IP Portal

30V/20mA Power Driver/Switch - Two modes of operation: switch or programmable current output; short-circuit protection, over-current detection.

This IP is a cyclic ADC based on RSD algorithm usable as core for embedded applications. The special advantage of this type of ADC is the reduced complexity of hardware resp. layout area because of the reuse of the main stages for each bit. Up to 13 bit o

XT06 aopac01 is a general purpose internally compensated CMOS OpAmp with P-MOS input stage and source follower output stage.

XT06 aopac02 is a fast internally compensated CMOS OpAmp with N-MOS input stage and rail-to-rail output stage.

XT06 aopac03 is a general purpose internally compensated CMOS OpAmp with N-MOS input stage and bipolar emitter follower output stage.

XT06 aopac06 is a general purpose internally compensated CMOS OpAmp with N-MOS input stage and rail-to-rail output stage.

XT06 aopac07 is a general purpose internally compensated CMOS OpAmp with P-MOS input stage and rail-to-rail output stage.

XT06 aopac08 is a general purpose internally compensated CMOS OpAmp with rail-to-rail input stage and rail-to-rail output stage.

XT06 aopac09 is a fast internally compensated CMOS OpAmp with N-MOS input stage and P-MOS source follower output stage.

XT06 aopac10 is a fast internally compensated CMOS OpAMp with P-MOS input stage and N-MOS source follower output stage.

XT06 aopac11 is a low-power, internally compensated CMOS OpAmp with P-MOS input stage and N-MOS source follower output stage.

XT06 aopac12 is a low-power, internally compensated CMOS OpAmp with N-MOS input stage and P-MOS source follower output stage.

XT06 acmpc01 is a low-power CMOS comparator with N-MOS input stage.

XT06 acmpc02 is a low-power CMOS comparator with P-MOS input stage.

XT06 acmpc03 is a fast CMOS comparator with N-MOS input stage. A 15mV (typ.) hysteresis is intentionally introduced to ensure proper operation.

XT06 acmpc04 is a fast CMOS comparator with P-MOS input stage. A 15mV (typ.) hysteresis is intentionally introduced to ensure proper operation.

XT06 acmpc06 is a fast rail-to-rail CMOS voltage comparator.

XT06 abgpc01 i a general purpose bandgap reference with PDIFF resistor in NWELL (rdiffp3). THis bandgap cell also provides reference voltage for some bias cell.

XT06 abgpc02 is a general purpose bandgap reference with high resistive poly0 resistor (rpolyh). This bandgap cell also provides reference voltage for some bias cells.

XT06 abgpc03 is a bandgap reference with low temperature coefficient poly0 resistor (rpoly0).

XT06 

XTabiac01 is a general purpose low-current bias cell. the circuit forces a current of 200nA (approx.) to flow through P- or N- MOS with W/L ratio of 10µm/12µm.

XT06 abiac02 is a general purpose bias cell. The circuit forces a current of 2µA (approx.) to flow through P- or N- MOS with W/L ratio of 10µm/10µm.

XT06 abiac03 is a general purpose biac cell. The circuit forces a current of10µA (approx.) to flow through P- or N- MOS with W/L ratio of 10µm/6µm.

XT06 abiac05 is a general purpose VTH - based bias cell, a cheaper substitute for abiac02. The circuit forces a current of 2µA (approx.) to flow through P- or N- MOS with W/L ratio of 10µm/10µm.

XT06 abiac06 is a general purpose V_TH - based bias cell, a cheaper substitute for abiac03. The circuit forces a current of 10µA (approx.) to flow through P- or N- MOS with W/L ration of 10µm/6µm.

XT06 aadcc01 is a 10-bit successive approximation Analog-to-Digital converter (ADC). The ADC operates with a single 5V power supply and an external voltage reference.

XT06

XT06

XT06 adacc01 is a 10-bit voltage-scaling (potentiometric) digital-to-analog converter (DAC). The adacc01 DAC operates with a single 5V power supply and external reference voltage.