IP Portal

Sel. IP Name Category Provider Geometry Process Name Status Deliverable Description
aopac04 Operational Amplifier
X-FAB
1.00 µm
XC10
PT
Analog Library
Layout
Schematic

XC10: A_CELLS; A_CELLS_M1. aopac04 is a internally compensated general purpose OpAmp with P-MOS input stage.

aopac04 Operational Amplifier
X-FAB
0.35 μm
XH035
PT
Layout
Schematic
Analog Library

XH035: A_CELLS. For MOS module only. aopac04 is a general purpose internally compensated rail-to-rail input, rail-to-rail output CMOS OpAmp. Features precision quiescent current control & high output driving capabilities.

aopac03_5v Operational Amplifier
X-FAB
0.18 μm
XC018
PT
Analog Library
Layout
Schematic

XC018 LP 5V aopac03_5v is a general purpose internally compensated CMOS OpAmp with N-MOS input and rail-to-rail output stage.

aopac03_5v Operational Amplifier
X-FAB
0.18 μm
XC018
PT
Analog Library
Layout
Schematic

XC018 LP 5V aopac03_5v is a general purpose internally compensated CMOS OpAmp with P-MOS input stage and rail-to-rail output stage.

aopac03_3v3 Operational Amplifier
X-FAB
0.18 μm
XC018
PT
Layout
Schematic
Analog Library

XC018 LP 3.3V aopac03_3v3 is a general purpose internally compensated rail-to-rail input, rail-to-rail output CMOS operational amplifier (OpAmp). The speed, gain bandwidth, and the power consumption of the amplifier are set by means of a bias curren

aopac03_3v3 Operational Amplifier
X-FAB
0.18 μm
XH018
PT
Analog Library
Layout
Schematic

XH018 LP3MOS 3.3V aopac03_3v3 is a general purpose internally compensated CMOS OpAmp with N-MOS input stage and rail-to-rail output stage. The speed, gain bandwidth, and the power consumption of the amplifier are set by means of a bias current.

aopac03_1v8 Operational Amplifier
X-FAB
0.18 μm
XH018
PT
Analog Library
Layout
Schematic

XH018 LP3MOS 1.8V aopac03_1v8 is a general purpose internally compensated CMOS OpAmp with NMOS native input stage and rail-to-rail output stage. This cell provides typical value of gain bandwidth 1.1MHz and operates with VDD down to 1.2V.

aopac03 Operational Amplifier
X-FAB
1.00 µm
XC10
PT
Analog Library
Layout
Schematic

XC10: A_CELLS; A_CELLS_M1. aopac03 is an internally compensated general purpose OpAmp with N-MOS input and bipolar pnp output stage.

aopac03 Operational Amplifier
X-FAB
0.60 µm
XB06
PT
Layout
Schematic
Analog Library

XB06: A_CELLS. aopac03 is a fast internal frequency-compensated CMOS operational amplifier with p-mos input stage

aopac03 Operational Amplifier
X-FAB
0.60 µm
XC06
PT
Layout
Schematic
Analog Library

XC06: A_CELLS. aopac03 is a general purpose internally compensated CMOS OpAmp with N-MOS input stage and bipolar emitter follower output stage.

aopac03 Operational Amplifier
X-FAB
0.35 μm
XH035
PT
Layout
Schematic
Analog Library

XH035: A_CELLS. For MOS module only. aopac03 is a general purpose internally compensated rai-to-rail input, rail-to-rail output CMOS OpAmp. It features low input offset voltage and high output driving capabilities.

aopac03 Operational Amplifier
X-FAB
0.60 µm
XT06
PT
Layout
Schematic
Analog Library

XT06 aopac03 is a general purpose internally compensated CMOS OpAmp with N-MOS input stage and bipolar emitter follower output stage.

aopac02_5v Operational Amplifier
X-FAB
0.18 μm
XC018
PT
Layout
Schematic
Analog Library

XC018 LP 5V aopac02_5v is a general purpose internally compensated CMOS OpAmp withP-MOS input stage and rail-to-rail output stage. The speed, gain bandwidth, and the power consumption of the amplifier are set by means of bias current.

aopac02_3v3 Operational Amplifier
X-FAB
0.18 μm
XC018
PT
Layout
Schematic
Analog Library

XC018 LP 3.3V aopac02_3v3 is a general purpose internally compensated CMOS OpAmp with P-MOS input stage and rail-to-rail output stage. The speed, gain bandwidth, and the power consumption of the amplifier are set by means of bias current.

aopac02_3v3 Operational Amplifier
X-FAB
0.18 μm
XH018
PT
Analog Library
Layout
Schematic

XH018 LP3MOS 3.3V aopac02_3v3 is a general purpose internally compensated CMOS OpAmp with P-MOS input stage and rail-to-rail output stage. The speed, gain bandwidth, and the power consumption of the amplifier are set by means of a bias current.

aopac02 Operational Amplifier
X-FAB
1.00 µm
XC10
PT
Analog Library
Layout
Schematic

XC10: A_CELLS; A_CELLS_M1. aopac02 is an internally compensated rail-to-rail input/output OpAmp.

