IP Portal

Sel. IP Name Category Provider Geometry Process Name Status Deliverable Description
acmpc11 Comparators
X-FAB
0.60 µm
XB06
PT
Layout
Schematic
Analog Library

XB06: A_CELLS. acmpc11 is low offset CMOS comparator with rail-to-rail input stage and rail-to-rail output stage.

abgpc01 Bandgaps
X-FAB
0.60 µm
XB06
PT
Layout
Schematic
Analog Library

XB06: A_CELLS. abgpc01 is a Brokaw, general-purpose bandgap reference source with high resistive poly resistor. 

abgpc03 Bandgaps
X-FAB
0.60 µm
XB06
PT
Layout
Schematic
Analog Library

XB06: A_CELLS. abgpc03 is a badgap reference with high resistive poly resistor.

abiac01 Bias
X-FAB
0.60 µm
XB06
PT
Layout
Schematic
Analog Library

XB06: A_CELLS. abiac01 is a bias voltage source (VBP1, VBN1) which needs a bandgap cell for biasing.

abiac02 Bias
X-FAB
0.60 µm
XB06
PT
Layout
Schematic
Analog Library

XB06: A_CELLS. abiac02 is a bias voltage source (VBP2, VBN2) which needs a bandgap cell for biasing.

abiac03 Bias
X-FAB
0.60 µm
XB06
PT
Layout
Schematic
Analog Library

XB06: A_CELLS. abiac03 is a bias voltage source (VBP3, VBN3) which needs a bandgap cell for biasing.

ADC10 ADC
X-FAB
0.60 µm
XB06
PT
Layout
Schematic
Analog Library

XB06: A_CELLS. ADC10 is a 10-bit analog-to-digital converter which utilizes successive approximation technique.

ADC8 ADC
X-FAB
0.60 µm
XB06
PT
Layout
Schematic
Analog Library

XB06: A_CELLS. ADC8 is a 8-bit analog-to-digital converter which utilizes successive-approximation technique.

DAC10 DAC
X-FAB
0.60 µm
XB06
PT
Layout
Schematic
Analog Library

XB06: A_CELLS. DAC10 is a 10-bit digital-to-analog converter. The architecture is based on two resistor dividers. Because of its high output impedance, which is also code dependent, a low offset buffer operational amplifier is strictly recommended at the

DAC8 DAC
X-FAB
0.60 µm
XB06
PT
Layout
Schematic
Analog Library

XB06: A_CELLS. DAC8 is a 8-bit digital-to-analog converter. The architecture is based on two resistor dividers. Because of its high output impedance, which is also code dependent, a low offset buffer operational amplifier is strictly recommended at the ou

DAC8rs DAC
X-FAB
0.60 µm
XB06
PT
Layout
Schematic
Analog Library

XB06: A_CELLS. DAC8rs is a 8-bit digital-to-analog converter. The architecture is based on a resistor divider. The output impedance is code dependent.

DAC6rs DAC
X-FAB
0.60 µm
XB06
PT
Layout
Schematic
Analog Library

XB06: A_CELLS. DAC6rs is a 6-bit digital-to-analog converter. The architecture is based on a resistor divider. The output impedance is code dependent.

aopac13 Operational Amplifier
X-FAB
0.60 µm
XC06
PT
Layout
Schematic
Analog Library

XC06: A_CELLS_HV. aopac13 is a high-voltage (VDD up to 10V), low-power, internally-compensated CMOS OpAmp with PMOS input stage.

aopac14 Operational Amplifier
X-FAB
0.60 µm
XC06
PT
Schematic
Layout
Analog Library

XC06: A_CELLS_HV. aopac14 is a high-voltage (VDD up to 10V), low-power, internally-compensated CMOS OpAmp with NMOS input stage.

aopac15 Operational Amplifier
X-FAB
0.60 µm
XC06
PT
Schematic
Layout
Analog Library

XC06: A_CELLS_HV. aopac15 is a high-voltage, internally-compensated CMOS OpAmp with NMOS input stage and bipolar emitter-follower output. The incorporated level shifters allow the EN and ENB inputs to be controlled by 5V circuitry.

abiac07 Bias
X-FAB
0.60 µm
XC06
PT
Schematic
Layout
Analog Library

XC06: A_CELLS_HV. abiac07 is a high-voltage bias cell. The circuit forces a current of 2µA (approx.) to flow through pghv PMOS with W/L ratio of 10µm/10µm and nmv NMOS with W/L ratio of 10µm/12µm.

