IP Portal

Sel. IP Name Category Provider Geometry Process Name Status Deliverable Description
acmpc06 Comparators
X-FAB
0.60 µm
XC06
PT
Layout
Schematic
Analog Library

XC06: A_CELLS. acmpc06 is a fast rail-to-rail CMOS voltage comparator.

abgpc01 Bandgaps
X-FAB
0.60 µm
XC06
PT
Layout
Schematic
Analog Library

XC06: A_CELLS. abgpc01 is a general purpose bandgap reference with N-well resistors. This bandgap cell also provides reference voltage for some bias cells.

abgpc02 Bandgaps
X-FAB
0.60 µm
XC06
PT
Layout
Schematic
Analog Library

XC06: A_CELLS. abgpc02 is a general purpose bandgap reference with Poly0 resistors. This bandgap cell also provides reference voltage for some bias cells.

abgpc03 Bandgaps
X-FAB
0.60 µm
XC06
PT
Layout
Schematic
Analog Library

XC06: A_CELLS. abgppc03 is a low-power bandgap reference with Poly0 resistors.

aadcc01 ADC
X-FAB
0.60 µm
XC06
PT
Layout
Schematic
Analog Library

XC06: A_CELLS. aadcc01 is a 10-bit successive approximation Analog-to-digital converter (ADC). The ADC operates with a single 5V power supply and an external voltage reference.

aadcc02 ADC
X-FAB
0.60 µm
XC06
PT
Layout
Schematic
Analog Library

XC06: A_CELLS. aadcc02 is a 8-bit two-step Analog-to-Digital converter (ADC). Due to its two-step architecture aadcc02 features very low power consumption combined with moderate speed and low nonlinearity errors.

aadcc03 ADC
X-FAB
0.60 µm
XC06
PT
Layout
Schematic
Analog Library

XC06: A_CELLS. aadcc03 is a 8-bit successive approximation Analog-to-digital converter (ADC). The ADC operates with a single 5V power supply and an external voltage reference.

adacc01 DAC
X-FAB
0.60 µm
XC06
PT
Layout
Schematic
Analog Library

XC06: A_CELLS. adacc01 is a 10-bit voltage-scaling (potentiometric) digital-to-analog converter (DAC). The adacc01 DAC operates with a single 5V power supply and external reference voltage.

adacc02 DAC
X-FAB
0.60 µm
XC06
PT
Layout
Schematic
Analog Library

XC06: A_CELLS. adacc02 is a 8-bit R-2R digital-to-analog converter (DAC). The DAC operates with a single 5V power supply and external reference voltage.

adacc03 DAC
X-FAB
0.60 µm
XC06
PT
Layout
Schematic
Analog Library

XC06: A_CELLS. adacc03 is a 8-bit voltage-scaling (potentiometric) digital-to-analog converter (DAC). The adacc03 DAC operates with a single 5V power supply and external reference voltage.

arcoc01 Oscillator
X-FAB
0.60 µm
XC06
PT
Layout
Schematic
Analog Library

XC06: A_CELLS. arcoc01 is a 100kHz RC oscillator with internal R and C.

arcoc02 Oscillator
X-FAB
0.60 µm
XC06
PT
Layout
Schematic
Analog Library

XC06: A_CELLS. arcoc02 is a 200kHz adjustable, current balancing RC oscillator with internal R and C.

arcoc03 Oscillator
X-FAB
0.60 µm
XC06
PT
Layout
Schematic
Analog Library

XC06: A_CELLS. arcoc03 is a compact, low-power 10kHz RC oscillator with internal R and C. The cell is suitable for applications where accuracy and stabilty are not crucial.

arcoc04 Oscillator
X-FAB
0.60 µm
XC06
PT
Layout
Schematic
Analog Library

XC06: A_CELLS. arcoc04 is a 200kHz fixed frequency, current balancing RC oscillator with internal R and C.

arcoc05 Oscillator
X-FAB
0.60 µm
XC06
PT
Layout
Schematic
Analog Library

XC06: A_CELLS. arcoc05 is a 1MHz fixed frequency, current balancing RC oscillator with internal R and C.

arcoc06 Oscillator
X-FAB
0.60 µm
XC06
PT
Layout
Schematic
Analog Library

XC06: A_CELLS. arcoc06 is a 1MHz adjustable, current balancing RC oscillator with internal R and C.

axtoc01 Crystal Oscillators
X-FAB
0.60 µm
XC06
PT
Layout
Schematic
Analog Library

XC06: A_CELLS. axtoc01 is a 32 kHz crystal oscillator for 3.5 to 5.5V supply voltage range. An external quartz crystal has to be connected to the XTLIN and XTALOUT pins. No other external components are required.

