87 entries, filtered by: CMOS
Published: June 2008

The FC025 series is X-FAB’s 0.25-micron Modular Logic and Mixed Signal Technology. Main target applications are standard cell, semi-custom and full custom designs for consumer and communication products. Based upon an industry standard single poly with up to five metal layers 0.25-micron drawn gate length N-well process, modules are available for five layers of metal, double poly/metal capacitors, high resistive poly and dual gate oxide (5V) transistors.


More
Published: July 2008

The XC06 Series completes X-FAB‘s 0.6 Micron Modular Mixed Signal Technology with embedded Non Volatile Memory and High Voltage options. EEPROM blocks up to 32 kbit as well as Flash memories up to 512 kbit can be integrated in standard cell, semi-custom and full custom designs for Industrial, Automotive and Telecommunication products.
MOS as well as Bipolar Transistors are available with Breakdown Voltages up to 100V. The 5 V CMOS core is compatible in Design Rules and Transistor Performance with state of the art 0.6 μm CMOS Processes.
For analog applications several capacitor and resistor devices are realized, using the Double-Poly-Non-Volatile-Memory architecture.


More
Published: July 2008

The XC10 Series is X-FAB‘s One-Micron Modular Mixed Signal Technology. Main target applications are standard cell, semi-custom and full custom designs for Automotive, Consumer, Industrial and Telecommunication products. The process enables mixed-signal systems on one chip by its nonvolatile memory and sensor integration capabilities.
Based on a state of the art very cost effective single poly single metal 1.0-micron minimum feature size N-well process for mixed-signal and high voltage applications, various process modules are available for high performance analog and high voltage circuits. Using the non-volatile memory modules integration of EEPROM, OTP or NV latches is possible.
Technology variants for integrated MEMS are available.


More
Published: August 2008

The XC018 series is X-FAB’s 0.18 micron Modular Logic and Mixed Signal Technology. The platfrom is ideal for SOC application. Main target applications are standard cell, semi-custom and full custom designs for Automotive, Consumer, Industrial as well as Telecommunication products, while the low power and high voltage process is ideal for mobile applications as well as display drivers or controllers. Based upon the industrial standard single poly with up to six metal layers 0.18-micron drawn gate length N-well process, modules are also available for metal-insulatormetal capacitors, high resistive poly, dual gate oxide (1.8V with 3.3V or 5.0V) transistors.


More
Published: December 2010

The CX06 Series is X-FAB‘s 0.6 Micron Modular Mixed Signal Technology. Main target applications are standard cell, semi-custom and full custom designs for Industrial, Automotive and Telecommunication products.
Based on a state of the art single poly double metal 0.6-micron drawn gate length N-well process for digital application, process modules are available for triple metal and double poly high performance analogue circuits.


More
Published: February 2011

The CX08 Series is X-FAB‘s 0.8 Micron Modular Mixed Signal Technology. Main target applications are standard cell, semi-custom and full custom designs for Industrial, Telecommunication and Automotive products - including the 42V board net.
Based on a state of the art single poly double metal 0.8-micron drawn gate length N-well process for digital application, various process modules are available for high performance analogue and high voltage circuits.


More
Published: April 2011

The XT06 Series completes X-FAB's 0.6 Micron Modular Mixed Signal Technology.
XT06 uses dielectric isolation on SOI wafers. This allows unrestricted 60 V high and low side operation of all devices. The process offers reduced parasitics which results in smaller crosstalk, reduced noise and better EMC characteristics. Thus XT06 allows innovative circuit design with reduced circuit complexity. CMOS as well as Bipolar Transistors are available with breakdown voltages up to 110V.
The 5 V CMOS core is compatible in design rules and transistor performance with state of the art 0.6μm CMOS processes.
For analog applications several capacitor and resistor devices are realized, using the double-poly architecture.


More
Published: June 2011

XO035 is X-FAB’s specialized process for optoelectronic and high speed RF applications. It is especially suited for applications needing sensitive high bandwidth photo diodes arrays or CMOS image sensors for such applications as optical data storage, optical data communication or high dynamic range cameras.


More
Published: June 2012

The XU035 series is X-FAB’s 0.35-micrometer Modular 700V Ultra-High-Voltage (UHV) Technology. Based upon the standard 1P3M process with single 5V gate oxide, 0.35-micron drawn gate length and metal design rules, the platform is engineered for applications needing an integrated power and startup device solution.


More
Published: August 2012

The XA035 Series is X-FAB‘s 0.35 Micron High Temperature CMOS Technology. Main target applications are high temperature automotive and Industrial products with temperature range up to 175ºC. All modules are comparable in Design Rules and Transistor Performance with our corporate state of the art 0.35 μm CMOS Processes. Comprehensive design rules, precise SPICE models, analog and digital libraries, IP’s and development kits support the process on platforms supplied by the major EDA tool vendors.


More