IP Portal

Sel. IP Name Category Provider Geometry Process Name Status Deliverable Description
arcoc11_1v8 Oscillator
X-FAB
0.18 μm
XH018
PT
Analog Library
Layout
Schematic

XH018 LP3MOS 1.8V arcoc11_1v8 is a robust 200kHz RC oscillator with internal R and C. Frequency independent on load capacity.

arcoc12_1v8 Oscillator
X-FAB
0.18 μm
XH018
PT
Analog Library
Layout
Schematic

XH018 LP3MOS 1.8V arcoc12_1v8 is a robust 10kHz RC oscillator with internal R and C. Frequency independent on load capacity.

aregc01 Voltage Regulator
X-FAB
1.00 µm
XC10
PT
Analog Library
Layout
Schematic

XC10: A_CELLS; A_CELLS_M1. aregc01 is a 5V / 3.3V positive voltage linear regulator for up to 10 mA load current.

aregc01 Voltage Regulator
X-FAB
0.35 μm
XH035
PT
Layout
Schematic
Analog Library

XH035: A_CELLS_HV. For MOS module only. aregc01 is a 5V/3.3V linear voltage regulator for up to 20mA load current. The regulator is powered viz its high voltage input.

aregc01_3v3 Voltage Regulator
X-FAB
0.18 μm
XC018
PT
Layout
Schematic
Analog Library

XC01801_3v3 is a 3.3V/1.8V linear voltage regulator for up to 20mA load current and internal bandgap reference. The regulator is implimented as a macro cell that fits into the core-limited I/O ring.

aregc01_3v3 Voltage Regulator
X-FAB
0.18 μm
XH018
PT
Analog Library
Layout
Schematic

XH018 LP3MOS 3.3V aregc01_3v3 is a 3.3v/1.8V linear voltage regulator for up to 20mA load current and internal bandgap reference. The regulator is implemented as macro cell that fits into the core-limited I/O ring.

aregc02 Voltage Regulator
X-FAB
1.00 µm
XC10
PT
Analog Library
Layout
Schematic

XC10: A_CELLS; A_CELLS_M1. aregc02 is a 2.4V / 3.3V positive voltage switching regulator for on-chip loads and up to 10 mA load current.

aregc02 Voltage Regulator
X-FAB
0.35 μm
XH035
PT
Schematic
Layout
Analog Library

XH035: A_CELLS_HV. For MOS module only. aregc02 is a 12V/3.3V linear voltage regulator for up to 20mA load current. The regulator is powered via its high-voltage input.

atmpc01 X-FAB
1.00 µm
XC10
PT
Analog Library
Layout
Schematic

XC10: A_CELLS; A_CELLS_M1. atmpc01 is a high-temperature detector. An OVERT output signal (active low) is generated when the chip temperature rises above 140 °C (approx.).

atmpc01_3v3 Other
X-FAB
0.18 μm
XC018
PT
Layout
Schematic
Analog Library

XC018 LP 3.3V atmpc01_3v3 is an over-temperature detector. When the chip temperature rises over the high threshold temperature (~130°C) the output signal turns high.

atmpc01_3v3 Other
X-FAB
0.18 μm
XH018
PT
Analog Library
Layout
Schematic

XH018 LP3MOS 3.3V atmpc01_3v3 is a high-temperature alarm cirsuit. When the chip temperature rises over the high threshold temperature (133°C approx) an OVT (active high) signal is activated.

atmpc01_5v Other
X-FAB
0.18 μm
XC018
PT
Analog Library
Layout
Schematic

XC018 LP 5V atmpc01_5v is an over-temperature detector. When the chip temperature rises over the high threshold temperature (~125°C) the output signal turns high.

atmpc02 X-FAB
1.00 µm
XC10
PT
Analog Library
Layout
Schematic

XC10: A_CELLS; A_CELLS_M1. atmpc02 is a high-temperature detector. An OVERT output signal (active low) is generated when the chip temperature rises above 160 °C (approx.).

AV2102 600mA Buck Voltage Regulator
Aivaka
0.60 µm
XC06
PT
GDSII

DC/DC regulator.

AV2110 600mA Buck Voltage Regulator
Aivaka
0.60 µm
XC06
PT
GDSII

DC/DC Buck Regulator with 0% to 100% duty cycle.

avcoc01_3v3 VCO
X-FAB
0.18 μm
XC018
PT
Layout
Schematic
Analog Library

XC018 LP 3.3V avcoc01_3v3 is a voltage controlled oscillator (VCO).

axtoc01 Crystal Oscillators
X-FAB
0.60 µm
XC06
PT
Layout
Schematic
Analog Library

XC06: A_CELLS. axtoc01 is a 32 kHz crystal oscillator for 3.5 to 5.5V supply voltage range. An external quartz crystal has to be connected to the XTLIN and XTALOUT pins. No other external components are required.

axtoc01 Crystal Oscillators
X-FAB
0.35 μm
XH035
PT
Layout
Schematic
Analog Library

