IP Portal

Sel. IP Name Category Provider Geometry Process Name Status Deliverable Description
arcoc05 Oscillator
X-FAB
0.60 µm
XT06
PT
Layout
Schematic
Analog Library

XT06 arcoc05 is a 1MHz fixed frequency, current balancing RC oscillator with internal R and C.

arcoc06 Oscillator
X-FAB
0.60 µm
XT06
PT
Layout
Schematic
Analog Library

XT06 arcoc06 is a 1MHz adjustable, current balancing RC oscillator with internal R and C.

arcoc07 Oscillator
X-FAB
0.60 µm
XT06
PT
Layout
Schematic
Analog Library

XT06 arcoc07 is a 10kHz low-power oscillator with internal R and C.

arcoc08 Oscillator
X-FAB
0.60 µm
XT06
PT
Layout
Schematic
Analog Library

XT06 arcoc08 is a 10MHz low-power oscillator with internal R and C.

arcoc09 Oscillator
X-FAB
0.60 µm
XT06
PT
Layout
Schematic
Analog Library

XT06 arcoc09 is a 20MHz low-power oscillator with internal R and C.

axtoc01 Crystal Oscillators
X-FAB
0.60 µm
XT06
PT
Layout
Schematic
Analog Library

XT06 axtoc01 is a 32kHz crystal oscillator for 3.5 to 5.5V supply voltage range. An external quartz has to be connected to XTALIN and XTALOUT pins.

axtoc02 Crystal Oscillators
X-FAB
0.60 µm
XT06
PT
Layout
Schematic
Analog Library

XT06 axtoc02 is a 1...4MHz crystal oscillator for supply voltage range from 3.5 to 5.5V. An external quartz crystal as to be connected to XTALIN and XTALOUT pins.

axtoc03 Crystal Oscillators
X-FAB
0.60 µm
XT06
PT
Layout
Schematic
Analog Library

XT06 axtoc03 is a 1...6MHz crystal oscillator for supply voltage range from 3.3 to 5.5V. An external quartz crstal has to be connected to XTALIN and XTALOUT pins.

aporc01 Power on Reset
X-FAB
0.60 µm
XT06
PT
Layout
Schematic
Analog Library

XT06 aporc01 is a dynamic Power-on-Reset circuit. During power-on, POR output is kept high as long as the supply voltage is below the POR threshold voltage. When the threshold voltage is reached, the POR signal turns low.

aporc02 Power on Reset
X-FAB
0.60 µm
XT06
PT
Layout
Schematic
Analog Library

XT06 aporc02 is a Power-on-Reset circuit with hysteresis. Reset signal are generated on both the rising and failing edge of the supply voltage. During power-on, POR outputs is kept high as long as the supply voltage is below the threshold voltage.

aporc03 Power on Reset
X-FAB
0.60 µm
XT06
Layout
Schematic
Analog Library

XT06 aporc03 is a Power-on-Rest circuit. Reset signals are generated on both the rising and falling edge of the supply voltage. During power-on, POR output is kept high as long as the supply voltage is below the high threshold.

achpc01 Charge Pumps
X-FAB
0.60 µm
XT06
PT
Layout
Schematic
Analog Library

XT06 achpc01 is a doubling charge pump 3.3V => 5.6V.

AV2102 600mA Buck Voltage Regulator
Aivaka
0.60 µm
XC06
PT
GDSII

DC/DC regulator.

AV2110 600mA Buck Voltage Regulator
Aivaka
0.60 µm
XC06
PT
GDSII

DC/DC Buck Regulator with 0% to 100% duty cycle.

DAC-7bit-0.6u DAC
Ridgetop Group
0.60 µm
XC06
PT
GDSII

Low Power, Wide Supply Range, CMOS, output to pos rail

DC-DC Converter DC/DC Converters
Ridgetop Group
0.60 µm
XC06
ID
GDSII

Ultra high efficiency programmable output voltage over wide input voltage range, buck/boost. Input: 1.5V - 15V. Output 2V-6V

Comparator 0.6u Comparators
Ridgetop Group
0.60 µm
XC06
PT
GDSII

Ultra Low Power, Wide Supply Range, CMOS

BGR 0.6u Bandgaps
Ridgetop Group
0.60 µm
XC06
PT
GDSII

Low Power, Wide Supply Range, CMOS

TI-RF-CMP Comparators
Thesys-Intechna
0.60 µm
XT06
VS
GDSII
Schematic

TI-RF-CMP is a low power CMOS RF comparator with 4 ns propagation delay and latch function. ESD protection provided.

