IP Portal

Sel. IP Name Category Provider Geometry Process Name Status Deliverable Description
aopac09_3v3 Operational Amplifier
X-FAB
0.18 μm
XC018
PT
Layout
Schematic
Analog Library

XC018 LP 3.3V aopac09_3v3 is a general purpose internally compensated PMOS input, rail-to-rail output CMOS operational amplifier (OpAmp).

axtoc01_3v3 Crystal Oscillators
X-FAB
0.18 μm
XC018
PT
Layout
Schematic
Analog Library

XC018 LP 3.3V axtoc01_3v3 is a robust 32.768 kHz crystal oscillator for supply voltage range from 2.4 to 3.6V.

axtoc02_3v3 Crystal Oscillators
X-FAB
0.18 μm
XC018
PT
Schematic
Layout
Analog Library

XC018 LP 3.3V axtoc02_3v3 is a robust 1-4 MHz crystal oscillator for supply voltage range from 2.4 to 3.6V.

aporc01_3v3 Power on Reset
X-FAB
0.18 μm
XC018
PT
Layout
Schematic
Analog Library

XC018 LP 3.3V aporc01_3v3 is a dynamic power-on-reset circuit (POR). The cell is suitable for applicaitons where low consumption is important.

aporc02_3v3 Power on Reset
X-FAB
0.18 μm
XC018
PT
Layout
Schematic
Analog Library

XC018 LP 3.3V aporc02_3v3 is a Power-on-Reset circuit with hysteresis. Reset signals are generated on both the rising and falling edge of the supply voltage.

aporc03_3v3 Power on Reset
X-FAB
0.18 μm
XC018
PT
Layout
Schematic
Analog Library

XC018 LP 3.3V aporc03_3v3 is a Power-on-Rest circuit. Reset signals are generated on both the rising and falling edge of the supply voltage.

aregc01_3v3 Voltage Regulator
X-FAB
0.18 μm
XC018
PT
Layout
Schematic
Analog Library

XC01801_3v3 is a 3.3V/1.8V linear voltage regulator for up to 20mA load current and internal bandgap reference. The regulator is implimented as a macro cell that fits into the core-limited I/O ring.

atmpc01_3v3 Other
X-FAB
0.18 μm
XC018
PT
Layout
Schematic
Analog Library

XC018 LP 3.3V atmpc01_3v3 is an over-temperature detector. When the chip temperature rises over the high threshold temperature (~130°C) the output signal turns high.

avcoc01_3v3 VCO
X-FAB
0.18 μm
XC018
PT
Layout
Schematic
Analog Library

XC018 LP 3.3V avcoc01_3v3 is a voltage controlled oscillator (VCO).

abgpc01_5v Bandgaps
X-FAB
0.18 μm
XC018
PT
Analog Library
Layout
Schematic

XC018 LP 5V abgpc01_5v is a general purpose low-power bandgap reference with N-well resistors. The cell features wide range of supply voltage and operation temperatures, compact size and low power consumption.

abgpc02_5v Bandgaps
X-FAB
0.18 μm
XC018
PT
Analog Library
Layout
Schematic

XC018 LP 5V abgpc02_5v is a robust low-power bandgap reference with polysilicon resistors. The cell features wide range of supply voltage and operation temperatures, compact size and low power consumption.

abgpc03_5v Bandgaps
X-FAB
0.18 μm
XC018
PT
Analog Library
Layout
Schematic

XC018 LP 5V abgpc03_5v is a robust low-voltage bandgap reference with N-well resistors. The cell features wide range of supply voltages and is stable with large capacitive loads.

abgpc04_5v Bandgaps
X-FAB
0.18 μm
XC018
PT
Analog Library
Layout
Schematic

XC018 LP 5V abgpc04_5v is a robust low-voltage bandgap reference with N-well resistors. The cell features wide range of supply voltage and is stable even with large capacitive loads.

aopac03_5v Operational Amplifier
X-FAB
0.18 μm
XC018
PT
Analog Library
Layout
Schematic

XC018 LP 5V aopac03_5v is a general purpose internally compensated CMOS OpAmp with N-MOS input and rail-to-rail output stage.

aopac03_5v Operational Amplifier
X-FAB
0.18 μm
XC018
PT
Analog Library
Layout
Schematic

XC018 LP 5V aopac03_5v is a general purpose internally compensated CMOS OpAmp with P-MOS input stage and rail-to-rail output stage.

acmpc03_5v Comparators
X-FAB
0.18 μm
XC018
PT
Analog Library
Layout
Schematic

XC018 LP 5V acmpc03_5v is a rail-to-rail input, current-programmable CMOS comparator.

axtoc01_5v Crystal Oscillators
X-FAB
0.18 μm
XC018
PT
Analog Library
Layout
Schematic

