IP Portal

XC018 LP 5V abgpc04_5v is a robust low-voltage bandgap reference with N-well resistors. The cell features wide range of supply voltage and is stable even with large capacitive loads.

XC018 LP 5V aopac03_5v is a general purpose internally compensated CMOS OpAmp with N-MOS input and rail-to-rail output stage.

XC018 LP 5V aopac03_5v is a general purpose internally compensated CMOS OpAmp with P-MOS input stage and rail-to-rail output stage.

XC018 LP 5V acmpc03_5v is a rail-to-rail input, current-programmable CMOS comparator.

XC018 LP 5V axtoc01_5v is a robust 32.7689 kHz crystal oscillator for supply voltage range from 3.5V to 5.5V.

XC018 LP 5V axtoc02-5v is a robust 1-4 MHz crystal oscillator for supply voltage range from 3.5V to 5.5V.

XC018 LP 5V aadcc01_5v is a 10-bit successive approximation Analog-to-Digital converter (ADC). The ADC operated with a single 5.0V analog power supply, 1.8V digital power supply and an external voltage reference.

XC018 LP 5V is a 10-bit voltage -scaling (potentiometric) digital-to-analog converter (DAC). The DAC operates with a single 5.0V analog power supply, a 1.8V digital power supply and external reference voltage.

XC018 LP 5V aporc03_5v is a power-on-Reset circuit. Reset signals are generated on both the rising and falling edge of the supply voltage.

XC018 LP 5V atmpc01_5v is an over-temperature detector. When the chip temperature rises over the high threshold temperature (~125°C) the output signal turns high.

Low power, general purpose, 10-bit, 50kSPS, Successive Approximation Register (SAR) Analog-to-Digital Converter (ADC) core. The circuit uses one 3.3V analog supply and one 3.3V digital supply and is targeted for microcontroller applications.

General purpose capacitive sensor core. The circuit is intended for touch sensing applications for use in microcontrollers and has two multiplexed inputs. 3pF input sensibility and output frequency of 460kHz - 600kHz.

30V/20mA Power Driver/Switch - Two modes of operation: switch or programmable current output; short-circuit protection, over-current detection.

Low Power, Wide Supply Range, CMOS, output to pos rail

Ultra Low Power, Wide Supply Range, CMOS

XH018 LP3MOS 1.8V abiac06_1v8 is a general purpose low voltage (down to 1.2V) bias cell. The circuit forces a current of 2µA (approx.) to flow through N-MOS with W/L ratio of 20µm/8µm.

Low Power, Wide Supply Range, CMOS

XH018 LP3MOS 1.8V abgpc05_1v8 is a general purpose 1.2V bandgap reference with N-well resistors and NPN (qnva) diode matrix.

 XH018 LP3MOS 1.8V abgpc01_1v8 is a general purpose 1.2V bandgap reference with N-well resistirs and PNP (qpvc) diode matrix

XH018 LP3MOS 1.8Vabiac08_1v8 is a general purpose low voltage (down to 1.2V) bias cell. The circuit forces a current of 10µA (approx.) to flow through N-MOS with W/L ratio of 40µm/60µm.

XH018 LP3MOS 1.8V aopac03_1v8 is a general purpose internally compensated CMOS OpAmp with NMOS native input stage and rail-to-rail output stage. This cell provides typical value of gain bandwidth 1.1MHz and operates with V_DD down to 1.2V.

XH018 LP3MOS 1.8V aopac04_1v8 is a general purpose internally compensated CMOS OpAmp with NMOS native input stage and rail-to-rail output stage. This cell provides typical value of gain bandwidth 3.7MHz and operates with V_DD down to 1.2V.

XH018 LP3MOS 1.8V aopac09_1v8 is a general purpose internally compensated CMOS OpAmp with NMOS native input stage and rail-to-rail output stage. This cell provides typical value of gain bandwidth 162kHz.

XH018 LP3MOS 1.8V aopac10_1v8 is a general purpose internally compensated CMOS OpAmp with NMOS native input stage and rail-to-rail output stage. This cell provides typical value of gain bandwidth 382kHz.

XH018 LP3MOS 1.8V aopac11_1v8 is a general purpose internally compensated CMOS OpAmp with NMOS native input stage and rail-to-rail output stage. This cell provides typical value of gain bandwidth 1.5MHz.

XH018 LP3MOS 1.8V aopac12_1v8 is a general purpose internally compensated CMOS OpAmp with NMOS native input stage and rail-to-rail output stage. This cell provides typical value of gain bandwidth 3.8MHz.

XH018 LP3MOS 1.8V aporc02_1v8 is a Power-on-Reset circuit with hysteresis. Both high and low reset signals are available. Reset signals are generated on power-on and power-off transitions. 40mV (typ) hysteresis for safer operation.

XH018 LP3MOS 1.8V aporc03_1v8 is a Power-on-Reset circuit with hysteresis. Both high and low reset signals are available. Reset signals are generated on power-on and power-off transitions. 35mV (typ) hysteresis for safer operation.

XH018 LP3MOS 1.8V arcoc01_1v8 is a robust 1MHz low-power RC oscillator with internal R and C. The cell features low power consumption. Frequency independent on load capacity.

XH018 LP3MOS 1.8V arcoc02_1v8 is a robust 1MHz RC oscillator with internal R and C. Frequency independent on load capacity.