IP Portal

XC06: A_CELLS. arcoc05 is a 1MHz fixed frequency, current balancing RC oscillator with internal R and C.

XC06: A_CELLS. arcoc06 is a 1MHz adjustable, current balancing RC oscillator with internal R and C.

XC06: A_CELLS. axtoc01 is a 32 kHz crystal oscillator for 3.5 to 5.5V supply voltage range. An external quartz crystal has to be connected to the XTLIN and XTALOUT pins. No other external components are required.

XC06: A_CELLS. axtoc02 is a 1...4 MHz crystal oscillator for supply voltage range from 3.5 to 5.5V An external quartz crystal has to be connected to the XTLIN and XTALOUT pins. No other external components are required.

XC06: A_CELLS. axtoc03 is a 2...6 MHz crystal oscillator for supply voltage range from 3.5 to 5.5V. An external quartz crystal has to be connected to the XTALIN and XTALOUT pins. No other external components are required.

XC06: A_CELLS.

XC06: A_CELLS. aporc01 is a dynamic Power-on-Reset circuit. During power-on, POR output is kept high as long as the supply voltage is bellow the POR threshold voltage. When the threshold voltage is reached, the POR signal turns low. A delay of few microse

XC06: A_CELLS. aporc02 is a Power-on-Reset circuit with hysteresis. Reset signals are generated on both the rising and falling edge of the supply voltage. During power-on, POR output is kept high as long as the supply voltage is bellow the high threshold

XC06: A_CELLS. aporc03 is a Power-on-Reset circuit. Reset signals are generated on both the rising and falling edge of the supply voltage. During power-on, POR output is kept low as long as the supply voltage is bellow the threshold voltage. When the high

XC06: A_CELLS. achpc01 is a doubling charge pump 3.3V -> 5.7V. All capacitors are internal.

XT06 aopac01 is a general purpose internally compensated CMOS OpAmp with P-MOS input stage and source follower output stage.

XT06 aopac02 is a fast internally compensated CMOS OpAmp with N-MOS input stage and rail-to-rail output stage.

XT06 aopac03 is a general purpose internally compensated CMOS OpAmp with N-MOS input stage and bipolar emitter follower output stage.

XT06 aopac06 is a general purpose internally compensated CMOS OpAmp with N-MOS input stage and rail-to-rail output stage.

XT06 aopac07 is a general purpose internally compensated CMOS OpAmp with P-MOS input stage and rail-to-rail output stage.

XT06 aopac08 is a general purpose internally compensated CMOS OpAmp with rail-to-rail input stage and rail-to-rail output stage.

XT06 aopac09 is a fast internally compensated CMOS OpAmp with N-MOS input stage and P-MOS source follower output stage.

XT06 aopac10 is a fast internally compensated CMOS OpAMp with P-MOS input stage and N-MOS source follower output stage.

XT06 aopac11 is a low-power, internally compensated CMOS OpAmp with P-MOS input stage and N-MOS source follower output stage.

XT06 aopac12 is a low-power, internally compensated CMOS OpAmp with N-MOS input stage and P-MOS source follower output stage.

XT06 acmpc01 is a low-power CMOS comparator with N-MOS input stage.

XT06 acmpc02 is a low-power CMOS comparator with P-MOS input stage.

XT06 acmpc03 is a fast CMOS comparator with N-MOS input stage. A 15mV (typ.) hysteresis is intentionally introduced to ensure proper operation.

XT06 acmpc04 is a fast CMOS comparator with P-MOS input stage. A 15mV (typ.) hysteresis is intentionally introduced to ensure proper operation.

XT06 acmpc06 is a fast rail-to-rail CMOS voltage comparator.

XT06 abgpc01 i a general purpose bandgap reference with PDIFF resistor in NWELL (rdiffp3). THis bandgap cell also provides reference voltage for some bias cell.

XT06 abgpc02 is a general purpose bandgap reference with high resistive poly0 resistor (rpolyh). This bandgap cell also provides reference voltage for some bias cells.

XT06 abgpc03 is a bandgap reference with low temperature coefficient poly0 resistor (rpoly0).

XT06 

XTabiac01 is a general purpose low-current bias cell. the circuit forces a current of 200nA (approx.) to flow through P- or N- MOS with W/L ratio of 10µm/12µm.