11 entries, filtered by: High Temperature
Published: August 2010

The XHB06 is X-FAB's 0.6 Micron High-Voltage Bipolar CMOS DMOS (BCD) Technology, optimized for applications requiring operating voltages of 5V to 30V. Main target applications are power management, RF circuits and high precision analog applications mixed with digital parts for Telecommunication, Consumer, Automotive and Industrial products. The digital part is fully compatible with X-CMOS 0.6 process family.


More
Published: May 2012

XDM10 is X-Fab´s dielectric trench insulated smart power technology. Main target applications are analog switch ICs, driver ICs for capacitive, inductive and resistive loads and EL / piezo driver ICs for applications using 110V net supply. The typical breakdown voltage of the HV-DMOS devices is >350 V or >275V. The modular process combines DMOS, bipolar and CMOS processing steps that are compatible with dielectric insulation to provide a wide variety of MOS and bipolar devices with different voltage levels within a dielectric bi-directional high voltage trench insulation on the same die.


More
Published: August 2012

The XA035 Series is X-FAB‘s 0.35 Micron High Temperature CMOS Technology. Main target applications are high temperature automotive and Industrial products with temperature range up to 175ºC. All modules are comparable in Design Rules and Transistor Performance with our corporate state of the art 0.35 μm CMOS Processes. Comprehensive design rules, precise SPICE models, analog and digital libraries, IP’s and development kits support the process on platforms supplied by the major EDA tool vendors.


More
Published: December 2012

The XH018 series is X-FAB’s 0.18 micron Modular Mixed Signal HV CMOS Technology. Based upon the industrial standard single poly with up to six metal layers 0.18 micron drawn gate length N-well process, integrated with highvoltage and Non-Volatile-Memory modules, the platform is ideal for SOC applications in the automotive market, as well as emdedded high-voltage applications in the communications, consumer and industrial market.
Comprehensive design rules, precise SPICE models, analog and digital libraries, IPs and development kits support the process for major EDA vendors.


More
Published: May 2013

The XP018 series is X-FAB’s 0.18 micron Modular Mixed Signal CMOS High Performance Analog Mixed-Signal Technology. Based upon the industrial standard single poly with up to six metal layers 0.18-micron drawn gate length N-well process, integrated with high voltage and Non-Volatile-Memory modules, the platform is engineered for applications needing an integrated solution and cost efficient process for high performance analog ICs. Targeted applications are switching applications, lighting, display, etc; operating in temperature range of -40 to 175 °C.


More
Published: March 2006

The feasibility of EEPROM memories in SOI process technologies has been proven. It has also been shown that known data retention problems at high temperatures caused by leakage currents can be solved without extra circuitry. In this paper results of EEPROM cell matrix measurements regarding functionality and reliability will be presented. Different cell designs will be compared. Furthermore, a 32x16 bit EEPROM prototype and memory test results will be shown.


More
Published: March 2010

For the first time, this paper demonstrates the experimental results for two types of test structures of field transistors up to 200°C. The field transistor structures which are stripe (conventional) and square ring (new) structures were measured and investigated in term of field leakage current and onstate characterization at high temperature.


More
Published: October 2012

By this article an introduction of a highly robust metal track layout especially suitable for high current and temperature applications will be introduced. Starting with the reliability limitations normally observed for wide metal tracks, conclusions regarding the requirements for robust layout techniques will be drawn.


More
Published: October 2009

At high temperature, designers are faced with additional technological and design challenges. These issues and how to address them are discussed in this presentation. The webinar looks at X-FAB's high temperature solutions, in particular its latest High Temperature Modular CMOS process (XA035), a comprehensive CMOS offering with High Voltage (HV), RF, and EEPROM integration that is suitable for temperatures up to 175C. The presentation also covers high temperature modelling, application specific reliability and design for reliability.


More
Published: September 2011

IC content in cars has been growing exponentially, adding significant complexity to automotive chip design and manufacturing. Today’s cars feature many semiconductor applications such as tire pressure monitoring sensors and accelerometers for airbag systems. Add electronic components to improve engine performance, increase fuel efficiency, control modern entertainment and communications devices, provide Internet capability and handle new comfort functions... Now add the challenge of making the associated ICs survive for many years in extreme heat and cold, rain and snow, salt, g-forces, humidity, dry and dusty conditions...and you’ve got your hands full designing for one of the most harsh IC operating environments. 


More