IP Portal

XC018 LP 5V aporc01_5v is a dynamic Power-on-Reset (POR) circuit. During power-on, POR output follows the supply voltage as long as it is below the threshold voltage. When the threshold voltage is reached, the POR signal turns low.

XC018 LP 5V aporc02_5v is a Power-on-Reset (POR) circuit with hysteresis. Reset signals are generated on both the rising and falling edge of the supply voltage.

XC018 LP 5V aporc03_5v is a Power-on-Reset (POR) circuit. Reset signals are generated on both the rising and falling edge of the supply voltage.

XT06 aopac01 is a general purpose internally compensated CMOS OpAmp with P-MOS input stage and source follower output stage.

XT06 aopac02 is a fast internally compensated CMOS OpAmp with N-MOS input stage and rail-to-rail output stage.

XT06 aopac03 is a general purpose internally compensated CMOS OpAmp with N-MOS input stage and bipolar emitter follower output stage.

XT06 aopac06 is a general purpose internally compensated CMOS OpAmp with N-MOS input stage and rail-to-rail output stage.

XT06 aopac07 is a general purpose internally compensated CMOS OpAmp with P-MOS input stage and rail-to-rail output stage.

XT06 aopac08 is a general purpose internally compensated CMOS OpAmp with rail-to-rail input stage and rail-to-rail output stage.

XT06 aopac09 is a fast internally compensated CMOS OpAmp with N-MOS input stage and P-MOS source follower output stage.

XT06 aopac10 is a fast internally compensated CMOS OpAMp with P-MOS input stage and N-MOS source follower output stage.

XT06 aopac11 is a low-power, internally compensated CMOS OpAmp with P-MOS input stage and N-MOS source follower output stage.

XT06 aopac12 is a low-power, internally compensated CMOS OpAmp with N-MOS input stage and P-MOS source follower output stage.

XT06 acmpc01 is a low-power CMOS comparator with N-MOS input stage.

XT06 acmpc02 is a low-power CMOS comparator with P-MOS input stage.

XT06 acmpc03 is a fast CMOS comparator with N-MOS input stage. A 15mV (typ.) hysteresis is intentionally introduced to ensure proper operation.

XT06 acmpc04 is a fast CMOS comparator with P-MOS input stage. A 15mV (typ.) hysteresis is intentionally introduced to ensure proper operation.

XT06 acmpc06 is a fast rail-to-rail CMOS voltage comparator.

XT06 abgpc01 i a general purpose bandgap reference with PDIFF resistor in NWELL (rdiffp3). THis bandgap cell also provides reference voltage for some bias cell.

XT06 abgpc02 is a general purpose bandgap reference with high resistive poly0 resistor (rpolyh). This bandgap cell also provides reference voltage for some bias cells.

XT06 abgpc03 is a bandgap reference with low temperature coefficient poly0 resistor (rpoly0).

XT06 

XTabiac01 is a general purpose low-current bias cell. the circuit forces a current of 200nA (approx.) to flow through P- or N- MOS with W/L ratio of 10µm/12µm.

XT06 abiac02 is a general purpose bias cell. The circuit forces a current of 2µA (approx.) to flow through P- or N- MOS with W/L ratio of 10µm/10µm.

XT06 abiac03 is a general purpose biac cell. The circuit forces a current of10µA (approx.) to flow through P- or N- MOS with W/L ratio of 10µm/6µm.

XT06 abiac05 is a general purpose VTH - based bias cell, a cheaper substitute for abiac02. The circuit forces a current of 2µA (approx.) to flow through P- or N- MOS with W/L ratio of 10µm/10µm.

XT06 abiac06 is a general purpose V_TH - based bias cell, a cheaper substitute for abiac03. The circuit forces a current of 10µA (approx.) to flow through P- or N- MOS with W/L ration of 10µm/6µm.

XT06 aadcc01 is a 10-bit successive approximation Analog-to-Digital converter (ADC). The ADC operates with a single 5V power supply and an external voltage reference.

XT06

XT06