EnDAT2.2 Soft IP MAZeT Gmbh All Geometries All Processes VS VHDL Sensor Interface used in positioning systems. Visit MAZet website for datasheet.
SUPI4 Soft IP MAZeT Gmbh All Geometries All Processes VS VHDL Interbus Slave Controller Version 4. Visit MAZeT website for datasheet.
IPMS_AES Soft IP Fraunhofer IPMS All Geometries All Processes VS VHDL Cryptographie core according to AES standard
Features
High processing speed of 100 Mbit / s (128 bit key, 25 MHz).
Same speed for coding and decoding.
Key widths of 128, 192 and 256 bit are implemented
120 kGates.
IPMS_DES Other Fraunhofer IPMS All Geometries All Processes VS VHDL Cryptographic Processor Core for the DES Algorithm
The hardware realizes a flexible DES core to encrypt and decrypt data with high speed. The encryption /decryption of a 64 bit data set takes 16 clock periods.
IPMS_ECC Soft IP Fraunhofer IPMS All Geometries All Processes VS VHDL Processor core for Elliptic Curve Cryptography
IEEE-Standard 1076-1993 compliant synthesizable VHDL model for utiliza¬tion as macro cell in ASIC and FPGA designs
Diffie-Hellman key exchange proto¬col exists
Implementation of other proto¬cols based o
IPMS_IRHSP Soft IP Fraunhofer IPMS All Geometries All Processes VS VHDL IrDA Hight Speed Protocl Stack
Features:
Complete IrDA protocol stack (IrPHY, Framer, IrLAP, IrLMP, IAS, TinyTP, IrCOMM, IrOBEX)
Primary and secondary function (scalable)
Data rates from 9.6 kbit / s - 16 Mbit / s (scalable)
IR remote control functio
IPMS_RSA Soft IP Fraunhofer IPMS All Geometries All Processes VS Verilog Cryptographic Processor Core for Public Key En¬cryption
processor core for modulo n multiplication and exponentiation (RSA) with high speed and high bit sizes
Data rates (for a 1024 bit system at 25 MHz clock frequency)
1024 bit RSA up to 10 kbit/s
aopac01 * Operational Amplifier X-FAB 1.00 µm XC10 PT Schematic XC10: A_CELLS; A_CELLS_M1. aopac01 is an internally compensated general purpose OpAmp with P-MOS input and common-source output stage.
aopac02 * Operational Amplifier X-FAB 1.00 µm XC10 PT Analog Library XC10: A_CELLS; A_CELLS_M1. aopac02 is an internally compensated rail-to-rail input/output OpAmp.
aopac03 * Operational Amplifier X-FAB 1.00 µm XC10 PT Analog Library XC10: A_CELLS; A_CELLS_M1. aopac03 is an internally compensated general purpose OpAmp with N-MOS input and bipolar pnp output stage.
aopac04 * Operational Amplifier X-FAB 1.00 µm XC10 PT Analog Library XC10: A_CELLS; A_CELLS_M1. aopac04 is a internally compensated general purpose OpAmp with P-MOS input stage.
aopac05 * Operational Amplifier X-FAB 1.00 µm XC10 PT Analog Library XC10: A_CELLS; A_CELLS_M1. aopac05 is a fast internally compensated OpAmp with P-MOS input stage.
aopac06 * Operational Amplifier X-FAB 1.00 µm XC10 PT Analog Library XC10: A_CELLS; A_CELLS_M1. aopac06 is a high-gain, high load current CMOS OpAmp with N-MOS input and rail-to-trail output stage.
aopac07 * Operational Amplifier X-FAB 1.00 µm XC10 PT Analog Library XC10: A_CELLS; A_CELLS_M1. aopac07 is a general purpose internally compensated OpAmp with P-MOS input and source follower output stage.
acmpc01 * Comparators X-FAB 1.00 µm XC10 PT Analog Library XC10: A_CELLS; A_CELLS_M1. acmpc01 is a general purpose voltage comparator with P-MOS input and hysteresis.
acmpc03 * Comparators X-FAB 1.00 µm XC10 PT Analog Library XC10: A_CELLS; A_CELLS_M1. acmpc03 is a general purpose, low-consumption voltage comparator with N-MOS input.
acmpc04 * Comparators X-FAB 1.00 µm XC10 PT Analog Library XC10: A_CELLS; A_CELLS_M1. acmpc04 is a general purpose, low power voltage comparator with P-MOS input.
abgpc01 * Bandgaps X-FAB 1.00 µm XC10 PT Analog Library XC10: A_CELLS; A_CELLS_M1. abgpc01 is a bandgap reference with well resistors.
abgpc02 * Bandgaps X-FAB 1.00 µm XC10 PT Analog Library XC10: A_CELLS; A_CELLS_M1. abgpc02 is a bandgap reference with Poly2 resistors. The cell doesn’t include an output buffer.
abgpc03 * Bandgaps X-FAB 1.00 µm XC10 PT Analog Library XC10: A_CELLS; A_CELLS_M1. abgpc03 is a bandgap reference with Poly2 resistors. The cell doesn’t include an output buffer.
abiac01 * Bias X-FAB 1.00 µm XC10 PT Analog Library XC10: A_CELLS; A_CELLS_M1. abiac01 is a general purpose VTH - based current reference. The circuit forces a current of 2.4μA (approx.) to flow through P- or N-MOS transistor with a W/L ratio of 10μm/6μm.
abiac02 * Bias X-FAB 1.00 µm XC10 PT Analog Library XC10: A_CELLS; A_CELLS_M1. abiac02 is a general purpose weak inversion bias cell. The circuit forces a current of 250nA (approx.) to flow through P- or N-MOS transistors with a W/L ratio of 10μm/10μm.
achpc01 * Charge Pumps X-FAB 1.00 µm XC10 PT Analog Library XC10: A_CELLS; A_CELLS_M1. achpc01 is doubling charge pump 5V to 8.75V.
achpc02 * Charge Pumps X-FAB 1.00 µm XC10 PT Analog Library XC10: A_CELLS; A_CELLS_M1. achpc02 is a 4-stage Dickson charge pump originally designed for EEPROM.
arcoc01 * Oscillator X-FAB 1.00 µm XC10 PT Analog Library XC10: A_CELLS; A_CELLS_M1. arcoc01 is a 200kHz fixed frequency, current balancing RC oscillator with internal R and C.
arcoc02 * Oscillator X-FAB 1.00 µm XC10 PT Analog Library XC10: A_CELLS; A_CELLS_M1. arcoc02 is a 200kHz adjustable current balancing RC oscillator with internal R and C.
arcoc03 * Oscillator X-FAB 1.00 µm XC10 PT Analog Library XC10: A_CELLS; A_CELLS_M1. arcoc03 is a 1MHz fixed frequency, current balancing RC oscillator with internal R and C.
arcoc04 * Oscillator X-FAB 1.00 µm XC10 PT Analog Library XC10: A_CELLS; A_CELLS_M1. arcoc04 is a 1MHz an adjustable current balancing RC oscillator with internal R and C.
arcoc05 * Oscillator X-FAB 1.00 µm XC10 PT Analog Library XC10: A_CELLS; A_CELLS_M1. arcoc05 is a 10kHz RC oscillator with internal R and C. The cell is suitable for applications that do not require high stability.
arcoc06 * Oscillator X-FAB 1.00 µm XC10 PT Analog Library XC10: A_CELLS; A_CELLS_M1. arcoc06 is a 100kHz RC oscillator with internal R and C.