XH035: A_CELLS. For MOS module only. axtoc01 is a robust 2 - 8 MHz crystal oscillator for supply voltage range from 2.4 to 3.6V. An external quartz crystal is required.

axtoc01 Crystal Oscillators
X-FAB
0.60 µm
XT06
PT
Layout
Schematic
Analog Library

XT06 axtoc01 is a 32kHz crystal oscillator for 3.5 to 5.5V supply voltage range. An external quartz has to be connected to XTALIN and XTALOUT pins.

axtoc01_3v3 Crystal Oscillators
X-FAB
0.18 μm
XC018
PT
Layout
Schematic
Analog Library

XC018 LP 3.3V axtoc01_3v3 is a robust 32.768 kHz crystal oscillator for supply voltage range from 2.4 to 3.6V.

axtoc01_5v Crystal Oscillators
X-FAB
0.18 μm
XC018
PT
Analog Library
Layout
Schematic

XC018 LP 5V axtoc01_5v is a robust 32.7689 kHz crystal oscillator for supply voltage range from 3.5V to 5.5V.

axtoc02 Crystal Oscillators
X-FAB
1.00 µm
XC10
PT
Analog Library
Layout
Schematic

XC10: A_CELLS; A_CELLS_M1. axtoc02 is a 1…2MHz crystal oscillator for voltage range from 3.5V to 5.5V.

axtoc02 Crystal Oscillators
X-FAB
0.60 µm
XC06
PT
Layout
Schematic
Analog Library

XC06: A_CELLS. axtoc02 is a 1...4 MHz crystal oscillator for supply voltage range from 3.5 to 5.5V An external quartz crystal has to be connected to the XTLIN and XTALOUT pins. No other external components are required.

axtoc02 Crystal Oscillators
X-FAB
0.35 μm
XH035
PT
Layout
Schematic
Analog Library

XH035: A_CELLS. For MOS module only. axtoc02 is a robust 32,768kHz crystal oscillatior for supply voltage range from 2.4 to 2.6V. An external quartz crystal is required.

axtoc02 Crystal Oscillators
X-FAB
0.60 µm
XT06
PT
Layout
Schematic
Analog Library

XT06 axtoc02 is a 1...4MHz crystal oscillator for supply voltage range from 3.5 to 5.5V. An external quartz crystal as to be connected to XTALIN and XTALOUT pins.

axtoc02_3v3 Crystal Oscillators
X-FAB
0.18 μm
XC018
PT
Schematic
Layout
Analog Library

XC018 LP 3.3V axtoc02_3v3 is a robust 1-4 MHz crystal oscillator for supply voltage range from 2.4 to 3.6V.

axtoc02_5v Crystal Oscillators
X-FAB
0.18 μm
XC018
PT
Analog Library
Layout
Schematic

XC018 LP 5V axtoc02-5v is a robust 1-4 MHz crystal oscillator for supply voltage range from 3.5V to 5.5V.

axtoc03 Crystal Oscillators
X-FAB
1.00 µm
XC10
PT
Analog Library
Layout
Schematic

XC10: A_CELLS; A_CELLS_M1. axtoc03 is a 2…5MHz crystal oscillator for voltage range from 3.5V to 5.5V.

axtoc03 Crystal Oscillators
X-FAB
0.60 µm
XC06
PT
Layout
Schematic
Analog Library

XC06: A_CELLS. axtoc03 is a 2...6 MHz crystal oscillator for supply voltage range from 3.5 to 5.5V. An external quartz crystal has to be connected to the XTALIN and XTALOUT pins. No other external components are required.

axtoc03 Crystal Oscillators
X-FAB
0.60 µm
XT06
PT
Layout
Schematic
Analog Library

XT06 axtoc03 is a 1...6MHz crystal oscillator for supply voltage range from 3.3 to 5.5V. An external quartz crstal has to be connected to XTALIN and XTALOUT pins.

 

MP = Mass ProductionPT = Prototyping, Silicon provenID = in DesignVS = Verified by Simulations (Soft-IP)

Displaying results 271 to 300 out of 371

*Disclaimer:
The Intellectual Partner Network is a web database provided by X-FAB in cooperation with selected partners. Both X-FAB and a variety of different IP supplier offer their IP to customers using X-FAB’s foundry process. X-FAB will support customers to get in direct contact with the relevant IP supplier.

X-FAB will take no responsibility nor any liability whatsoever for the information or products offered or provided by the other IP suppliers at the database of the Intellectual Partner Network. X-FAB shall have no liability towards the customers for any use of and/or reliance of the products provided by the other IP suppliers at the database of the Intellectual Partner Network.

X-FAB's own IP is subject to a license agreement. X-FAB IP marked with “*” are part of the Master Kit or Master Kit Plus library. If you can not find the IP you are looking for, please contact the respective sales manager in your region. We continuously extend our libraries and offer a custom cell development service as well.