IP Portal

XC06: A_CELLS. arcoc02 is a 200kHz adjustable, current balancing RC oscillator with internal R and C.

XC06: A_CELLS. arcoc03 is a compact, low-power 10kHz RC oscillator with internal R and C. The cell is suitable for applications where accuracy and stabilty are not crucial.

XC06: A_CELLS. arcoc04 is a 200kHz fixed frequency, current balancing RC oscillator with internal R and C.

XC06: A_CELLS. arcoc05 is a 1MHz fixed frequency, current balancing RC oscillator with internal R and C.

XC06: A_CELLS. arcoc06 is a 1MHz adjustable, current balancing RC oscillator with internal R and C.

XC06: A_CELLS. axtoc01 is a 32 kHz crystal oscillator for 3.5 to 5.5V supply voltage range. An external quartz crystal has to be connected to the XTLIN and XTALOUT pins. No other external components are required.

XC06: A_CELLS. axtoc02 is a 1...4 MHz crystal oscillator for supply voltage range from 3.5 to 5.5V An external quartz crystal has to be connected to the XTLIN and XTALOUT pins. No other external components are required.

XC06: A_CELLS. axtoc03 is a 2...6 MHz crystal oscillator for supply voltage range from 3.5 to 5.5V. An external quartz crystal has to be connected to the XTALIN and XTALOUT pins. No other external components are required.

XC06: A_CELLS.

XC06: A_CELLS. aporc01 is a dynamic Power-on-Reset circuit. During power-on, POR output is kept high as long as the supply voltage is bellow the POR threshold voltage. When the threshold voltage is reached, the POR signal turns low. A delay of few microse

XC06: A_CELLS. aporc02 is a Power-on-Reset circuit with hysteresis. Reset signals are generated on both the rising and falling edge of the supply voltage. During power-on, POR output is kept high as long as the supply voltage is bellow the high threshold

XC06: A_CELLS. aporc03 is a Power-on-Reset circuit. Reset signals are generated on both the rising and falling edge of the supply voltage. During power-on, POR output is kept low as long as the supply voltage is bellow the threshold voltage. When the high

XC06: A_CELLS. achpc01 is a doubling charge pump 3.3V -> 5.7V. All capacitors are internal.

XH035: A_CELLS. For MOS module only. aopac01 is a general purpose internally compensated CMOS OpAmp with N-MOS input stage and rail-to-tail output stage.

XH035: A_CELLS. For MOS module only. aopac02 is a general purpose internally compensated CMOS OpAmp with P-MOS input stage and rail-to-rail output stage.

XH035: A_CELLS. For MOS module only. aopac05 is a low-power internally compensated with P-MOS input and rail-to-rail output.

XH035: A_CELLS. For MOS module only. aopac03 is a general purpose internally compensated rai-to-rail input, rail-to-rail output CMOS OpAmp. It features low input offset voltage and high output driving capabilities.

XH035: A_CELLS. For MOS module only. aopac04 is a general purpose internally compensated rail-to-rail input, rail-to-rail output CMOS OpAmp. Features precision quiescent current control & high output driving capabilities.

XH035: A_CELLS. For MOS module only. aopac06 is a fast internally compensated with N-MOS input and rail-to-rail output.

XH035: A_CELLS. For MOS module only. aopac08 is a general purpose internally compensated operational amplifier with N-MOS input and emitter-follower output.

XH035: A_CELLS. For MOS module only. aopac12 is an internally compensated CMOS differential input - differential output (DIDO) operational amplifier with P-MOS input stage and rail-to-rail output stages.

XH035: A_CELLS. For MOS module only. acmpc01 is a low-power CMOS comparator with hysteresis. The input stage is P-MOS differential pair.

XH035: A_CELLS. For MOS module only. acmpc02 is a low-power CMOS comparator with hysteresis. The input stage is N-MOS differential pair.

XH035: A_CELLS. For MOS module only. acmpc03 is a rail-to-rail CMOS comparator.

XH035: A_CELLS. For MOS module only. acmpc04 is a current-programmable rail-to-rail CMOS voltage comparator. The speed and the power consumption of the cell are programmed by means of bias current.

XH035: A_CELLS. For MOS module only. abgpc01 is a general purpose bandgap reference with N-well resistors.

XH035: A_CELLS. For MOS module only. abgpc02 is a general purpose bandgap reference with Poly2 resistors.

XH035: A_CELLS. For MOS module only. abgpc04 is a general purpose bandgap reference with Poly2 resistors.

XH035: A_CELLS. For MOS module only. abgpc07 is a low-supply voltage bandgap reference with N-well resistors. The cell features low supply current and low noise.

XH035: A_CELLS. For MOS module only. abiac01 is a general purpose bias cell. The circuit forces a current of 2µA (approx.) to flow through PMOS with W/L ratio of 6µm/6µm and NMOS with W/L ration of 6µm/6µm.