IP Portal

XC018 LP 5V aopac02_5v is a general purpose internally compensated CMOS OpAmp withP-MOS input stage and rail-to-rail output stage. The speed, gain bandwidth, and the power consumption of the amplifier are set by means of bias current.

XC018 LP 5V acmpc01_5v is a low-power current-programmable CMOS comparator with hysteresis. The input stage is P-MOS differential pair. The speed and power consumption of the comparator can be controlled by means of the bias current through the IBN input.

XC018 LP 5V acmpc02_5v is a low-power current-programmable CMOS comparator with hysteresis. The input stage is N-MOS differential pair. The speed and power consumption of the comparator can be controlled by means of the bias current through the IBN input.

XC018 LP 5V arcoc01_5v is a robust 100kHz RC oscillator with internal R and C. The cell features very low temperature coefficient of clock frequency and low power consumption.

XC018 LP 5V arcoc02_5v is a robust 1MHz RC oscillator with internal R and C. The cell features very low temperature coefficient of clock frequency and low power consumption.

XC018 LP 5V arcoc03_5v is an adjustable 100kHz, current-balancing RC oscillator with internal R and C. The very low temperature coefficient of clock frequency combined with trimming inputs, very low power consumption and compact size make the cell ideal s

XC018 LP 5V arcoc04_5v is an adjustable 1MHz, current-balancing RC oscillator with internal R and C. The very low temperature coefficient of the clock frequency combined with trimming inputs, very low power consumption and compact size make the cell ideal

XC018 LP 5V aporc01_5v is a dynamic Power-on-Reset (POR) circuit. During power-on, POR output follows the supply voltage as long as it is below the threshold voltage. When the threshold voltage is reached, the POR signal turns low.

XC018 LP 5V aporc02_5v is a Power-on-Reset (POR) circuit with hysteresis. Reset signals are generated on both the rising and falling edge of the supply voltage.

XC018 LP 5V aporc03_5v is a Power-on-Reset (POR) circuit. Reset signals are generated on both the rising and falling edge of the supply voltage.

XT06 aopac01 is a general purpose internally compensated CMOS OpAmp with P-MOS input stage and source follower output stage.

XT06 aopac02 is a fast internally compensated CMOS OpAmp with N-MOS input stage and rail-to-rail output stage.

XT06 aopac03 is a general purpose internally compensated CMOS OpAmp with N-MOS input stage and bipolar emitter follower output stage.

XT06 aopac06 is a general purpose internally compensated CMOS OpAmp with N-MOS input stage and rail-to-rail output stage.

XT06 aopac07 is a general purpose internally compensated CMOS OpAmp with P-MOS input stage and rail-to-rail output stage.

XT06 aopac08 is a general purpose internally compensated CMOS OpAmp with rail-to-rail input stage and rail-to-rail output stage.

XT06 aopac09 is a fast internally compensated CMOS OpAmp with N-MOS input stage and P-MOS source follower output stage.

XT06 aopac10 is a fast internally compensated CMOS OpAMp with P-MOS input stage and N-MOS source follower output stage.

XT06 aopac11 is a low-power, internally compensated CMOS OpAmp with P-MOS input stage and N-MOS source follower output stage.

XT06 aopac12 is a low-power, internally compensated CMOS OpAmp with N-MOS input stage and P-MOS source follower output stage.

XT06 acmpc01 is a low-power CMOS comparator with N-MOS input stage.

XT06 acmpc02 is a low-power CMOS comparator with P-MOS input stage.

XT06 acmpc03 is a fast CMOS comparator with N-MOS input stage. A 15mV (typ.) hysteresis is intentionally introduced to ensure proper operation.

XT06 acmpc04 is a fast CMOS comparator with P-MOS input stage. A 15mV (typ.) hysteresis is intentionally introduced to ensure proper operation.

XT06 acmpc06 is a fast rail-to-rail CMOS voltage comparator.

XT06 abgpc01 i a general purpose bandgap reference with PDIFF resistor in NWELL (rdiffp3). THis bandgap cell also provides reference voltage for some bias cell.

XT06 abgpc02 is a general purpose bandgap reference with high resistive poly0 resistor (rpolyh). This bandgap cell also provides reference voltage for some bias cells.

XT06 abgpc03 is a bandgap reference with low temperature coefficient poly0 resistor (rpoly0).

XT06 

XTabiac01 is a general purpose low-current bias cell. the circuit forces a current of 200nA (approx.) to flow through P- or N- MOS with W/L ratio of 10µm/12µm.