18 entries, filtered by: Datasheet
Published: November 2013

The XH035 series is X-FAB’s 0.35-micron Modular RF capable Mixed Signal Technology. Main target applications are standard cell, semi-custom and full  custom designs for Industrial, Automotive and Telecommunication products. Based on a single poly, triple metal 0.35-micron drawn gate length process for digital applications, process modules are available such as embedded Non-Volatile Memory, high voltage options, as well as standard or thick fourth layer metal, double-poly and MIM capacitor and high resistance polysilicon.


More
Published: July 2013

XDH10 is X-Fab´s dielectric trench insulated smart power technology. Main target applications are analog switch ICs, driver ICs for capacitive, inductive and resistive loads and EL / piezo driver ICs for applications using 220V net supply. The typical breakdown voltage of the HV DMOS devices is >350V or >650V. The modular process combines DMOS, bipolar and CMOS processing steps that are compatible with dielectric insulation to provide a wide variety of MOS and bipolar devices with different voltage levels within a dielectric bi-directional high voltage trench insulation on the same die.


More
Published: May 2013

The XP018 series is X-FAB’s 0.18 micron Modular Mixed Signal CMOS High Performance Analog Mixed-Signal Technology. Based upon the industrial standard single poly with up to six metal layers 0.18-micron drawn gate length N-well process, integrated with high voltage and Non-Volatile-Memory modules, the platform is engineered for applications needing an integrated solution and cost efficient process for high performance analog ICs. Targeted applications are switching applications, lighting, display, etc; operating in temperature range of -40 to 175 °C.


More
Published: January 2013

The XT018 series is X-FAB’s 0.18 micron Modular High-voltage SOI CMOS Technology. Based on SOI wafers and the industrial standard single poly with up to six metal layers 0.18-micron drawn gate length process, integrated with high voltage and Non-Volatile-Memory modules, the platform is specifically designed for a new generation of cost-effective "Super Smart Power" technology; operating in temperature range of -40 to 175 °C.


More
Published: December 2012

The XH018 series is X-FAB’s 0.18 micron Modular Mixed Signal HV CMOS Technology. Based upon the industrial standard single poly with up to six metal layers 0.18 micron drawn gate length N-well process, integrated with highvoltage and Non-Volatile-Memory modules, the platform is ideal for SOC applications in the automotive market, as well as emdedded high-voltage applications in the communications, consumer and industrial market.
Comprehensive design rules, precise SPICE models, analog and digital libraries, IPs and development kits support the process for major EDA vendors.


More
Published: August 2012

The XA035 Series is X-FAB‘s 0.35 Micron High Temperature CMOS Technology. Main target applications are high temperature automotive and Industrial products with temperature range up to 175ºC. All modules are comparable in Design Rules and Transistor Performance with our corporate state of the art 0.35 μm CMOS Processes. Comprehensive design rules, precise SPICE models, analog and digital libraries, IP’s and development kits support the process on platforms supplied by the major EDA tool vendors.


More
Published: June 2012

The XU035 series is X-FAB’s 0.35-micrometer Modular 700V Ultra-High-Voltage (UHV) Technology. Based upon the standard 1P3M process with single 5V gate oxide, 0.35-micron drawn gate length and metal design rules, the platform is engineered for applications needing an integrated power and startup device solution.


More
Published: May 2012

XDM10 is X-Fab´s dielectric trench insulated smart power technology. Main target applications are analog switch ICs, driver ICs for capacitive, inductive and resistive loads and EL / piezo driver ICs for applications using 110V net supply. The typical breakdown voltage of the HV-DMOS devices is >350 V or >275V. The modular process combines DMOS, bipolar and CMOS processing steps that are compatible with dielectric insulation to provide a wide variety of MOS and bipolar devices with different voltage levels within a dielectric bi-directional high voltage trench insulation on the same die.


More
Published: June 2011

XO035 is X-FAB’s specialized process for optoelectronic and high speed RF applications. It is especially suited for applications needing sensitive high bandwidth photo diodes arrays or CMOS image sensors for such applications as optical data storage, optical data communication or high dynamic range cameras.


More
Published: April 2011

The XT06 Series completes X-FAB's 0.6 Micron Modular Mixed Signal Technology.
XT06 uses dielectric isolation on SOI wafers. This allows unrestricted 60 V high and low side operation of all devices. The process offers reduced parasitics which results in smaller crosstalk, reduced noise and better EMC characteristics. Thus XT06 allows innovative circuit design with reduced circuit complexity. CMOS as well as Bipolar Transistors are available with breakdown voltages up to 110V.
The 5 V CMOS core is compatible in design rules and transistor performance with state of the art 0.6μm CMOS processes.
For analog applications several capacitor and resistor devices are realized, using the double-poly architecture.


More