18 entries, filtered by: Datasheet
Published: February 2011

The CX08 Series is X-FAB‘s 0.8 Micron Modular Mixed Signal Technology. Main target applications are standard cell, semi-custom and full custom designs for Industrial, Telecommunication and Automotive products - including the 42V board net.
Based on a state of the art single poly double metal 0.8-micron drawn gate length N-well process for digital application, various process modules are available for high performance analogue and high voltage circuits.


More
Published: July 2008

The XC10 Series is X-FAB‘s One-Micron Modular Mixed Signal Technology. Main target applications are standard cell, semi-custom and full custom designs for Automotive, Consumer, Industrial and Telecommunication products. The process enables mixed-signal systems on one chip by its nonvolatile memory and sensor integration capabilities.
Based on a state of the art very cost effective single poly single metal 1.0-micron minimum feature size N-well process for mixed-signal and high voltage applications, various process modules are available for high performance analog and high voltage circuits. Using the non-volatile memory modules integration of EEPROM, OTP or NV latches is possible.
Technology variants for integrated MEMS are available.


More
Published: January 2009

The XB06 Series is X-FAB‘s 0.6 Micron BiCMOS Technology. Main target applications are RF circuits and high precision analog applications mixed with digital parts for Telecommunication, Consumer, Automotive and Industrial products. The digital part is fully compatible with X-CMOS 0.6 process family.


More
Published: August 2010

The XHB06 is X-FAB's 0.6 Micron High-Voltage Bipolar CMOS DMOS (BCD) Technology, optimized for applications requiring operating voltages of 5V to 30V. Main target applications are power management, RF circuits and high precision analog applications mixed with digital parts for Telecommunication, Consumer, Automotive and Industrial products. The digital part is fully compatible with X-CMOS 0.6 process family.


More
Published: January 2013

The XT018 series is X-FAB’s 0.18 micron Modular High-voltage SOI CMOS Technology. Based on SOI wafers and the industrial standard single poly with up to six metal layers 0.18-micron drawn gate length process, integrated with high voltage and Non-Volatile-Memory modules, the platform is specifically designed for a new generation of cost-effective "Super Smart Power" technology; operating in temperature range of -40 to 175 °C.


More
Published: April 2011

The XT06 Series completes X-FAB's 0.6 Micron Modular Mixed Signal Technology.
XT06 uses dielectric isolation on SOI wafers. This allows unrestricted 60 V high and low side operation of all devices. The process offers reduced parasitics which results in smaller crosstalk, reduced noise and better EMC characteristics. Thus XT06 allows innovative circuit design with reduced circuit complexity. CMOS as well as Bipolar Transistors are available with breakdown voltages up to 110V.
The 5 V CMOS core is compatible in design rules and transistor performance with state of the art 0.6μm CMOS processes.
For analog applications several capacitor and resistor devices are realized, using the double-poly architecture.


More
Published: July 2013

XDH10 is X-Fab´s dielectric trench insulated smart power technology. Main target applications are analog switch ICs, driver ICs for capacitive, inductive and resistive loads and EL / piezo driver ICs for applications using 220V net supply. The typical breakdown voltage of the HV DMOS devices is >350V or >650V. The modular process combines DMOS, bipolar and CMOS processing steps that are compatible with dielectric insulation to provide a wide variety of MOS and bipolar devices with different voltage levels within a dielectric bi-directional high voltage trench insulation on the same die.


More
Published: May 2012

XDM10 is X-Fab´s dielectric trench insulated smart power technology. Main target applications are analog switch ICs, driver ICs for capacitive, inductive and resistive loads and EL / piezo driver ICs for applications using 110V net supply. The typical breakdown voltage of the HV-DMOS devices is >350 V or >275V. The modular process combines DMOS, bipolar and CMOS processing steps that are compatible with dielectric insulation to provide a wide variety of MOS and bipolar devices with different voltage levels within a dielectric bi-directional high voltage trench insulation on the same die.


More