adc10 * ADC X-FAB 0.80 µm CX08 PT Analog Library CX08A: Analog library. ADC10 is a 10-bit analog-to-digital converter which utilizes successive approximation technique.
adc8 * ADC X-FAB 0.80 µm CX08 PT Schematic CX08A: Analog library. ADC8 is a 8-bit analog-to-digital converter which utilizes successive-approximation
HT_ADC1 ADC IMMS GmbH 1.00 µm XI10 PT GDSII This IP is a cyclic ADC based on RSD algorithm usable as core for embedded applications. The special advantage of this type of ADC is the reduced complexity of hardware resp. layout area because of the reuse of the main stages for each bit. Up to 13 bit o
ADC10 * ADC X-FAB 0.60 µm XB06 PT Layout XB06: A_CELLS. ADC10 is a 10-bit analog-to-digital converter which utilizes successive approximation technique.
ADC8 * ADC X-FAB 0.60 µm XB06 PT Layout XB06: A_CELLS. ADC8 is a 8-bit analog-to-digital converter which utilizes successive-approximation technique.
aadcc01 * ADC X-FAB 0.60 µm XC06 PT Layout XC06: A_CELLS. aadcc01 is a 10-bit successive approximation Analog-to-digital converter (ADC). The ADC operates with a single 5V power supply and an external voltage reference.
aadcc02 * ADC X-FAB 0.60 µm XC06 PT Layout XC06: A_CELLS. aadcc02 is a 8-bit two-step Analog-to-Digital converter (ADC). Due to its two-step architecture aadcc02 features very low power consumption combined with moderate speed and low nonlinearity errors.
aadcc03 * ADC X-FAB 0.60 µm XC06 PT Layout XC06: A_CELLS. aadcc03 is a 8-bit successive approximation Analog-to-digital converter (ADC). The ADC operates with a single 5V power supply and an external voltage reference.
aadcc02 * ADC X-FAB 0.35 μm XH035 PT Layout XH035: A_CELLS. For MOS module only. aadcc02 is a 10-bit successive approximation Analog-to-Digital converter (ADC). The ADC operates with a single 3.3V power supply and external voltage reference.
aadcc01_3v3 * ADC X-FAB 0.18 μm XC018 PT Layout XC018 LP 3.3V aadcc01_3v3 is a 10-bit successive approximation Analog-to-Digital converter (ADC). The ADC operates with a single 3.3V power supply and an external voltage reference.
aadcc01 * ADC X-FAB 0.60 µm XT06 PT Layout XT06 aadcc01 is a 10-bit successive approximation Analog-to-Digital converter (ADC). The ADC operates with a single 5V power supply and an external voltage reference.
aadcc02 * ADC X-FAB 0.60 µm XT06 PT Layout XT06
aadcc03 ADC X-FAB 0.60 µm XT06 PT Layout XT06
AR32X3A ADC Archband Labs Inc. 0.25 μm FC025 PT GDSII AR32X3A is a 16-bit ADC for measurement purpose in 0.25µm node.
ADC12DR ADC A3PICs GmbH 0.60 µm XB06 PT GDSII The ADC12DR is a SAR-based low-power ADC with a 12bit resolution. Its fully differential input stage features a rail-to-rail input range. At a sampling rate of 2MS/s a power consumption of only 10mW is attained applying a 5V power suppl
SA00AH8B00 ADC Sony LSI Design Inc. 0.35 μm XH035 ID GDSII SA00AH8B00 is a subranging 8-bit low-power 25MS/s Analog-to-Digital Converter(ADC) for disk servo use.
SA00AH8A00 ADC Sony LSI Design Inc. 0.35 μm XH035 ID GDSII SA00AH8A00 is a subranging 8-bit high-speed 50MS/s Analog-to-Digital Converter(ADC) for video band and disk servo use.
DT2120 ADC Digian Technology,Inc. 0.35 μm XH035 MP GDSII The dT2120 is designed featuring low-voltage and low-power mono ADC (Analog-to -Digital Converter) for sensor applications. The ADC architecture is using 4th-order 1bit sigma-delta modulator with 64-times oversampling. The dT2120’s in
aadcc01_5v * ADC X-FAB 0.18 μm XC018 PT Analog Library XC018 LP 5V aadcc01_5v is a 10-bit successive approximation Analog-to-Digital converter (ADC). The ADC operated with a single 5.0V analog power supply, 1.8V digital power supply and an external voltage reference.
adacc01_5v * ADC X-FAB 0.18 μm XC018 PT Analog Library XC018 LP 5V is a 10-bit voltage -scaling (potentiometric) digital-to-analog converter (DAC). The DAC operates with a single 5.0V analog power supply, a 1.8V digital power supply and external reference voltage.
CM2013ae ADC chipus 0.35 μm XH035 PT GDSII Low power, general purpose, 10-bit, 50kSPS, Successive Approximation Register (SAR) Analog-to-Digital Converter (ADC) core. The circuit uses one 3.3V analog supply and one 3.3V digital supply and is targeted for microcontroller applications.
aadcc01_3v3 * ADC X-FAB 0.18 μm XH018 PT Analog Library XH018 LP3MOS 3.3V aadcc01_3v3 is a 10-bit successive approximation Analog-to-Digital converter. The ADC operates with a single 3.3V analog power supply; 1.8V digital power supply and an external voltage reference.
abgpc02 * Bandgaps X-FAB 1.00 µm XC10 PT Analog Library XC10: A_CELLS; A_CELLS_M1. abgpc02 is a bandgap reference with Poly2 resistors. The cell doesn’t include an output buffer.
abgpc01 * Bandgaps X-FAB 1.00 µm XC10 PT Analog Library XC10: A_CELLS; A_CELLS_M1. abgpc01 is a bandgap reference with well resistors.
abgpc03 * Bandgaps X-FAB 1.00 µm XC10 PT Analog Library XC10: A_CELLS; A_CELLS_M1. abgpc03 is a bandgap reference with Poly2 resistors. The cell doesn’t include an output buffer.
abgpc01 * Bandgaps X-FAB 0.60 µm XB06 PT Layout XB06: A_CELLS. abgpc01 is a Brokaw, general-purpose bandgap reference source with high resistive poly resistor.
abgpc03 * Bandgaps X-FAB 0.60 µm XB06 PT Layout XB06: A_CELLS. abgpc03 is a badgap reference with high resistive poly resistor.
abgpc01 * Bandgaps X-FAB 0.60 µm XC06 PT Layout XC06: A_CELLS. abgpc01 is a general purpose bandgap reference with N-well resistors. This bandgap cell also provides reference voltage for some bias cells.
abgpc02 * Bandgaps X-FAB 0.60 µm XC06 PT Layout XC06: A_CELLS. abgpc02 is a general purpose bandgap reference with Poly0 resistors. This bandgap cell also provides reference voltage for some bias cells.
abgpc03 * Bandgaps X-FAB 0.60 µm XC06 PT Layout XC06: A_CELLS. abgppc03 is a low-power bandgap reference with Poly0 resistors.
