IP Portal

XC06: A_CELLS. aadcc01 is a 10-bit successive approximation Analog-to-digital converter (ADC). The ADC operates with a single 5V power supply and an external voltage reference.

XC06: A_CELLS. aadcc02 is a 8-bit two-step Analog-to-Digital converter (ADC). Due to its two-step architecture aadcc02 features very low power consumption combined with moderate speed and low nonlinearity errors.

XC06: A_CELLS. aadcc03 is a 8-bit successive approximation Analog-to-digital converter (ADC). The ADC operates with a single 5V power supply and an external voltage reference.

XC06: A_CELLS. adacc01 is a 10-bit voltage-scaling (potentiometric) digital-to-analog converter (DAC). The adacc01 DAC operates with a single 5V power supply and external reference voltage.

XC06: A_CELLS. adacc02 is a 8-bit R-2R digital-to-analog converter (DAC). The DAC operates with a single 5V power supply and external reference voltage.

XC06: A_CELLS. adacc03 is a 8-bit voltage-scaling (potentiometric) digital-to-analog converter (DAC). The adacc03 DAC operates with a single 5V power supply and external reference voltage.

XC06: A_CELLS. arcoc01 is a 100kHz RC oscillator with internal R and C.

XC06: A_CELLS. arcoc02 is a 200kHz adjustable, current balancing RC oscillator with internal R and C.

XC06: A_CELLS. arcoc03 is a compact, low-power 10kHz RC oscillator with internal R and C. The cell is suitable for applications where accuracy and stabilty are not crucial.

XC06: A_CELLS. arcoc04 is a 200kHz fixed frequency, current balancing RC oscillator with internal R and C.

XC06: A_CELLS. arcoc05 is a 1MHz fixed frequency, current balancing RC oscillator with internal R and C.

XC06: A_CELLS. arcoc06 is a 1MHz adjustable, current balancing RC oscillator with internal R and C.

XC06: A_CELLS. axtoc01 is a 32 kHz crystal oscillator for 3.5 to 5.5V supply voltage range. An external quartz crystal has to be connected to the XTLIN and XTALOUT pins. No other external components are required.

XC06: A_CELLS. axtoc02 is a 1...4 MHz crystal oscillator for supply voltage range from 3.5 to 5.5V An external quartz crystal has to be connected to the XTLIN and XTALOUT pins. No other external components are required.

XC06: A_CELLS. axtoc03 is a 2...6 MHz crystal oscillator for supply voltage range from 3.5 to 5.5V. An external quartz crystal has to be connected to the XTALIN and XTALOUT pins. No other external components are required.

XC06: A_CELLS.

XC06: A_CELLS. aporc01 is a dynamic Power-on-Reset circuit. During power-on, POR output is kept high as long as the supply voltage is bellow the POR threshold voltage. When the threshold voltage is reached, the POR signal turns low. A delay of few microse

XC06: A_CELLS. aporc02 is a Power-on-Reset circuit with hysteresis. Reset signals are generated on both the rising and falling edge of the supply voltage. During power-on, POR output is kept high as long as the supply voltage is bellow the high threshold

XC06: A_CELLS. aporc03 is a Power-on-Reset circuit. Reset signals are generated on both the rising and falling edge of the supply voltage. During power-on, POR output is kept low as long as the supply voltage is bellow the threshold voltage. When the high

XC06: A_CELLS. achpc01 is a doubling charge pump 3.3V -> 5.7V. All capacitors are internal.

XT06 aopac01 is a general purpose internally compensated CMOS OpAmp with P-MOS input stage and source follower output stage.

XT06 aopac02 is a fast internally compensated CMOS OpAmp with N-MOS input stage and rail-to-rail output stage.

XT06 aopac03 is a general purpose internally compensated CMOS OpAmp with N-MOS input stage and bipolar emitter follower output stage.

XT06 aopac06 is a general purpose internally compensated CMOS OpAmp with N-MOS input stage and rail-to-rail output stage.

XT06 aopac07 is a general purpose internally compensated CMOS OpAmp with P-MOS input stage and rail-to-rail output stage.

XT06 aopac08 is a general purpose internally compensated CMOS OpAmp with rail-to-rail input stage and rail-to-rail output stage.

XT06 aopac09 is a fast internally compensated CMOS OpAmp with N-MOS input stage and P-MOS source follower output stage.

XT06 aopac10 is a fast internally compensated CMOS OpAMp with P-MOS input stage and N-MOS source follower output stage.

XT06 aopac11 is a low-power, internally compensated CMOS OpAmp with P-MOS input stage and N-MOS source follower output stage.

XT06 aopac12 is a low-power, internally compensated CMOS OpAmp with N-MOS input stage and P-MOS source follower output stage.