IP Portal

XC018 LP 3.3V abiac02_3v3 is a general purpose bias cell. The circuit forces a current of 2µA (approx.) to flow through PMOS with W/L ratio of 10µm/4µm and NMOS with W/L ratio od 6µm/12µm.

XC018 LP 3.3V abiac03_3v3 is a general purpose bias cell. The circuit forces a current of 10µA (approx.) to flow through PMOS with W/L ratio of 24µm/2µm and NMOS with W/L ratio od 14µm/6µm.

XC018 LP 5V abiac06_5v is a general purpose bias cell. The circuit forces a current of 10µA (approx.) to flow through PMOS with W/L ratio of 24µm/3µm and NMOS with W/L ratio of 10µm/4µm.

XC018 LP 5V abiac07_5v is a general purpose bias cell. The circuit forces a current of 2µA (approx.) to flow through PMOS with W/L ratio of 10µm/6µm and NMOS with W/L ratio of 10µm/12µm.

XTabiac01 is a general purpose low-current bias cell. the circuit forces a current of 200nA (approx.) to flow through P- or N- MOS with W/L ratio of 10µm/12µm.

XT06 abiac02 is a general purpose bias cell. The circuit forces a current of 2µA (approx.) to flow through P- or N- MOS with W/L ratio of 10µm/10µm.

XT06 abiac03 is a general purpose biac cell. The circuit forces a current of10µA (approx.) to flow through P- or N- MOS with W/L ratio of 10µm/6µm.

XT06 abiac05 is a general purpose VTH - based bias cell, a cheaper substitute for abiac02. The circuit forces a current of 2µA (approx.) to flow through P- or N- MOS with W/L ratio of 10µm/10µm.

XT06 abiac06 is a general purpose V_TH - based bias cell, a cheaper substitute for abiac03. The circuit forces a current of 10µA (approx.) to flow through P- or N- MOS with W/L ration of 10µm/6µm.

XC10: A_CELLS; A_CELLS_M1. achpc01 is doubling charge pump 5V to 8.75V.

XC10: A_CELLS; A_CELLS_M1. achpc02 is a 4-stage Dickson charge pump originally designed for EEPROM.

XC06: A_CELLS. achpc01 is a doubling charge pump 3.3V -> 5.7V. All capacitors are internal.

XT06 achpc01 is a doubling charge pump 3.3V => 5.6V.

XC10: A_CELLS; A_CELLS_M1. acmpc03 is a general purpose, low-consumption voltage comparator with N-MOS input.

XC10: A_CELLS; A_CELLS_M1. acmpc04 is a general purpose, low power voltage comparator with P-MOS input.

XC10: A_CELLS; A_CELLS_M1. acmpc01 is a general purpose voltage comparator with P-MOS input and hysteresis.

XB06: A_CELLS. acmpc01 is a low-power two-stage CMOS comparator with n-mos input stage and a CMOS-output stage.

XB06: A_CELLS. acmpc03 is a low-power two-stage CMOS comparator with n-mos input stage and a CMOS-output stage.

XB06: A_CELLS. acmpc04 is a two-stage CMOS comparator with p-mos input stage and a CMOS-output stage.

XB06: A_CELLS. acmpc06 is a two-stage CMOS comparator with p-mos input stage and a CMOS-output stage.

XB06: A_CELLS. acmpc10 is a CMOS comparator with rail-to-rail input stage and rail-to-rail output stage.

XB06: A_CELLS. acmpc11 is low offset CMOS comparator with rail-to-rail input stage and rail-to-rail output stage.

XC06: A_CELLS. acmpc01 is a low-power CMOS comparator with N-MOS input stage.

XC06: A_CELLS. acmpc03 is a fast CMOS voltage comparator with N-MOS input stage. A hysteresis of some 14mV (typ) is intentionally introduced to ensure proper operation.

XC06: A_CELLS. acmpc04 is a fast CMOS voltage comparator with P-MOS input stage. A hysteresis of some 14 mV (typ) is intentionally introduced to ensure proper operation.

XC06: A_CELLS. acmpc06 is a fast rail-to-rail CMOS voltage comparator.

XH035: A_CELLS. For MOS module only. acmpc01 is a low-power CMOS comparator with hysteresis. The input stage is P-MOS differential pair.

XH035: A_CELLS. For MOS module only. acmpc02 is a low-power CMOS comparator with hysteresis. The input stage is N-MOS differential pair.

XH035: A_CELLS. For MOS module only. acmpc03 is a rail-to-rail CMOS comparator.

XH035: A_CELLS. For MOS module only. acmpc04 is a current-programmable rail-to-rail CMOS voltage comparator. The speed and the power consumption of the cell are programmed by means of bias current.