreement. X-FAB IP marked with “*” are part of the Master Kit or Master Kit Plus library. If you can not find the IP you are looking for, please contact the respective sales manager in your region. We continuously extend our libraries and offer a custom cell development service as well.