XC018 LP 5V axtoc01_5v is a robust 32.7689 kHz crystal oscillator for supply voltage range from 3.5V to 5.5V.

axtoc02_5v Crystal Oscillators
X-FAB
0.18 μm
XC018
PT
Analog Library
Layout
Schematic

XC018 LP 5V axtoc02-5v is a robust 1-4 MHz crystal oscillator for supply voltage range from 3.5V to 5.5V.

aadcc01_5v ADC
X-FAB
0.18 μm
XC018
PT
Analog Library
Layout
Schematic

XC018 LP 5V aadcc01_5v is a 10-bit successive approximation Analog-to-Digital converter (ADC). The ADC operated with a single 5.0V analog power supply, 1.8V digital power supply and an external voltage reference.

adacc01_5v ADC
X-FAB
0.18 μm
XC018
PT
Analog Library
Layout
Schematic

XC018 LP 5V is a 10-bit voltage -scaling (potentiometric) digital-to-analog converter (DAC). The DAC operates with a single 5.0V analog power supply, a 1.8V digital power supply and external reference voltage.

aporc03_5v Power on Reset
X-FAB
0.18 μm
XC018
PT
Analog Library
Layout
Schematic

XC018 LP 5V aporc03_5v is a power-on-Reset circuit. Reset signals are generated on both the rising and falling edge of the supply voltage.

atmpc01_5v Other
X-FAB
0.18 μm
XC018
PT
Analog Library
Layout
Schematic

XC018 LP 5V atmpc01_5v is an over-temperature detector. When the chip temperature rises over the high threshold temperature (~125°C) the output signal turns high.

CM2013ae ADC
chipus
0.35 μm
XH035
PT
GDSII
Verilog
LVS Netlist

Low power, general purpose, 10-bit, 50kSPS, Successive Approximation Register (SAR) Analog-to-Digital Converter (ADC) core. The circuit uses one 3.3V analog supply and one 3.3V digital supply and is targeted for microcontroller applications.

CM6011ae Other
chipus
0.35 μm
XH035
PT
GDSII
Verilog
LVS Netlist

General purpose capacitive sensor core. The circuit is intended for touch sensing applications for use in microcontrollers and has two multiplexed inputs. 3pF input sensibility and output frequency of 460kHz - 600kHz.

CM6111ae Other
chipus
0.35 μm
XH035
PT
GDSII
Verilog
LVS Netlist

30V/20mA Power Driver/Switch - Two modes of operation: switch or programmable current output; short-circuit protection, over-current detection.

DAC-7bit-0.6u DAC
Ridgetop Group
0.60 µm
XC06
PT
GDSII

Low Power, Wide Supply Range, CMOS, output to pos rail

Comparator 0.6u Comparators
Ridgetop Group
0.60 µm
XC06
PT
GDSII

Ultra Low Power, Wide Supply Range, CMOS

abiac06_1v8 Bias
X-FAB
0.18 μm
XH018
PT
Analog Library
Layout
Schematic

XH018 LP3MOS 1.8V abiac06_1v8 is a general purpose low voltage (down to 1.2V) bias cell. The circuit forces a current of 2µA (approx.) to flow through N-MOS with W/L ratio of 20µm/8µm.

BGR 0.6u Bandgaps
Ridgetop Group
0.60 µm
XC06
PT
GDSII

Low Power, Wide Supply Range, CMOS

abgpc05_1v8 Bandgaps
X-FAB
0.18 μm
XH018
PT
Layout
Schematic
Analog Library

XH018 LP3MOS 1.8V abgpc05_1v8 is a general purpose 1.2V bandgap reference with N-well resistors and NPN (qnva) diode matrix.

 

MP = Mass ProductionPT = Prototyping, Silicon provenID = in DesignVS = Verified by Simulations (Soft-IP)

Displaying results 271 to 300 out of 369

*Disclaimer:
The Intellectual Partner Network is a web database provided by X-FAB in cooperation with selected partners. Both X-FAB and a variety of different IP supplier offer their IP to customers using X-FAB’s foundry process. X-FAB will support customers to get in direct contact with the relevant IP supplier.

X-FAB will take no responsibility nor any liability whatsoever for the information or products offered or provided by the other IP suppliers at the database of the Intellectual Partner Network. X-FAB shall have no liability towards the customers for any use of and/or reliance of the products provided by the other IP suppliers at the database of the Intellectual Partner Network.

X-FAB's own IP is subject to a license agreement. X-FAB IP marked with “*” are part of the Master Kit or Master Kit Plus library. If you can not find the IP you are looking for, please contact the respective sales manager in your region. We continuously extend our libraries and offer a custom cell development service as well.