IP Portal

XC018 LP 3.3V abiac01_3v3 is a general purpose bias cell. The circuit forces a current of 200nA (approx.) to flow through PMOS with W/L ratio of 8µm/10µm and NMOS with W/L ratio of 4µm/20µm.

XC018 LP 3.3V abiac02_3v3 is a general purpose bias cell. The circuit forces a current of 2µA (approx.) to flow through PMOS with W/L ratio of 10µm/4µm and NMOS with W/L ratio od 6µm/12µm.

XC018 LP 3.3V abiac03_3v3 is a general purpose bias cell. The circuit forces a current of 10µA (approx.) to flow through PMOS with W/L ratio of 24µm/2µm and NMOS with W/L ratio od 14µm/6µm.

XC018 LP 3.3V acsoc01_3v3 is a compact general purpose current source. The circuit has four outputs that drive currents of 200nA each. 

XC018 LP 3.3V acsoc02_3v3 is a compact general purpose current source. The circuit has four outputs that drive currents of 1µA; 2µA; 4µA; and 8µA, respectively.

XC018 LP 3.3V aopac01_3v3 is a general purpose internally compensated CMOS OpAmp with N-MOS input stage and rail-to-rail output stage. The speed, gain bandwidth, and the power consumption of the amplifier are set by means of a bias current.

XC018 LP 3.3V aopac02_3v3 is a general purpose internally compensated CMOS OpAmp with P-MOS input stage and rail-to-rail output stage. The speed, gain bandwidth, and the power consumption of the amplifier are set by means of bias current.

XC018 LP 3.3V acmpc01_3v3 is a low-power current-programmable CMOS comparator with hysteresis. The input stage is P-MOS differential pair. The speed and power consumption of the comparator can be controlled by means of the bias current through the IBN inp

XC018 LP 3.3V acmpc02_3v3 is a low-power current-programmable CMOS comparator with hysteresis. The input stage is N-MOS differential pair.

XC018 LP 3.3V acmpc03_3v3 is a rail-to-rail input, current-programmable CMOS comparator. The speed and power consumption of the comparator can be controlled by means of the bias current through the IBN input.

XC018 LP 3.3V arcoc01_3v3 is a robust 100kHz RC oscillator with internal R and C. The cell features low temperature coefficient of clock frequency and low power consumption. 

XC018 LP 3.3V arcoc02_3v3 is a robust 1MHz RC oscillator with internall R and C. The cell features low temperature coefficient of clock frequency and low power consumption.

XC018 LP 3.3V is an adjustable 100kHz, current-balancing RC oscillator with internal R and C. The very low temperature coefficient of th clock frequency combined with trimming inputs, very low power consumption and compact size make the cell a good soluti

XC018 LP 3.3V arcoc04_3v3 is an adjustable 1MHz, current-balancing RC oscillator with internal R and C. The very low temperature coefficient of the clock frequency combined with trimming inputs, very low power consumption and compact size make the cell a

XC018 LP 3.3V aadcc01_3v3 is a 10-bit successive approximation Analog-to-Digital converter (ADC). The ADC operates with a single 3.3V power supply and an external voltage reference.

XC018 LP 3.3V adacc01_3v3 is a 10-bit voltage-scaling (potentionetric) Digital-to-Analog converter (DAC). The adacc01 DAC operates with a single 3.3V power supply and external reference voltage.

XC018 LP 5V abiac06_5v is a general purpose bias cell. The circuit forces a current of 10µA (approx.) to flow through PMOS with W/L ratio of 24µm/3µm and NMOS with W/L ratio of 10µm/4µm.

XC018 LP 5V abiac07_5v is a general purpose bias cell. The circuit forces a current of 2µA (approx.) to flow through PMOS with W/L ratio of 10µm/6µm and NMOS with W/L ratio of 10µm/12µm.

XC018 LP 5v acsoc01_5v is a compact general purpose current source. The circuit has four outputs that drive currents of 1µA, 2µA, 4µA, and 8µA, respectively.

XC018 LP 5v acsoc02_5v is a compact general purpose current source. The circuit has four outputs that drive currents of 200nA each.

XC018 LP 5V aopac01_5v is a general purpose internally compensated CMOS OpAmp with N-MOS input stage and rail-to-rail output stage. The speed, gain bandwidth, and the power consumption of the amplifier are set by means of bias current.

XC018 LP 5V aopac02_5v is a general purpose internally compensated CMOS OpAmp withP-MOS input stage and rail-to-rail output stage. The speed, gain bandwidth, and the power consumption of the amplifier are set by means of bias current.

XC018 LP 5V acmpc01_5v is a low-power current-programmable CMOS comparator with hysteresis. The input stage is P-MOS differential pair. The speed and power consumption of the comparator can be controlled by means of the bias current through the IBN input.

XC018 LP 5V acmpc02_5v is a low-power current-programmable CMOS comparator with hysteresis. The input stage is N-MOS differential pair. The speed and power consumption of the comparator can be controlled by means of the bias current through the IBN input.

XC018 LP 5V arcoc01_5v is a robust 100kHz RC oscillator with internal R and C. The cell features very low temperature coefficient of clock frequency and low power consumption.

XC018 LP 5V arcoc02_5v is a robust 1MHz RC oscillator with internal R and C. The cell features very low temperature coefficient of clock frequency and low power consumption.

XC018 LP 5V arcoc03_5v is an adjustable 100kHz, current-balancing RC oscillator with internal R and C. The very low temperature coefficient of clock frequency combined with trimming inputs, very low power consumption and compact size make the cell ideal s

XC018 LP 5V arcoc04_5v is an adjustable 1MHz, current-balancing RC oscillator with internal R and C. The very low temperature coefficient of the clock frequency combined with trimming inputs, very low power consumption and compact size make the cell ideal

XC018 LP 5V aporc01_5v is a dynamic Power-on-Reset (POR) circuit. During power-on, POR output follows the supply voltage as long as it is below the threshold voltage. When the threshold voltage is reached, the POR signal turns low.

XC018 LP 5V aporc02_5v is a Power-on-Reset (POR) circuit with hysteresis. Reset signals are generated on both the rising and falling edge of the supply voltage.