IP Portal

XB06: A_CELLS. aopac07 is a fast internal frequency-compensated CMOS operational amplifier with n-mos input stage.

XC06: A_CELLS. aopac07 is a general purpose internally compensated CMOS OpAmp with P-MOS input stage and rail-to-rail output stage.

XT06 aopac07 is a general purpose internally compensated CMOS OpAmp with P-MOS input stage and rail-to-rail output stage.

XC018 LP 3.3V aopac07_3v3 is a general purpose internally compensated rail-to-rail input, railt-to-rail ouput CMOS operational ampl;ifier (OpAmp).

XC06: A_CELLS. aopac08 is a general purpose internally compensated rail-to-rail input, rail-to-rail output OpAmp.

XH035: A_CELLS. For MOS module only. aopac08 is a general purpose internally compensated operational amplifier with N-MOS input and emitter-follower output.

XT06 aopac08 is a general purpose internally compensated CMOS OpAmp with rail-to-rail input stage and rail-to-rail output stage.

XC018 LP 3.3V aopac08_3v3 is a general internally compensated NMOS input, rail-to-rail output CMOS operational amplifier (OpAmp).

XB06: A_CELLS. aopac09 is an internal frequency-compensated CMOS operational amplifier with p-mos input stage and rail-to-rail output stage.

XC06: A_CELLS. aopac09 is a fast internally compensated CMOS OpAmp with N-MOS input stage and P-MOS source follower at the output stage.

XT06 aopac09 is a fast internally compensated CMOS OpAmp with N-MOS input stage and P-MOS source follower output stage.

XC018 LP 3.3V aopac09_3v3 is a general purpose internally compensated PMOS input, rail-to-rail output CMOS operational amplifier (OpAmp).

XB06: A_CELLS. aopac10 is an internal frequency-compensated CMOS operational amplifier with rail-to-rail input stage and rail-to-rail output stage.

XC06: A_CELLS. aopac10 is a fast internally compensated CMOS OpAmp with P-MOS input stage and N-MOS source follower at the output stage.

XT06 aopac10 is a fast internally compensated CMOS OpAMp with P-MOS input stage and N-MOS source follower output stage.

XC06: A_CELLS. aopac11 is a low-power, internally compensated CMOS OpAmp with P-MOS input stage and N-MOS source follower at the output stage.

XT06 aopac11 is a low-power, internally compensated CMOS OpAmp with P-MOS input stage and N-MOS source follower output stage.

XC06: A_CELLS. aopac12 is a low-power, internally compensated CMOS OpAmp with N-MOS input stage and P-MOS source follower at the output stage.

XH035: A_CELLS. For MOS module only. aopac12 is an internally compensated CMOS differential input - differential output (DIDO) operational amplifier with P-MOS input stage and rail-to-rail output stages.

XT06 aopac12 is a low-power, internally compensated CMOS OpAmp with N-MOS input stage and P-MOS source follower output stage.

XC06: A_CELLS_HV. aopac13 is a high-voltage (V_DD up to 10V), low-power, internally-compensated CMOS OpAmp with PMOS input stage.

XC06: A_CELLS_HV. aopac14 is a high-voltage (V_DD up to 10V), low-power, internally-compensated CMOS OpAmp with NMOS input stage.

XC06: A_CELLS_HV. aopac15 is a high-voltage, internally-compensated CMOS OpAmp with NMOS input stage and bipolar emitter-follower output. The incorporated level shifters allow the EN and ENB inputs to be controlled by 5V circuitry.

XC10: A_CELLS; A_CELLS_M1. apogc01 is a general purpose, power good detector. A power good signal (active high) is generated as long as the supply voltage at the VDDA pin lies within the 4.5V - 5.5V limits. When the supply voltage is beyond the either low

XC10: A_CELLS; A_CELLS_M1. aporc01 is a digital power-on-reset circuit. During power-on, POR output is kept high as long as the supply voltage is below the POR threshold voltage. After the threshold has been reached, the POR signals turns low. A delay of

XC06: A_CELLS. aporc01 is a dynamic Power-on-Reset circuit. During power-on, POR output is kept high as long as the supply voltage is bellow the POR threshold voltage. When the threshold voltage is reached, the POR signal turns low. A delay of few microse

XH035: A_CELLS. For MOS module only. aporc01 is a dynamic Power-on-Reset circuit. During power-on, POR output follows the supply voltage as long as it is below the threshold voltage. When the threshold voltage is reached, the POR signal turns low. A delay

XT06 aporc01 is a dynamic Power-on-Reset circuit. During power-on, POR output is kept high as long as the supply voltage is below the POR threshold voltage. When the threshold voltage is reached, the POR signal turns low.

XC018 LP 3.3V aporc01_3v3 is a dynamic power-on-reset circuit (POR). The cell is suitable for applicaitons where low consumption is important.

XC018 LP 5V aporc01_5v is a dynamic Power-on-Reset (POR) circuit. During power-on, POR output follows the supply voltage as long as it is below the threshold voltage. When the threshold voltage is reached, the POR signal turns low.