IP Portal

XH035: A_CELLS. For MOS module only. aadcc02 is a 10-bit successive approximation Analog-to-Digital converter (ADC). The ADC operates with a single 3.3V power supply and external voltage reference.

XH035: A_CELLS. For MOS module only. adacc02 is a bit-bit voltage-scaling (potentiometric) Digital-to-Analog converter (DAC). The DAC operates with a single 3.3V power supply and external reference voltage.

XH035: A_CELLS. For MOS module only. arcoc01 is a 14kHz RC oscillator with internal R and C. The cell features low power consumption and compact size, it is suitable for low-demanding applications.

XH035: A_CELLS. For MOS module only. arcoc02 is a 200kHz high performance, current-balancing RC oscillator with internal R and C. The cell features very low temperature coefficient of clock frequency and low power consumption.

XH035: A_CELLS. For MOS module only. arcoc03 is a 1MHz high performance, current-balancing RC oscillator with internal R and C. The cell features very low temperature coefficient of clock frequency and low power consumption.

XH035: A_CELLS. For MOS module only. arcoc04 is an adjustable 200kHz, current-balancing RC oscillator with internal R and C. The very low temperature and voltage coefficients of clock frequency combined with trimming inputs, very low power consumptio

XH035: A_CELLS. For MOS module only. arcoc03 is an adjustable 1MHz, current-balancing RC oscillator with internal R and C. The very low temperature and voltage coefficients of clock frequency combined with trimming inputs, very low power consumption

XH035: A_CELLS. For MOS module only. arcoc06 is a 1 to 10MHz, current-controlled oscillator (CCO) with no external components. Clock frequency is set by means of bias current. The cell features compact size, low temperature and voltage coefficients of clo

XH035: A_CELLS. For MOS module only. axtoc01 is a robust 2 - 8 MHz crystal oscillator for supply voltage range from 2.4 to 3.6V. An external quartz crystal is required.

XH035: A_CELLS. For MOS module only. axtoc02 is a robust 32,768kHz crystal oscillatior for supply voltage range from 2.4 to 2.6V. An external quartz crystal is required.

XH035: A_CELLS. For MOS module only. aporc01 is a dynamic Power-on-Reset circuit. During power-on, POR output follows the supply voltage as long as it is below the threshold voltage. When the threshold voltage is reached, the POR signal turns low. A delay

XH035: A_CELLS. For MOS module only. aporc02 is a Power-on-Reset circuit with hysteresis. Reset signals are generated on both the rising and falling edge of the supply voltage. During power-on, POR output follows the supply voltage as long as it is b

XH035: A_CELLS. For MOS module only. aporc03 is a Power-on-Reset circuit. Reset signals are generated on both the rising and falling edge of the supply voltage. During power-on, POR output follows the supply voltage as long as it is below the threshold v

XH035: A_CELLS_HV. For MOS module only. aregc01 is a 5V/3.3V linear voltage regulator for up to 20mA load current. The regulator is powered viz its high voltage input.

XC018 LP 3.3V abiac02_3v3 is a general purpose bias cell. The circuit forces a current of 2µA (approx.) to flow through PMOS with W/L ratio of 10µm/4µm and NMOS with W/L ratio od 6µm/12µm.

XC018 LP 3.3V abiac01_3v3 is a general purpose bias cell. The circuit forces a current of 200nA (approx.) to flow through PMOS with W/L ratio of 8µm/10µm and NMOS with W/L ratio of 4µm/20µm.

XH035: DIVIDER Library: RF_DIVIDER_CELLS. DIV32 is a Prescaler with a fixed ratio of 32. It should be biased by the RF bias cell.

XC018 LP 3.3V acmpc01_3v3 is a low-power current-programmable CMOS comparator with hysteresis. The input stage is P-MOS differential pair. The speed and power consumption of the comparator can be controlled by means of the bias current through the IBN inp

XC018 LP 3.3V acmpc02_3v3 is a low-power current-programmable CMOS comparator with hysteresis. The input stage is N-MOS differential pair.

XC018 LP 3.3V acmpc03_3v3 is a rail-to-rail input, current-programmable CMOS comparator. The speed and power consumption of the comparator can be controlled by means of the bias current through the IBN input.

XC018 LP 3.3V aadcc01_3v3 is a 10-bit successive approximation Analog-to-Digital converter (ADC). The ADC operates with a single 3.3V power supply and an external voltage reference.

XC018 LP 3.3V adacc01_3v3 is a 10-bit voltage-scaling (potentionetric) Digital-to-Analog converter (DAC). The adacc01 DAC operates with a single 3.3V power supply and external reference voltage.

XC018 LP 5V abiac06_5v is a general purpose bias cell. The circuit forces a current of 10µA (approx.) to flow through PMOS with W/L ratio of 24µm/3µm and NMOS with W/L ratio of 10µm/4µm.

XC018 LP 5V abiac07_5v is a general purpose bias cell. The circuit forces a current of 2µA (approx.) to flow through PMOS with W/L ratio of 10µm/6µm and NMOS with W/L ratio of 10µm/12µm.

XC018 LP 5v acsoc01_5v is a compact general purpose current source. The circuit has four outputs that drive currents of 1µA, 2µA, 4µA, and 8µA, respectively.

XC018 LP 5v acsoc02_5v is a compact general purpose current source. The circuit has four outputs that drive currents of 200nA each.

XC018 LP 5V aopac01_5v is a general purpose internally compensated CMOS OpAmp with N-MOS input stage and rail-to-rail output stage. The speed, gain bandwidth, and the power consumption of the amplifier are set by means of bias current.

XC018 LP 5V aopac02_5v is a general purpose internally compensated CMOS OpAmp withP-MOS input stage and rail-to-rail output stage. The speed, gain bandwidth, and the power consumption of the amplifier are set by means of bias current.

XC018 LP 5V acmpc01_5v is a low-power current-programmable CMOS comparator with hysteresis. The input stage is P-MOS differential pair. The speed and power consumption of the comparator can be controlled by means of the bias current through the IBN input.

XC018 LP 5V acmpc02_5v is a low-power current-programmable CMOS comparator with hysteresis. The input stage is N-MOS differential pair. The speed and power consumption of the comparator can be controlled by means of the bias current through the IBN input.