IP Portal

XH018 LP3MOS 3.3V aopac04_3v3 is a general purpose internally compensated CMOS OpAmp with P-MOS input stage and rail-to-rail output stage. The speed, gain bandwidth, and the power consumption of the amplifier are set by means of a bias current.

XH018 LP3MOS 3.3V acmpc01_3v3 is a low-power current-programmable CMOS comparator with hysteresis. The input stage is P-MOS differential pair.

XH018 LP3MOS 3.3V acmpc02_3v3 is a low-power current-programmable CMOS comparator with hysteresis. The input stage is N-MOS differential pair.

XH018 LP3MOS 3.3V acmpc03_3v3 is a low-power current-programmable CMOS comparator.

XH018 LP3MOS 3.3V arcoc01_3v3 is a robust 100kHz RC oscillator with internal R and C. The cell features very low temperature coefficient of clock frequency and low power temperature.

XH018 LP3MOS 3.3V arcoc02_3v3 is a robust 1MHz RC oscillator with internal R and C. The cell features very low temperature coefficient of clock frequency and low power temperature.

XH018 LP3MOS 3.3V arcoc03_3v3 is an adjustable 100kHz, current-balancing RC oscillator with internal R and C. The very low temperature coefficient of the clock frequency combined with trimming inputs, very low power consumption and compact size.

XH018 LP3MOS 3.3V arcoc04_3v3 is an adjustable 1MHz, current-balancing RC oscillator with internal R and C. The very low temperature coefficient of the clock frequency combined with trimming inputs, very low power consumption and compact size.

XH018 LP3MOS 3.3V aadcc01_3v3 is a 10-bit successive approximation Analog-to-Digital converter. The ADC operates with a single 3.3V analog power supply; 1.8V digital power supply and an external voltage reference.

XH018 LP3MOS 3.3V adacc01_3v3 is a 10-bit voltage-scaling (potentiometric) Digital-to-Analog converter. The adacc01 DAC operates with a single 3.3V analog power supply; a 1.8V digital power supply and an external reference voltage.

XH018 LP3MOS 3.3V aporc02_3v3 is a Power-on-Reset circuit with hysteresis. Reset signal are generated on power-on and power-off transitions. Both high and low (POR and PORB) reset signals are available.

XH018 LP3MOS 3.3V aporc02_3v3 is a Power-on-Reset circuit. Reset signal are generated on power-on and power-off transitions. Both high and low (POR and PORB) reset signals are available.

XH018 LP3MOS 3.3V aregc01_3v3 is a 3.3v/1.8V linear voltage regulator for up to 20mA load current and internal bandgap reference. The regulator is implemented as macro cell that fits into the core-limited I/O ring.

XH018 LP3MOS 3.3V atmpc01_3v3 is a high-temperature alarm cirsuit. When the chip temperature rises over the high threshold temperature (133°C approx) an OVT (active high) signal is activated.

XH035: A_CELLS. For MOS module only. aopac01 is a general purpose internally compensated CMOS OpAmp with N-MOS input stage and rail-to-tail output stage.

XH035: A_CELLS. For MOS module only. aopac02 is a general purpose internally compensated CMOS OpAmp with P-MOS input stage and rail-to-rail output stage.

XH035: A_CELLS. For MOS module only. aopac03 is a general purpose internally compensated rai-to-rail input, rail-to-rail output CMOS OpAmp. It features low input offset voltage and high output driving capabilities.

XH035: A_CELLS. For MOS module only. aopac04 is a general purpose internally compensated rail-to-rail input, rail-to-rail output CMOS OpAmp. Features precision quiescent current control & high output driving capabilities.

XH035: A_CELLS. For MOS module only. aopac05 is a low-power internally compensated with P-MOS input and rail-to-rail output.

XH035: A_CELLS. For MOS module only. aopac06 is a fast internally compensated with N-MOS input and rail-to-rail output.

XH035: A_CELLS. For MOS module only. aopac08 is a general purpose internally compensated operational amplifier with N-MOS input and emitter-follower output.

XH035: A_CELLS. For MOS module only. aopac12 is an internally compensated CMOS differential input - differential output (DIDO) operational amplifier with P-MOS input stage and rail-to-rail output stages.

XH035: A_CELLS. For MOS module only. acmpc01 is a low-power CMOS comparator with hysteresis. The input stage is P-MOS differential pair.

XH035: A_CELLS. For MOS module only. acmpc02 is a low-power CMOS comparator with hysteresis. The input stage is N-MOS differential pair.

XH035: A_CELLS. For MOS module only. acmpc03 is a rail-to-rail CMOS comparator.

XH035: A_CELLS. For MOS module only. acmpc04 is a current-programmable rail-to-rail CMOS voltage comparator. The speed and the power consumption of the cell are programmed by means of bias current.

XH035: A_CELLS. For MOS module only. abgpc01 is a general purpose bandgap reference with N-well resistors.

XH035: A_CELLS. For MOS module only. abgpc02 is a general purpose bandgap reference with Poly2 resistors.

XH035: A_CELLS. For MOS module only. abgpc04 is a general purpose bandgap reference with Poly2 resistors.

XH035: A_CELLS. For MOS module only. abgpc07 is a low-supply voltage bandgap reference with N-well resistors. The cell features low supply current and low noise.