IP Portal

The MR74039 is a fully integrated temperature sensor with a 12 Bit digital output designed in the XFab 0.35um XH035 process. It utilises a 12 bit Sigma Delta ADC for increased precision (0.25ºC). The temperature measurement range is fr

SA00AH8A00 is a subranging 8-bit high-speed 50MS/s Analog-to-Digital Converter(ADC) for video band and disk servo use.

SA00AH8B00 is a subranging  8-bit low-power 25MS/s Analog-to-Digital Converter(ADC) for disk servo use.

SA00PFC000 is a PLL with internal loop filter. Wide output clock freq. range : 10MHz～200MHz. Wide input clock freq. range : 2MHz～50MHz

SA00PFC010 is a PLL with internal loop filter. Wide output clock freq. range : 10MHz～160MHz. Wide input clock freq. range : 2.5MHz～6MHz.

SA00DJAA00 is a high-speed  50MS/s Digital-to-Analog Converter(DAC) for video band use.

Ultra high efficiency programmable output voltage over wide input voltage range, buck/boost. Input: 1.5V - 15V. Output 2V-6V

250kHz PWM for DC-DC converters

High Voltage Input for input voltages up to 100V

Bandgap Voltage Reference and Current Bias Cell.

Current Reference and Current Biasing Cell.

Comparator Cell with N-Channel Inputs

Resistive String architecture.

Operational Amplifier Cell with P-Channel Inputs

Reference Amplifier

Power On Reset cell

Low power voltage regulator for 1.8V logic, requires only an external capacitor, available for XC018/XH018 MOS3LP and MOS5LP, different option available on request.

Low power crystal oscillator for resonator with fast start-up, available for XC018/XH018 MOS3LP, including pads, different pads on request.

The dT2120 is designed featuring low-voltage and low-power mono ADC (Analog-to -Digital Converter) for sensor applications. The ADC architecture is using 4th-order 1bit sigma-delta modulator with 64-times oversampling. The dT2120’s in

General purpose linear voltage regulator. The circuit generates a 3.3V output voltage from an unregulated input voltage ranging from 5V to 30V. It features short circuit protection and 5mA output current capability.

2Low consumption Power-On Reset (POR) core. The core has a voltage sense (configurable 0.9V - 5.5V), an internal current bias circuit and two configurable assertion delays (default are > 1μs and > 20μs). A configurable hysteresis (default 100mV).

Low consumption combo voltage and current reference core. The circuit generates an unbuffered 1.29V, temperature compensated voltage reference (70ppm/°C) and provides a 1.6μA PMOS current branch (200ppm/°C).

General purpose, low power internal oscillator core, 12MHz. The circuit has internal level shifting and start-up circuits. A 4-bit digital bus allows frequency calibration against process variations. Current consumption <40μA, supply voltage 2.7V-3.6V

XC10: A_CELLS; A_CELLS_M1. aopac01 is an internally compensated general purpose OpAmp with P-MOS input and common-source output stage.

XC10: A_CELLS; A_CELLS_M1. aopac02 is an internally compensated rail-to-rail input/output OpAmp.

XC10: A_CELLS; A_CELLS_M1. aopac03 is an internally compensated general purpose OpAmp with N-MOS input and bipolar pnp output stage.

XC10: A_CELLS; A_CELLS_M1. aopac04 is a internally compensated general purpose OpAmp with P-MOS input stage.

XC10: A_CELLS; A_CELLS_M1. aopac05 is a fast internally compensated OpAmp with P-MOS input stage.

XC10: A_CELLS; A_CELLS_M1. aopac06 is a high-gain, high load current CMOS OpAmp with N-MOS input and rail-to-trail output stage.

XC10: A_CELLS; A_CELLS_M1. aopac07 is a general purpose internally compensated OpAmp with P-MOS input and source follower output stage.