aopac02 Operational Amplifier
X-FAB
0.60 µm
XB06
PT
Layout
Schematic
Analog Library

XB06: A_CELLS. aopac02 is an internal frequency-compensated CMOS operational amplifier with p-mos input stage

aopac02 Operational Amplifier
X-FAB
0.60 µm
XC06
PT
Layout
Schematic
Analog Library

XC06: A_CELLS. aopac02 is a fast internally compensated CMOS OpAmp with N-MOS input stage and rail-to-rail output stage. Due to the dynamic biasing of the input stage, a high slew rate is achieved, while power consumption is kept moderate.

aopac02 Operational Amplifier
X-FAB
0.35 μm
XH035
PT
Layout
Schematic
Analog Library

XH035: A_CELLS. For MOS module only. aopac02 is a general purpose internally compensated CMOS OpAmp with P-MOS input stage and rail-to-rail output stage.

aopac02 Operational Amplifier
X-FAB
0.60 µm
XT06
PT
Layout
Schematic
Analog Library

XT06 aopac02 is a fast internally compensated CMOS OpAmp with N-MOS input stage and rail-to-rail output stage.

aopac01_5v Operational Amplifier
X-FAB
0.18 μm
XC018
PT
Layout
Schematic
Analog Library

XC018 LP 5V aopac01_5v is a general purpose internally compensated CMOS OpAmp with N-MOS input stage and rail-to-rail output stage. The speed, gain bandwidth, and the power consumption of the amplifier are set by means of bias current.

aopac01_3v3 Operational Amplifier
X-FAB
0.18 μm
XC018
PT
Layout
Schematic
Analog Library

XC018 LP 3.3V aopac01_3v3 is a general purpose internally compensated CMOS OpAmp with N-MOS input stage and rail-to-rail output stage. The speed, gain bandwidth, and the power consumption of the amplifier are set by means of a bias current.

aopac01_3v3 Operational Amplifier
X-FAB
0.18 μm
XH018
PT
Analog Library
Layout
Schematic

XH018 LP3MOS 3.3V aopac01_3v3 is a general purpose internally compensated CMOS OpAmp with N-MOS input stage and rail-to-rail output stage. The speed, gain bandwidth, and the power consumption of the amplifier are set by means of a bias current.

aopac01 Operational Amplifier
X-FAB
1.00 µm
XC10
PT
Schematic
Layout
Analog Library

XC10: A_CELLS; A_CELLS_M1. aopac01 is an internally compensated general purpose OpAmp with P-MOS input and common-source output stage.

aopac01 Operational Amplifier
X-FAB
0.60 µm
XB06
PT
Schematic
Layout
Analog Library

XB06: A_CELLS. aopac01 is a low power internal frequency-compensated CMOS operational amplifier with pmos input stage

aopac01 Operational Amplifier
X-FAB
0.60 µm
XC06
PT
Schematic
Layout
Analog Library

XC06: A_CELLS. aopac01 is a general purpose internally compensated CMOS OpAmp with P-MOS input stage and source follower output stage.

aopac01 Operational Amplifier
X-FAB
0.35 μm
XH035
PT
Layout
Schematic
Analog Library

XH035: A_CELLS. For MOS module only. aopac01 is a general purpose internally compensated CMOS OpAmp with N-MOS input stage and rail-to-tail output stage.

aopac01 Operational Amplifier
X-FAB
0.60 µm
XT06
PT
Layout
Schematic
Analog Library

XT06 aopac01 is a general purpose internally compensated CMOS OpAmp with P-MOS input stage and source follower output stage.

Analogue SSB Chip Other
Saul Research
0.35 μm
XH035
PT
GDSII
Schematic

Very low power (3V, 25uA) 90 degree analogue phase shifter for SSB encoding/decoding. A full description is on the web site, with all measurements.

adrvc03 Driver
X-FAB
0.60 µm
XC06
PT
Schematic
Layout
Analog Library

XC06: A_CELLS_HV. adrvc03 is a driver circuit for external loads (relays, LEDs, etc). The circuit features NMOS open-drain output (high-side switch). High input voltage makes the output go low (connected to ground). The rising slope of the output signal c

 

MP = Mass ProductionPT = Prototyping, Silicon provenID = in DesignVS = Verified by Simulations (Soft-IP)

Displaying results 211 to 240 out of 372

*Disclaimer:
The Intellectual Partner Network is a web database provided by X-FAB in cooperation with selected partners. Both X-FAB and a variety of different IP supplier offer their IP to customers using X-FAB’s foundry process. X-FAB will support customers to get in direct contact with the relevant IP supplier.

X-FAB will take no responsibility nor any liability whatsoever for the information or products offered or provided by the other IP suppliers at the database of the Intellectual Partner Network. X-FAB shall have no liability towards the customers for any use of and/or reliance of the products provided by the other IP suppliers at the database of the Intellectual Partner Network.

X-FAB's own IP is subject to a license agreement. X-FAB IP marked with “*” are part of the Master Kit or Master Kit Plus library. If you can not find the IP you are looking for, please contact the respective sales manager in your region. We continuously extend our libraries and offer a custom cell development service as well.