IP Portal

XT06 adacc01 is a 10-bit voltage-scaling (potentiometric) digital-to-analog converter (DAC). The adacc01 DAC operates with a single 5V power supply and external reference voltage.

XT06 adacc02 is an 8-bit R-2R digital-to-analog converter (DAC). The adacc02 DAC operates with a single 5V power supply and external reference voltage.

XT06

XT06 arcoc01 is a 100kHz oscillator with internal R and C.

XT06 arcoc02 is a 200kHz adjustable, current balancing RC oscillator with internal R and C.

XT06 arcoc03 is a compact, low-power 10kHz oscillator with internal R and C. The cell is suitable for applications where accuracy and stability are not crucial.

XT06 arcoc04 is a 200kHz fixed frequency, current balancing RC oscillator with internall R and C.

XT06 arcoc05 is a 1MHz fixed frequency, current balancing RC oscillator with internal R and C.

XT06 arcoc06 is a 1MHz adjustable, current balancing RC oscillator with internal R and C.

XT06 arcoc07 is a 10kHz low-power oscillator with internal R and C.

XT06 arcoc08 is a 10MHz low-power oscillator with internal R and C.

XT06 arcoc09 is a 20MHz low-power oscillator with internal R and C.

XT06 axtoc01 is a 32kHz crystal oscillator for 3.5 to 5.5V supply voltage range. An external quartz has to be connected to XTALIN and XTALOUT pins.

XT06 axtoc02 is a 1...4MHz crystal oscillator for supply voltage range from 3.5 to 5.5V. An external quartz crystal as to be connected to XTALIN and XTALOUT pins.

XT06 axtoc03 is a 1...6MHz crystal oscillator for supply voltage range from 3.3 to 5.5V. An external quartz crstal has to be connected to XTALIN and XTALOUT pins.

XT06 aporc01 is a dynamic Power-on-Reset circuit. During power-on, POR output is kept high as long as the supply voltage is below the POR threshold voltage. When the threshold voltage is reached, the POR signal turns low.

XT06 aporc02 is a Power-on-Reset circuit with hysteresis. Reset signal are generated on both the rising and failing edge of the supply voltage. During power-on, POR outputs is kept high as long as the supply voltage is below the threshold voltage.

XT06 aporc03 is a Power-on-Rest circuit. Reset signals are generated on both the rising and falling edge of the supply voltage. During power-on, POR output is kept high as long as the supply voltage is below the high threshold.

XT06 achpc01 is a doubling charge pump 3.3V => 5.6V.

XC018 LP 3.3V abgpc01 is a general purpose low-power bandgap reference with N-well resistors.

XC018 LP 3.3V abgpc02 is a general purpose low-power bandgap reference with rnp1 resistors

XC018 LP 3.3V abgpc03 is a low-voltage bandgap reference with N-well resistors.

XC018 LP 3.3V aopac03_3v3 is a general purpose internally compensated rail-to-rail input, rail-to-rail output CMOS operational amplifier (OpAmp). The speed, gain bandwidth, and the power consumption of the amplifier are set by means of a bias curren

XC018 LP 3.3V aopac06_3v3 is a general purpose internally compensated rail-to-rail input, rail-to-rail output CMOS operational amplifier (OpAmp).

XC018 LP 3.3V aopac07_3v3 is a general purpose internally compensated rail-to-rail input, railt-to-rail ouput CMOS operational ampl;ifier (OpAmp).

XC018 LP 3.3V aopac08_3v3 is a general internally compensated NMOS input, rail-to-rail output CMOS operational amplifier (OpAmp).

XC018 LP 3.3V aopac09_3v3 is a general purpose internally compensated PMOS input, rail-to-rail output CMOS operational amplifier (OpAmp).

XC018 LP 3.3V axtoc01_3v3 is a robust 32.768 kHz crystal oscillator for supply voltage range from 2.4 to 3.6V.

XC018 LP 3.3V axtoc02_3v3 is a robust 1-4 MHz crystal oscillator for supply voltage range from 2.4 to 3.6V.

XC018 LP 3.3V aporc01_3v3 is a dynamic power-on-reset circuit (POR). The cell is suitable for applicaitons where low consumption is important.