TI-RF-DRV Driver
Thesys-Intechna
0.60 µm
XT06
VS
GDSII
Schematic

TI-RF-DRV is a fully differential RF driver for differential signal processing applications. Common-mode level of differential outputs is adjustable that allows to shift easily the input signals for driving single-supply ADCs. ESD protection provided.

TI-RF-MUX Multiplexer
Thesys-Intechna
0.60 µm
XT06
VS
GDSII
Schematic

TI-RF-MUX is a 4-to-1 RF multiplexer designed with an internal current feedback output amplifier whose gain can be adjusted externally. There is a possibility of optional usage of two 4-to-1 devices as one 8-to-1 multiplexer. ESD protection provided.

TI-Manchester Transceiver
Thesys-Intechna
0.60 µm
XT06
VS
GDSII
Schematic

TI-Manchester is a dual data bus transceiver designed for receiving CMOS/TTL Manchester II data, converting it and transmitting through a stepup transformer to the data bus...

adc10 ADC
X-FAB
0.80 µm
CX08
PT
Analog Library
Layout
Schematic

CX08A: Analog library. ADC10 is a 10-bit analog-to-digital converter which utilizes successive approximation technique.

adc8 ADC
X-FAB
0.80 µm
CX08
PT
Schematic
Layout
Analog Library

CX08A: Analog library. ADC8 is a 8-bit analog-to-digital converter which utilizes successive-approximation
technique.

dac8 DAC
X-FAB
0.80 µm
CX08
PT
Schematic
Layout
Analog Library

CX08A: Analog library. DAC8 is a 8-bit digital-to-analog converter. The architecture is based on two resistor dividers. Because of its high output impedance, which is also code dependent, a low offset buffer operational amplifier is strictly recommen

dac10 DAC
X-FAB
0.80 µm
CX08
PT
Schematic
Layout
Analog Library

CX08A: Analog library. DAC10 is a 10-bit digital-to-analog converter. The architecture is based on two resistor dividers. Because of its high output impedance, which is also code dependent, a low offset buffer operational amplifier is strictly recomm

aopac01 Operational Amplifier
X-FAB
1.00 µm
XC10
PT
Schematic
Layout
Analog Library

XC10: A_CELLS; A_CELLS_M1. aopac01 is an internally compensated general purpose OpAmp with P-MOS input and common-source output stage.

aopac02 Operational Amplifier
X-FAB
1.00 µm
XC10
PT
Analog Library
Layout
Schematic

XC10: A_CELLS; A_CELLS_M1. aopac02 is an internally compensated rail-to-rail input/output OpAmp.

aopac03 Operational Amplifier
X-FAB
1.00 µm
XC10
PT
Analog Library
Layout
Schematic

XC10: A_CELLS; A_CELLS_M1. aopac03 is an internally compensated general purpose OpAmp with N-MOS input and bipolar pnp output stage.

aopac04 Operational Amplifier
X-FAB
1.00 µm
XC10
PT
Analog Library
Layout
Schematic

XC10: A_CELLS; A_CELLS_M1. aopac04 is a internally compensated general purpose OpAmp with P-MOS input stage.

 

MP = Mass ProductionPT = Prototyping, Silicon provenID = in DesignVS = Verified by Simulations (Soft-IP)

Displaying results 301 to 330 out of 370

*Disclaimer:
The Intellectual Partner Network is a web database provided by X-FAB in cooperation with selected partners. Both X-FAB and a variety of different IP supplier offer their IP to customers using X-FAB’s foundry process. X-FAB will support customers to get in direct contact with the relevant IP supplier.

X-FAB will take no responsibility nor any liability whatsoever for the information or products offered or provided by the other IP suppliers at the database of the Intellectual Partner Network. X-FAB shall have no liability towards the customers for any use of and/or reliance of the products provided by the other IP suppliers at the database of the Intellectual Partner Network.

X-FAB's own IP is subject to a license agreement. X-FAB IP marked with “*” are part of the Master Kit or Master Kit Plus library. If you can not find the IP you are looking for, please contact the respective sales manager in your region. We continuously extend our libraries and offer a custom cell development service as well.