arcoc07 * Oscillator X-FAB 0.60 µm XT06 PT Layout XT06 arcoc07 is a 10kHz low-power oscillator with internal R and C.
arcoc08 * Oscillator X-FAB 0.60 µm XT06 PT Layout XT06 arcoc08 is a 10MHz low-power oscillator with internal R and C.
arcoc09 * Oscillator X-FAB 0.60 µm XT06 PT Layout XT06 arcoc09 is a 20MHz low-power oscillator with internal R and C.
axtoc01 * Crystal Oscillators X-FAB 0.60 µm XT06 PT Layout XT06 axtoc01 is a 32kHz crystal oscillator for 3.5 to 5.5V supply voltage range. An external quartz has to be connected to XTALIN and XTALOUT pins.
axtoc02 * Crystal Oscillators X-FAB 0.60 µm XT06 PT Layout XT06 axtoc02 is a 1...4MHz crystal oscillator for supply voltage range from 3.5 to 5.5V. An external quartz crystal as to be connected to XTALIN and XTALOUT pins.
axtoc03 * Crystal Oscillators X-FAB 0.60 µm XT06 PT Layout XT06 axtoc03 is a 1...6MHz crystal oscillator for supply voltage range from 3.3 to 5.5V. An external quartz crstal has to be connected to XTALIN and XTALOUT pins.
aporc01 * Power on Reset X-FAB 0.60 µm XT06 PT Layout XT06 aporc01 is a dynamic Power-on-Reset circuit. During power-on, POR output is kept high as long as the supply voltage is below the POR threshold voltage. When the threshold voltage is reached, the POR signal turns low.
aporc02 * Power on Reset X-FAB 0.60 µm XT06 PT Layout XT06 aporc02 is a Power-on-Reset circuit with hysteresis. Reset signal are generated on both the rising and failing edge of the supply voltage. During power-on, POR outputs is kept high as long as the supply voltage is below the threshold voltage.
achpc01 * Charge Pumps X-FAB 0.60 µm XT06 PT Layout XT06 achpc01 is a doubling charge pump 3.3V => 5.6V.
AV2102 600mA Buck Voltage Regulator Aivaka 0.60 µm XC06 PT GDSII DC/DC regulator.
AV2110 600mA Buck Voltage Regulator Aivaka 0.60 µm XC06 PT GDSII DC/DC Buck Regulator with 0% to 100% duty cycle.
QCADB5_35X Other QualCore Logic, Inc. 0.35 μm XH035 PT GDSII Connectivity IP. This is a product chip.
AR32X3A ADC Archband Labs Inc. 0.25 μm FC025 PT GDSII AR32X3A is a 16-bit ADC for measurement purpose in 0.25µm node.
AR25X01 Other Archband Labs Inc. 0.25 μm FC025 PT GDSII AR25X01 is a 35mA LDO with the capless option in 0.25µm node
ADC12DR ADC A3PICs GmbH 0.60 µm XB06 PT GDSII The ADC12DR is a SAR-based low-power ADC with a 12bit resolution. Its fully differential input stage features a rail-to-rail input range. At a sampling rate of 2MS/s a power consumption of only 10mW is attained applying a 5V power suppl
Sub 1dB LNA+mixer LNA Saul Research 0.35 μm XH035 PT GDSII LNA and optional mixer based on XH035 process. Measured noise figure below 1dB including mixer. Described in a paper on the web site. The techniques are readily applied to other processes.
Low Power DDS Other Saul Research 0.35 μm XH035 PT GDSII Novel aproach to Direct Digital Synthesis, using a voltage-ladder reference. Accuracy is achieved by using a full resistor ladder array, so bit size equivalent to 12 bits has been shown. Prototypes using an 8 bit system are available on
Analogue SSB Chip Other Saul Research 0.35 μm XH035 PT GDSII Very low power (3V, 25uA) 90 degree analogue phase shifter for SSB encoding/decoding. A full description is on the web site, with all measurements.
IPMS_430 Microprocessor Fraunhofer IPMS All Geometries All Processes PT VHDL 16 Bit Microcontroller
The core IPMS_430 is compatible in its properties, like instruction set, address space and time behavior with the standard CPU MSP430 from TI. Important features are
- 16 bit Risc CPU
- 7 address modes for source operands
- 4 a
IPMS_16CXX Microprocessor Fraunhofer IPMS All Geometries All Processes PT VHDL 8 Bit Microprocessor.
The core IPMS_16CXX realizes a to the PIC 16CXX-family of the firm Microchip compatible 8-bit microcontroller Important features are:
- 8-bit arithmetic (addition, subtraction, logical operations, bit manipulation)
- to 64 k i
IPMS_16550 Soft IP Fraunhofer IPMS All Geometries All Processes PT VHDL The UART-core IPMS_16550 realize the functionality of an serial interface.
Features:
Data rates, data formats and interrupt events are programmable
compatible to UART 16550
high flexibility in different uses
IPMS_CAN Soft IP Fraunhofer IPMS All Geometries All Processes PT VHDL CAN-Controller
Features
implementation of the Basic CAN specification
no generated Overload Frames
receiving and transmitting of both identifiers (CAN specification 2.0B)
programmable data rate up to 1 Mbit/s
programmable
IPMS_IIC Other Fraunhofer IPMS All Geometries All Processes PT VHDL The core realized the I²C-bus protocol
Features:
Master and receive mode realized
Bus node address and data transmission rate are programmable
8 Bit data interface to the controller
All I²C function are implemented
Core is multimasterable
IPMS_LIN Soft IP Fraunhofer IPMS All Geometries All Processes PT VHDL LIN (Local Interconnect Network) is a serial communication protocol
Features
Support of LIN specification 2.0
Programmable data rate between 1 Kbit/s and 20 Kbit/s
4 MHz clock frequency
8-byte data buffer
8-bit host controller interface
Support of
IMMSD2026A Soft IP IMMS GmbH All Geometries All Processes PT Verilog The soft IP module D2026A implements a SENT transmitter according to SAE standard J2716 JAN2010 “SENT – Single Edge Nibble Transmission for Automotive Applications”. The SENT protocol constitutes a low-cost alternative to the LIN and CAN commu
abgpc01_3v3 * Bandgaps X-FAB 0.18 μm XC018 PT Layout XC018 LP 3.3V abgpc01 is a general purpose low-power bandgap reference with N-well resistors.
abgpc02_3v3 * Bandgaps X-FAB 0.18 μm XC018 PT Layout XC018 LP 3.3V abgpc02 is a general purpose low-power bandgap reference with rnp1 resistors
abgpc03_3V3 * Bandgaps X-FAB 0.18 μm XC018 PT Layout XC018 LP 3.3V abgpc03 is a low-voltage bandgap reference with N-well resistors.
aopac03_3v3 * Operational Amplifier X-FAB 0.18 μm XC018 PT Layout XC018 LP 3.3V aopac03_3v3 is a general purpose internally compensated rail-to-rail input, rail-to-rail output CMOS operational amplifier (OpAmp). The speed, gain bandwidth, and the power consumption of the amplifier are set by means of a bias curren
aopac06_3v3 * Operational Amplifier X-FAB 0.18 μm XC018 PT Layout XC018 LP 3.3V aopac06_3v3 is a general purpose internally compensated rail-to-rail input, rail-to-rail output CMOS operational amplifier (OpAmp).
