arcoc11_1v8 *
Oscillator
X-FAB
0.18 μm
XH018
PT
Analog Library Layout Schematic
XH018 LP3MOS 1.8V arcoc11_1v8 is a robust 200kHz RC oscillator with internal R and C. Frequency independent on load capacity.
arcoc12_1v8 *
Oscillator
X-FAB
0.18 μm
XH018
PT
Analog Library Layout Schematic
XH018 LP3MOS 1.8V arcoc12_1v8 is a robust 10kHz RC oscillator with internal R and C. Frequency independent on load capacity.
aregc01 *
Voltage Regulator
X-FAB
1.00 µm
XC10
PT
Analog Library Layout Schematic
XC10: A_CELLS; A_CELLS_M1. aregc01 is a 5V / 3.3V positive voltage linear regulator for up to 10 mA load current.
aregc01 *
Voltage Regulator
X-FAB
0.35 μm
XH035
PT
Layout Schematic Analog Library
XH035: A_CELLS_HV. For MOS module only. aregc01 is a 5V/3.3V linear voltage regulator for up to 20mA load current. The regulator is powered viz its high voltage input.
aregc01_3v3 *
Voltage Regulator
X-FAB
0.18 μm
XC018
PT
Layout Schematic Analog Library
XC01801_3v3 is a 3.3V/1.8V linear voltage regulator for up to 20mA load current and internal bandgap reference. The regulator is implimented as a macro cell that fits into the core-limited I/O ring.
aregc01_3v3 *
Voltage Regulator
X-FAB
0.18 μm
XH018
PT
Analog Library Layout Schematic
XH018 LP3MOS 3.3V aregc01_3v3 is a 3.3v/1.8V linear voltage regulator for up to 20mA load current and internal bandgap reference. The regulator is implemented as macro cell that fits into the core-limited I/O ring.
aregc02 *
Voltage Regulator
X-FAB
1.00 µm
XC10
PT
Analog Library Layout Schematic
XC10: A_CELLS; A_CELLS_M1. aregc02 is a 2.4V / 3.3V positive voltage switching regulator for on-chip loads and up to 10 mA load current.
aregc02 *
Voltage Regulator
X-FAB
0.35 μm
XH035
PT
Schematic Layout Analog Library
XH035: A_CELLS_HV. For MOS module only. aregc02 is a 12V/3.3V linear voltage regulator for up to 20mA load current. The regulator is powered via its high-voltage input.
atmpc01 *
Miscellaneous
X-FAB
1.00 µm
XC10
PT
Analog Library Layout Schematic
XC10: A_CELLS; A_CELLS_M1. atmpc01 is a high-temperature detector. An OVERT output signal (active low) is generated when the chip temperature rises above 140 °C (approx.).
atmpc01_3v3 *
Other
X-FAB
0.18 μm
XC018
PT
Layout Schematic Analog Library
XC018 LP 3.3V atmpc01_3v3 is an over-temperature detector. When the chip temperature rises over the high threshold temperature (~130°C) the output signal turns high.
atmpc01_3v3 *
Other
X-FAB
0.18 μm
XH018
PT
Analog Library Layout Schematic
XH018 LP3MOS 3.3V atmpc01_3v3 is a high-temperature alarm cirsuit. When the chip temperature rises over the high threshold temperature (133°C approx) an OVT (active high) signal is activated.
atmpc01_5v *
Other
X-FAB
0.18 μm
XC018
PT
Analog Library Layout Schematic
XC018 LP 5V atmpc01_5v is an over-temperature detector. When the chip temperature rises over the high threshold temperature (~125°C) the output signal turns high.
atmpc02 *
Miscellaneous
X-FAB
1.00 µm
XC10
PT
Analog Library Layout Schematic
XC10: A_CELLS; A_CELLS_M1. atmpc02 is a high-temperature detector. An OVERT output signal (active low) is generated when the chip temperature rises above 160 °C (approx.).
AV2102 600mA Buck
Voltage Regulator
Aivaka
0.60 µm
XC06
PT
GDSII
DC/DC regulator.
