IP Portal

XC018 LP 3.3V aopac07_3v3 is a general purpose internally compensated rail-to-rail input, railt-to-rail ouput CMOS operational ampl;ifier (OpAmp).

XC018 LP 3.3V aopac08_3v3 is a general internally compensated NMOS input, rail-to-rail output CMOS operational amplifier (OpAmp).

XC018 LP 3.3V aopac09_3v3 is a general purpose internally compensated PMOS input, rail-to-rail output CMOS operational amplifier (OpAmp).

XC018 LP 3.3V axtoc01_3v3 is a robust 32.768 kHz crystal oscillator for supply voltage range from 2.4 to 3.6V.

XC018 LP 3.3V axtoc02_3v3 is a robust 1-4 MHz crystal oscillator for supply voltage range from 2.4 to 3.6V.

XC018 LP 3.3V aporc01_3v3 is a dynamic power-on-reset circuit (POR). The cell is suitable for applicaitons where low consumption is important.

XC018 LP 3.3V aporc02_3v3 is a Power-on-Reset circuit with hysteresis. Reset signals are generated on both the rising and falling edge of the supply voltage.

XC018 LP 3.3V aporc03_3v3 is a Power-on-Rest circuit. Reset signals are generated on both the rising and falling edge of the supply voltage.

XC01801_3v3 is a 3.3V/1.8V linear voltage regulator for up to 20mA load current and internal bandgap reference. The regulator is implimented as a macro cell that fits into the core-limited I/O ring.

XC018 LP 3.3V atmpc01_3v3 is an over-temperature detector. When the chip temperature rises over the high threshold temperature (~130°C) the output signal turns high.

XC018 LP 3.3V avcoc01_3v3 is a voltage controlled oscillator (VCO).

XC018 LP 5V abgpc01_5v is a general purpose low-power bandgap reference with N-well resistors. The cell features wide range of supply voltage and operation temperatures, compact size and low power consumption.

XC018 LP 5V abgpc02_5v is a robust low-power bandgap reference with polysilicon resistors. The cell features wide range of supply voltage and operation temperatures, compact size and low power consumption.

XC018 LP 5V abgpc03_5v is a robust low-voltage bandgap reference with N-well resistors. The cell features wide range of supply voltages and is stable with large capacitive loads.

XC018 LP 5V abgpc04_5v is a robust low-voltage bandgap reference with N-well resistors. The cell features wide range of supply voltage and is stable even with large capacitive loads.

XC018 LP 5V aopac03_5v is a general purpose internally compensated CMOS OpAmp with N-MOS input and rail-to-rail output stage.

XC018 LP 5V aopac03_5v is a general purpose internally compensated CMOS OpAmp with P-MOS input stage and rail-to-rail output stage.

XC018 LP 5V acmpc03_5v is a rail-to-rail input, current-programmable CMOS comparator.

XC018 LP 5V axtoc01_5v is a robust 32.7689 kHz crystal oscillator for supply voltage range from 3.5V to 5.5V.

XC018 LP 5V axtoc02-5v is a robust 1-4 MHz crystal oscillator for supply voltage range from 3.5V to 5.5V.

XC018 LP 5V aadcc01_5v is a 10-bit successive approximation Analog-to-Digital converter (ADC). The ADC operated with a single 5.0V analog power supply, 1.8V digital power supply and an external voltage reference.

XC018 LP 5V is a 10-bit voltage -scaling (potentiometric) digital-to-analog converter (DAC). The DAC operates with a single 5.0V analog power supply, a 1.8V digital power supply and external reference voltage.

XC018 LP 5V aporc03_5v is a power-on-Reset circuit. Reset signals are generated on both the rising and falling edge of the supply voltage.

XC018 LP 5V atmpc01_5v is an over-temperature detector. When the chip temperature rises over the high threshold temperature (~125°C) the output signal turns high.

Low power, general purpose, 10-bit, 50kSPS, Successive Approximation Register (SAR) Analog-to-Digital Converter (ADC) core. The circuit uses one 3.3V analog supply and one 3.3V digital supply and is targeted for microcontroller applications.

General purpose capacitive sensor core. The circuit is intended for touch sensing applications for use in microcontrollers and has two multiplexed inputs. 3pF input sensibility and output frequency of 460kHz - 600kHz.

30V/20mA Power Driver/Switch - Two modes of operation: switch or programmable current output; short-circuit protection, over-current detection.

Bandgap Voltage Reference and Current Bias Cell.

Current Reference and Current Biasing Cell.

Comparator Cell with N-Channel Inputs