abiac08 Bias
X-FAB
0.60 µm
XC06
PT
Schematic
Layout
Analog Library

XC06: A_CELLS_HV. abiac08 is a high-voltage bias cell. THe circuit forces a current of 2µA (approx.) to flow through pgmv PMOS with W/L ratio of 10µm/10µm and nhv NMOS with W/L ratio od 10µm/12µm. The cell features low-cost process option and is a co

adrvc01 Driver
X-FAB
0.60 µm
XC06
PT
Schematic
Layout
Analog Library

XC06: A_CELLS_HV. adrvc01 is a driver circuit for external loads (relays, LEDs, etc). The circuit features NMOS open-drain output (high-side switch). High input voltage makes the output go low (connected to ground). The rising slope of the output signal c

adrvc02 Driver
X-FAB
0.60 µm
XC06
PT
Schematic
Layout
Analog Library

XC06: A_CELLS_HV. adrvc02 is a driver circuit for external loads (relays, LEDs, etc). The circuit features NMOS open-drain output (low-side switch). High input voltage makes the output go low (connected to ground).

adrvc03 Driver
X-FAB
0.60 µm
XC06
PT
Schematic
Layout
Analog Library

XC06: A_CELLS_HV. adrvc03 is a driver circuit for external loads (relays, LEDs, etc). The circuit features NMOS open-drain output (high-side switch). High input voltage makes the output go low (connected to ground). The rising slope of the output signal c

aopac01 Operational Amplifier
X-FAB
0.60 µm
XC06
PT
Schematic
Layout
Analog Library

XC06: A_CELLS. aopac01 is a general purpose internally compensated CMOS OpAmp with P-MOS input stage and source follower output stage.

aopac02 Operational Amplifier
X-FAB
0.60 µm
XC06
PT
Layout
Schematic
Analog Library

XC06: A_CELLS. aopac02 is a fast internally compensated CMOS OpAmp with N-MOS input stage and rail-to-rail output stage. Due to the dynamic biasing of the input stage, a high slew rate is achieved, while power consumption is kept moderate.

aopac03 Operational Amplifier
X-FAB
0.60 µm
XC06
PT
Layout
Schematic
Analog Library

XC06: A_CELLS. aopac03 is a general purpose internally compensated CMOS OpAmp with N-MOS input stage and bipolar emitter follower output stage.

aopac06 Operational Amplifier
X-FAB
0.60 µm
XC06
PT
Layout
Schematic
Analog Library

XC06: A_CELLS. aopac06 is a general purpose internally compensated CMOS OpAmp with N-MOS input stage and rail-to-rail output stage.

aopac07 Operational Amplifier
X-FAB
0.60 µm
XC06
PT
Layout
Schematic
Analog Library

XC06: A_CELLS. aopac07 is a general purpose internally compensated CMOS OpAmp with P-MOS input stage and rail-to-rail output stage.

aopac08 Operational Amplifier
X-FAB
0.60 µm
XC06
PT
Layout
Schematic
Analog Library

XC06: A_CELLS. aopac08 is a general purpose internally compensated rail-to-rail input, rail-to-rail output OpAmp.

aopac09 Operational Amplifier
X-FAB
0.60 µm
XC06
PT
Layout
Schematic
Analog Library

XC06: A_CELLS. aopac09 is a fast internally compensated CMOS OpAmp with N-MOS input stage and P-MOS source follower at the output stage.

aopac10 Operational Amplifier
X-FAB
0.60 µm
XC06
PT
Layout
Schematic
Analog Library

XC06: A_CELLS. aopac10 is a fast internally compensated CMOS OpAmp with P-MOS input stage and N-MOS source follower at the output stage.

aopac11 Operational Amplifier
X-FAB
0.60 µm
XC06
PT
Layout
Schematic
Analog Library

XC06: A_CELLS. aopac11 is a low-power, internally compensated CMOS OpAmp with P-MOS input stage and N-MOS source follower at the output stage.

aopac12 Operational Amplifier
X-FAB
0.60 µm
XC06
PT
Layout
Schematic
Analog Library

XC06: A_CELLS. aopac12 is a low-power, internally compensated CMOS OpAmp with N-MOS input stage and P-MOS source follower at the output stage.

 

MP = Mass ProductionPT = Prototyping, Silicon provenID = in DesignVS = Verified by Simulations (Soft-IP)

Displaying results 91 to 120 out of 371

*Disclaimer:
The Intellectual Partner Network is a web database provided by X-FAB in cooperation with selected partners. Both X-FAB and a variety of different IP supplier offer their IP to customers using X-FAB’s foundry process. X-FAB will support customers to get in direct contact with the relevant IP supplier.

X-FAB will take no responsibility nor any liability whatsoever for the information or products offered or provided by the other IP suppliers at the database of the Intellectual Partner Network. X-FAB shall have no liability towards the customers for any use of and/or reliance of the products provided by the other IP suppliers at the database of the Intellectual Partner Network.

X-FAB's own IP is subject to a license agreement. X-FAB IP marked with “*” are part of the Master Kit or Master Kit Plus library. If you can not find the IP you are looking for, please contact the respective sales manager in your region. We continuously extend our libraries and offer a custom cell development service as well.