AV2110 600mA Buck
Voltage Regulator
Aivaka
0.60 µm
XC06
PT
GDSII
DC/DC Buck Regulator with 0% to 100% duty cycle.
avcoc01_3v3 *
VCO
X-FAB
0.18 μm
XC018
PT
Layout Schematic Analog Library
XC018 LP 3.3V avcoc01_3v3 is a voltage controlled oscillator (VCO).
axtoc01 *
Crystal Oscillators
X-FAB
0.60 µm
XC06
PT
Layout Schematic Analog Library
XC06: A_CELLS. axtoc01 is a 32 kHz crystal oscillator for 3.5 to 5.5V supply voltage range. An external quartz crystal has to be connected to the XTLIN and XTALOUT pins. No other external components are required.
axtoc01 *
Crystal Oscillators
X-FAB
0.35 μm
XH035
PT
Layout Schematic Analog Library
XH035: A_CELLS. For MOS module only. axtoc01 is a robust 2 - 8 MHz crystal oscillator for supply voltage range from 2.4 to 3.6V. An external quartz crystal is required.
axtoc01 *
Crystal Oscillators
X-FAB
0.60 µm
XT06
PT
Layout Schematic Analog Library
XT06 axtoc01 is a 32kHz crystal oscillator for 3.5 to 5.5V supply voltage range. An external quartz has to be connected to XTALIN and XTALOUT pins.
axtoc01_3v3 *
Crystal Oscillators
X-FAB
0.18 μm
XC018
PT
Layout Schematic Analog Library
XC018 LP 3.3V axtoc01_3v3 is a robust 32.768 kHz crystal oscillator for supply voltage range from 2.4 to 3.6V.
axtoc01_5v *
Crystal Oscillators
X-FAB
0.18 μm
XC018
PT
Analog Library Layout Schematic
XC018 LP 5V axtoc01_5v is a robust 32.7689 kHz crystal oscillator for supply voltage range from 3.5V to 5.5V.
axtoc02 *
Crystal Oscillators
X-FAB
1.00 µm
XC10
PT
Analog Library Layout Schematic
XC10: A_CELLS; A_CELLS_M1. axtoc02 is a 1…2MHz crystal oscillator for voltage range from 3.5V to 5.5V.
axtoc02 *
Crystal Oscillators
X-FAB
0.60 µm
XC06
PT
Layout Schematic Analog Library
XC06: A_CELLS. axtoc02 is a 1...4 MHz crystal oscillator for supply voltage range from 3.5 to 5.5V An external quartz crystal has to be connected to the XTLIN and XTALOUT pins. No other external components are required.
axtoc02 *
Crystal Oscillators
X-FAB
0.35 μm
XH035
PT
Layout Schematic Analog Library
XH035: A_CELLS. For MOS module only. axtoc02 is a robust 32,768kHz crystal oscillatior for supply voltage range from 2.4 to 2.6V. An external quartz crystal is required.
axtoc02 *
Crystal Oscillators
X-FAB
0.60 µm
XT06
PT
Layout Schematic Analog Library
XT06 axtoc02 is a 1...4MHz crystal oscillator for supply voltage range from 3.5 to 5.5V. An external quartz crystal as to be connected to XTALIN and XTALOUT pins.
axtoc02_3v3 *
Crystal Oscillators
X-FAB
0.18 μm
XC018
PT
Schematic Layout Analog Library
XC018 LP 3.3V axtoc02_3v3 is a robust 1-4 MHz crystal oscillator for supply voltage range from 2.4 to 3.6V.
axtoc02_5v *
Crystal Oscillators
X-FAB
0.18 μm
XC018
PT
Analog Library Layout Schematic
XC018 LP 5V axtoc02-5v is a robust 1-4 MHz crystal oscillator for supply voltage range from 3.5V to 5.5V.
axtoc03 *
Crystal Oscillators
X-FAB
1.00 µm
XC10
PT
Analog Library Layout Schematic
XC10: A_CELLS; A_CELLS_M1. axtoc03 is a 2…5MHz crystal oscillator for voltage range from 3.5V to 5.5V.
axtoc03 *
Crystal Oscillators
X-FAB
0.60 µm
XC06
PT
Layout Schematic Analog Library
XC06: A_CELLS. axtoc03 is a 2...6 MHz crystal oscillator for supply voltage range from 3.5 to 5.5V. An external quartz crystal has to be connected to the XTALIN and XTALOUT pins. No other external components are required.
axtoc03 *
Crystal Oscillators
X-FAB
0.60 µm
XT06
PT
Layout Schematic Analog Library
XT06 axtoc03 is a 1...6MHz crystal oscillator for supply voltage range from 3.3 to 5.5V. An external quartz crstal has to be connected to XTALIN and XTALOUT pins.