axtoc02 Crystal Oscillators
X-FAB
0.60 µm
XC06
PT
Layout
Schematic
Analog Library

XC06: A_CELLS. axtoc02 is a 1...4 MHz crystal oscillator for supply voltage range from 3.5 to 5.5V An external quartz crystal has to be connected to the XTLIN and XTALOUT pins. No other external components are required.

axtoc03 Crystal Oscillators
X-FAB
0.60 µm
XC06
PT
Layout
Schematic
Analog Library

XC06: A_CELLS. axtoc03 is a 2...6 MHz crystal oscillator for supply voltage range from 3.5 to 5.5V. An external quartz crystal has to be connected to the XTALIN and XTALOUT pins. No other external components are required.

axtoc04 Crystal Oscillators
X-FAB
0.60 µm
XC06
PT
Layout
Schematic
Analog Library

XC06: A_CELLS.

aporc01 Power on Reset
X-FAB
0.60 µm
XC06
PT
Layout
Schematic
Analog Library

XC06: A_CELLS. aporc01 is a dynamic Power-on-Reset circuit. During power-on, POR output is kept high as long as the supply voltage is bellow the POR threshold voltage. When the threshold voltage is reached, the POR signal turns low. A delay of few microse

aporc02 Power on Reset
X-FAB
0.60 µm
XC06
PT
Layout
Schematic
Analog Library

XC06: A_CELLS. aporc02 is a Power-on-Reset circuit with hysteresis. Reset signals are generated on both the rising and falling edge of the supply voltage. During power-on, POR output is kept high as long as the supply voltage is bellow the high threshold

aporc03 Power on Reset
X-FAB
0.60 µm
XC06
PT
Layout
Schematic
Analog Library

XC06: A_CELLS. aporc03 is a Power-on-Reset circuit. Reset signals are generated on both the rising and falling edge of the supply voltage. During power-on, POR output is kept low as long as the supply voltage is bellow the threshold voltage. When the high

achpc01 Charge Pumps
X-FAB
0.60 µm
XC06
PT
Layout
Schematic
Analog Library

XC06: A_CELLS. achpc01 is a doubling charge pump 3.3V -> 5.7V. All capacitors are internal.

aopac01 Operational Amplifier
X-FAB
0.60 µm
XT06
PT
Layout
Schematic
Analog Library

XT06 aopac01 is a general purpose internally compensated CMOS OpAmp with P-MOS input stage and source follower output stage.

aopac02 Operational Amplifier
X-FAB
0.60 µm
XT06
PT
Layout
Schematic
Analog Library

XT06 aopac02 is a fast internally compensated CMOS OpAmp with N-MOS input stage and rail-to-rail output stage.

aopac03 Operational Amplifier
X-FAB
0.60 µm
XT06
PT
Layout
Schematic
Analog Library

XT06 aopac03 is a general purpose internally compensated CMOS OpAmp with N-MOS input stage and bipolar emitter follower output stage.

aopac06 Operational Amplifier
X-FAB
0.60 µm
XT06
PT
Layout
Schematic
Analog Library

XT06 aopac06 is a general purpose internally compensated CMOS OpAmp with N-MOS input stage and rail-to-rail output stage.

aopac07 Operational Amplifier
X-FAB
0.60 µm
XT06
PT
Layout
Schematic
Analog Library

XT06 aopac07 is a general purpose internally compensated CMOS OpAmp with P-MOS input stage and rail-to-rail output stage.

aopac08 Operational Amplifier
X-FAB
0.60 µm
XT06
PT
Layout
Schematic
Analog Library

XT06 aopac08 is a general purpose internally compensated CMOS OpAmp with rail-to-rail input stage and rail-to-rail output stage.

 

MP = Mass ProductionPT = Prototyping, Silicon provenID = in DesignVS = Verified by Simulations (Soft-IP)

Displaying results 241 to 270 out of 372

*Disclaimer:
The Intellectual Partner Network is a web database provided by X-FAB in cooperation with selected partners. Both X-FAB and a variety of different IP supplier offer their IP to customers using X-FAB’s foundry process. X-FAB will support customers to get in direct contact with the relevant IP supplier.

X-FAB will take no responsibility nor any liability whatsoever for the information or products offered or provided by the other IP suppliers at the database of the Intellectual Partner Network. X-FAB shall have no liability towards the customers for any use of and/or reliance of the products provided by the other IP suppliers at the database of the Intellectual Partner Network.

X-FAB's own IP is subject to a license agreement. X-FAB IP marked with “*” are part of the Master Kit or Master Kit Plus library. If you can not find the IP you are looking for, please contact the respective sales manager in your region. We continuously extend our libraries and offer a custom cell development service as well.