IP Portal

SA00DJAA00 is a high-speed  50MS/s Digital-to-Analog Converter(DAC) for video band use.

The dT2120 is designed featuring low-voltage and low-power mono ADC (Analog-to -Digital Converter) for sensor applications. The ADC architecture is using 4th-order 1bit sigma-delta modulator with 64-times oversampling. The dT2120’s in

General purpose linear voltage regulator. The circuit generates a 3.3V output voltage from an unregulated input voltage ranging from 5V to 30V. It features short circuit protection and 5mA output current capability.

2Low consumption Power-On Reset (POR) core. The core has a voltage sense (configurable 0.9V - 5.5V), an internal current bias circuit and two configurable assertion delays (default are > 1μs and > 20μs). A configurable hysteresis (default 100mV).

Low consumption combo voltage and current reference core. The circuit generates an unbuffered 1.29V, temperature compensated voltage reference (70ppm/°C) and provides a 1.6μA PMOS current branch (200ppm/°C).

Low power, general purpose, 10-bit, 50kSPS, Successive Approximation Register (SAR) Analog-to-Digital Converter (ADC) core. The circuit uses one 3.3V analog supply and one 3.3V digital supply and is targeted for microcontroller applications.

General purpose, low power internal oscillator core, 12MHz. The circuit has internal level shifting and start-up circuits. A 4-bit digital bus allows frequency calibration against process variations. Current consumption <40μA, supply voltage 2.7V-3.6V

General purpose capacitive sensor core. The circuit is intended for touch sensing applications for use in microcontrollers and has two multiplexed inputs. 3pF input sensibility and output frequency of 460kHz - 600kHz.

30V/20mA Power Driver/Switch - Two modes of operation: switch or programmable current output; short-circuit protection, over-current detection.

Low Power, Wide Supply Range, CMOS, output to pos rail

Ultra high efficiency programmable output voltage over wide input voltage range, buck/boost. Input: 1.5V - 15V. Output 2V-6V

Ultra Low Power, Wide Supply Range, CMOS

Low Power, Wide Supply Range, CMOS

High Voltage Input for input voltages up to 100V

250kHz PWM for DC-DC converters

XB06: A_CELLS. aopac02 is an internal frequency-compensated CMOS operational amplifier with p-mos input stage

XC018 LP 3.3V abiac03_3v3 is a general purpose bias cell. The circuit forces a current of 10µA (approx.) to flow through PMOS with W/L ratio of 24µm/2µm and NMOS with W/L ratio od 14µm/6µm.

XC018 LP 3.3V aopac02_3v3 is a general purpose internally compensated CMOS OpAmp with P-MOS input stage and rail-to-rail output stage. The speed, gain bandwidth, and the power consumption of the amplifier are set by means of bias current.

XC018 LP 3.3V aopac01_3v3 is a general purpose internally compensated CMOS OpAmp with N-MOS input stage and rail-to-rail output stage. The speed, gain bandwidth, and the power consumption of the amplifier are set by means of a bias current.

XC018 LP 3.3V acsoc02_3v3 is a compact general purpose current source. The circuit has four outputs that drive currents of 1µA; 2µA; 4µA; and 8µA, respectively.

XC018 LP 3.3V acsoc01_3v3 is a compact general purpose current source. The circuit has four outputs that drive currents of 200nA each. 

XB06: A_CELLS. aopac03 is a fast internal frequency-compensated CMOS operational amplifier with p-mos input stage

XB06: A_CELLS. aopac05 is a low power internal frequency-compensated CMOS operational amplifier with nmos input stage

XB06: A_CELLS. aopac06 is an internal frequency-compensated CMOS operational amplifier with n-mos input stage

XB06: A_CELLS. aopac07 is a fast internal frequency-compensated CMOS operational amplifier with n-mos input stage.

XB06: A_CELLS. aopac09 is an internal frequency-compensated CMOS operational amplifier with p-mos input stage and rail-to-rail output stage.

XB06: A_CELLS. aopac10 is an internal frequency-compensated CMOS operational amplifier with rail-to-rail input stage and rail-to-rail output stage.

XB06: A_CELLS. acmpc01 is a low-power two-stage CMOS comparator with n-mos input stage and a CMOS-output stage.

XB06: A_CELLS. acmpc03 is a low-power two-stage CMOS comparator with n-mos input stage and a CMOS-output stage.

XB06: A_CELLS. acmpc04 is a two-stage CMOS comparator with p-mos input stage and a CMOS-output stage.