IP Portal

XC10: A_CELLS; A_CELLS_M1. achpc02 is a 4-stage Dickson charge pump originally designed for EEPROM.

XC10: A_CELLS; A_CELLS_M1. arcoc01 is a 200kHz fixed frequency, current balancing RC oscillator with internal R and C.

XC10: A_CELLS; A_CELLS_M1. arcoc02 is a 200kHz adjustable current balancing RC oscillator with internal R and C.

XC10: A_CELLS; A_CELLS_M1. arcoc03 is a 1MHz fixed frequency, current balancing RC oscillator with internal R and C.

XC10: A_CELLS; A_CELLS_M1. arcoc04 is a 1MHz an adjustable current balancing RC oscillator with internal R and C.

XC10: A_CELLS; A_CELLS_M1. arcoc05 is a 10kHz RC oscillator with internal R and C. The cell is suitable for applications that do not require high stability.

XC10: A_CELLS; A_CELLS_M1. aopac02 is an internally compensated rail-to-rail input/output OpAmp.

XC018 LP 5V abgpc01_5v is a general purpose low-power bandgap reference with N-well resistors. The cell features wide range of supply voltage and operation temperatures, compact size and low power consumption.

XC018 LP 5V abgpc02_5v is a robust low-power bandgap reference with polysilicon resistors. The cell features wide range of supply voltage and operation temperatures, compact size and low power consumption.

XC018 LP 5V abgpc03_5v is a robust low-voltage bandgap reference with N-well resistors. The cell features wide range of supply voltages and is stable with large capacitive loads.

XC018 LP 5V abgpc04_5v is a robust low-voltage bandgap reference with N-well resistors. The cell features wide range of supply voltage and is stable even with large capacitive loads.

XC018 LP 5V aopac03_5v is a general purpose internally compensated CMOS OpAmp with N-MOS input and rail-to-rail output stage.

XC018 LP 5V aopac03_5v is a general purpose internally compensated CMOS OpAmp with P-MOS input stage and rail-to-rail output stage.

XC018 LP 5V acmpc03_5v is a rail-to-rail input, current-programmable CMOS comparator.

XC018 LP 5V axtoc01_5v is a robust 32.7689 kHz crystal oscillator for supply voltage range from 3.5V to 5.5V.

XC018 LP 5V axtoc02-5v is a robust 1-4 MHz crystal oscillator for supply voltage range from 3.5V to 5.5V.

XC018 LP 5V aadcc01_5v is a 10-bit successive approximation Analog-to-Digital converter (ADC). The ADC operated with a single 5.0V analog power supply, 1.8V digital power supply and an external voltage reference.

XC018 LP 5V is a 10-bit voltage -scaling (potentiometric) digital-to-analog converter (DAC). The DAC operates with a single 5.0V analog power supply, a 1.8V digital power supply and external reference voltage.

XC018 LP 5V aporc03_5v is a power-on-Reset circuit. Reset signals are generated on both the rising and falling edge of the supply voltage.

XC018 LP 5V atmpc01_5v is an over-temperature detector. When the chip temperature rises over the high threshold temperature (~125°C) the output signal turns high.

This IP is a cyclic ADC based on RSD algorithm usable as core for embedded applications. The special advantage of this type of ADC is the reduced complexity of hardware resp. layout area because of the reuse of the main stages for each bit. Up to 13 bit o

DC/DC regulator.

DC/DC Buck Regulator with 0% to 100% duty cycle.

Bandgap Voltage Reference and Current Bias Cell.

Current Reference and Current Biasing Cell.

Comparator Cell with N-Channel Inputs

Resistive String architecture.

Operational Amplifier Cell with P-Channel Inputs

Reference Amplifier

Power On Reset cell